Problèmes et questions concernant l'édition XFCE.

Ecran noir au démarrage

#1Messageil y a 2 ans

:salut:

En journée quand je Démarre ou Redémarre no souci, par contre après l'arrêt de la nuit au démarrage il ne m'affiche pas la ligne
dev/sda : clean...........
et arrivé à l'écran démarrage je vois la page d'accueil Manjaro mais seulement 1 seconde et écran noir

Ecran noir au démarrage

#2Messageil y a 2 ans

Bonjour.
Passe en TTY Ctrl+Alt+F2 et tente de te loguer à ton username, puis startxfce4.
si c'est bon, c'est que ça vient de lightDM, sinon, il nous faudra les logs :

cat /var/log/Xorg.0.log |curl -F 'f:1=<-' ix.io
Cette instruction retournera une clé donnant accès à la sauvegarde web. Elle sera de la forme http://ix.io/RETOURFUNCTION qu'il faudra publier ici.

Ecran noir au démarrage

#3Messageil y a 2 ans

Ok merci je fais ça dés que possible

J'aurais du précisé qu'après quelque débranchages j'arrive à démarrer.

Ecran noir au démarrage

#4Messageil y a 2 ans

Ecran noir au démarrage

#5Messageil y a 2 ans

Je n'arrive plus à démarrer.

Quand je veux accéder au démarrage USB l'écran devient aussi noir
Dernière modification par Breizil29il y a 2 ans, modifié au total 1 fois.

Ecran noir au démarrage

#6Messageil y a 2 ans

De mémoire, (je n'ai pas mon pc avec moi), xorg écrit dans $HOME un fichier de conf utilisateur. Ce genre de problème peut apparaître si ta partition est saturée. Regarde avec /df -Th.

Ecran noir au démarrage

#7Messageil y a 2 ans

Passe en TTY Ctrl+Alt+F2 et tente de te loguer à ton username, puis startxfce4.
Je résume :
(EE)
Fatal server error :
(EE) Server..........trop long, remove /tmp/.X0-lock
and start again
............ for help
xinit : connection to X server lost

Ecran noir au démarrage

#8Messageil y a 2 ans

De mémoire, (je n'ai pas mon pc avec moi), xorg écrit dans $HOME un fichier de conf utilisateur. Ce genre de problème peut apparaître si ta partition est saturée. Regarde avec /df -Th.
Aucun fichier ou dossier de ce type

Ecran noir au démarrage

#9Messageil y a 2 ans

Extrait du Wiki d'Arch in rozbif :
Black screen, No protocol specified.., Resource temporarily unavailable for all or some users

X creates configuration and temporary files in current user's home directory. Make sure there is free disk space available on the partition your home directory resides in. Unfortunately, X server does not provide any more obvious information about lack of disk space in this case.
Je viens de rentrer et de regarder, effectivement, rien . Toutefois, j'ai souvenir de soucis Xorg en lançant startx depuis un espace utilisateur saturé.

Ecran noir au démarrage

#10Messageil y a 2 ans

a voir

[   248.508] (EE) event5  - Microsoft Microsoft® Nano Transceiver v2.0 Mouse: client bug: event processing lagging behind by 17ms, your system is too slow
[   314.409] (EE) event5  - Microsoft Microsoft® Nano Transceiver v2.0 Mouse: client bug: event processing lagging behind by 21ms, your system is too slow
[   437.893] (EE) event5  - Microsoft Microsoft® Nano Transceiver v2.0 Mouse: client bug: event processing lagging behind by 21ms, your system is too slow
[   484.458] (EE) event5  - Microsoft Microsoft® Nano Transceiver v2.0 Mouse: client bug: event processing lagging behind by 20ms, your system is too slow
[   484.458] (EE) client bug: timer event5 debounce short: scheduled expiry is in the past (-8ms), your system is too slow
[   566.481] (II) Axis 0x1 value 4839 is outside expected range [1256, 4600]
See https://wayland.freedesktop.org/libinput/doc/1.18.0/absolute_coordinate_ranges.html for details
[  1454.015] (EE) event12 - SynPS/2 Synaptics TouchPad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.18.0/touchpad-jumping-cursors.html for details
[  1454.039] (EE) event12 - SynPS/2 Synaptics TouchPad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.18.0/touchpad-jumping-cursors.html for details
[  1454.460] (EE) event12 - SynPS/2 Synaptics TouchPad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.18.0/touchpad-jumping-cursors.html for details
[  1454.706] (EE) event12 - SynPS/2 Synaptics TouchPad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.18.0/touchpad-jumping-cursors.html for details
[  1454.959] (EE) event12 - SynPS/2 Synaptics TouchPad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.18.0/touchpad-jumping-cursors.html for details
[  1454.959] (EE) event12 - SynPS/2 Synaptics TouchPad: WARNING: log rate limit exceeded (5 msgs per 2h). Discarding future messages.
[  1749.668] (EE) event5  - Microsoft Microsoft® Nano Transceiver v2.0 Mouse: client bug: event processing lagging behind by 11ms, your system is too slow
[  1749.668] (EE) event5  - Microsoft Microsoft® Nano Transceiver v2.0 Mouse: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.

Ecran noir au démarrage

#11Messageil y a 2 ans

Je viens de rentrer et de regarder, effectivement, rien . Toutefois, j'ai souvenir de soucis Xorg en lançant startx depuis un espace utilisateur saturé.
Mon SSD il n'y a que mon OS dessus, je n'ai qu'une partition, pleine à 5%
stephane a écrit : il y a 2 ans a voir

[   248.508] (EE) event5  - Microsoft Microsoft® Nano Transceiver v2.0 Mouse: client bug: event processing lagging behind by 17ms, your system is too slow
[   314.409] (EE) event5  - Microsoft Microsoft® Nano Transceiver v2.0 Mouse: client bug: event processing lagging behind by 21ms, your system is too slow
[   437.893] (EE) event5  - Microsoft Microsoft® Nano Transceiver v2.0 Mouse: client bug: event processing lagging behind by 21ms, your system is too slow
[   484.458] (EE) event5  - Microsoft Microsoft® Nano Transceiver v2.0 Mouse: client bug: event processing lagging behind by 20ms, your system is too slow
[   484.458] (EE) client bug: timer event5 debounce short: scheduled expiry is in the past (-8ms), your system is too slow
[   566.481] (II) Axis 0x1 value 4839 is outside expected range [1256, 4600]
See https://wayland.freedesktop.org/libinput/doc/1.18.0/absolute_coordinate_ranges.html for details
[  1454.015] (EE) event12 - SynPS/2 Synaptics TouchPad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.18.0/touchpad-jumping-cursors.html for details
[  1454.039] (EE) event12 - SynPS/2 Synaptics TouchPad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.18.0/touchpad-jumping-cursors.html for details
[  1454.460] (EE) event12 - SynPS/2 Synaptics TouchPad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.18.0/touchpad-jumping-cursors.html for details
[  1454.706] (EE) event12 - SynPS/2 Synaptics TouchPad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.18.0/touchpad-jumping-cursors.html for details
[  1454.959] (EE) event12 - SynPS/2 Synaptics TouchPad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.18.0/touchpad-jumping-cursors.html for details
[  1454.959] (EE) event12 - SynPS/2 Synaptics TouchPad: WARNING: log rate limit exceeded (5 msgs per 2h). Discarding future messages.
[  1749.668] (EE) event5  - Microsoft Microsoft® Nano Transceiver v2.0 Mouse: client bug: event processing lagging behind by 11ms, your system is too slow
[  1749.668] (EE) event5  - Microsoft Microsoft® Nano Transceiver v2.0 Mouse: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages.
Ce qui signifie que ma souris serait la cause donc si je la débranche ou achete une autre ça réglerais mon pb

Ecran noir au démarrage

#12Messageil y a 2 ans

:salut:

De nouvelle infos :

- Après arrêt total au redémarrage il ne m'affiche même pas mon écran du bios

- Et après quel que arrêt violent c'est bon

- Et testé en branchant un câble VGA j'ai pu démarrer tranquillement et l'écran et revenu et j'ai débranché VGA

Ecran noir au démarrage

#13Messageil y a 2 ans

[gg@Manjaro-Xfce ~]$ uname -r
5.12.9-1-MANJARO
[gg@Manjaro-Xfce ~]$ inxi -Fxzc0
System:
  Kernel: 5.12.9-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0 
  Desktop: Xfce 4.16.0 Distro: Manjaro Linux base: Arch Linux 
Machine:
  Type: Laptop System: Hewlett-Packard product: HP Compaq 6830s v: F.0D 
  serial: <filter> 
  Mobo: Hewlett-Packard model: 30E9 v: KBC Version 95.1C serial: <filter> 
  BIOS: Hewlett-Packard v: 68PZD Ver. F.0D date: 04/07/2009 
CPU:
  Info: Dual Core model: Intel Core2 Duo T6570 bits: 64 type: MCP 
  arch: Penryn rev: A cache: L2: 2 MiB 
  flags: lm nx pae sse sse2 sse3 sse4_1 ssse3 bogomips: 8382 
  Speed: 1771 MHz min/max: 1200/2101 MHz boost: enabled Core speeds (MHz): 
  1: 1771 2: 1399 
Graphics:
  Device-1: AMD RV620/M82 [Mobility Radeon HD 3410/3430] 
  vendor: Hewlett-Packard driver: radeon v: kernel bus-ID: 01:00.0 
  Device-2: Chicony CKF7063 Webcam (HP) type: USB driver: uvcvideo 
  bus-ID: 1-5:3 
  Display: x11 server: X.Org 1.20.11 driver: loaded: ati,radeon 
  unloaded: modesetting resolution: 1440x900~60Hz 
  OpenGL: renderer: AMD RV620 (DRM 2.50.0 / 5.12.9-1-MANJARO LLVM 12.0.0) 
  v: 3.3 Mesa 21.1.2 direct render: Yes 
Audio:
  Device-1: Intel 82801I HD Audio vendor: Hewlett-Packard 
  driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 
  Sound Server-1: ALSA v: k5.12.9-1-MANJARO running: yes 
  Sound Server-2: JACK v: 0.125.0 running: no 
  Sound Server-3: PulseAudio v: 14.2 running: yes 
  Sound Server-4: PipeWire v: 0.3.30 running: no 
Network:
  Device-1: Intel PRO/Wireless 5100 AGN [Shiloh] Network driver: iwlwifi 
  v: kernel port: 7000 bus-ID: 03:00.0 
  IF: wlp3s0 state: up mac: <filter> 
  Device-2: Marvell 88E8072 PCI-E Gigabit Ethernet vendor: Hewlett-Packard 
  driver: sky2 v: 1.30 port: 2000 bus-ID: 86:00.0 
  IF: ens5 state: down mac: <filter> 
Bluetooth:
  Device-1: HP Bluetooth 2.0 Interface [Broadcom BCM2045] type: USB 
  driver: btusb v: 0.8 bus-ID: 3-1:2 
  Report: rfkill ID: hci0 rfk-id: 3 state: up address: see --recommends 
Drives:
  Local Storage: total: 223.57 GiB used: 16.24 GiB (7.3%) 
  ID-1: /dev/sda vendor: Drevo model: X1 SSD size: 223.57 GiB 
Partition:
  ID-1: / size: 219 GiB used: 15.16 GiB (6.9%) fs: ext4 dev: /dev/sda1 
Swap:
  ID-1: swap-1 type: zram size: 1.9 GiB used: 0 KiB (0.0%) dev: /dev/zram0 
  ID-2: swap-2 type: zram size: 1.9 GiB used: 0 KiB (0.0%) dev: /dev/zram1 
Sensors:
  System Temperatures: cpu: 64.0 C mobo: 47.0 C 
  Fan Speeds (RPM): N/A 
Info:
  Processes: 186 Uptime: 1h 10m Memory: 3.81 GiB used: 1.44 GiB (37.9%) 
  Init: systemd Compilers: gcc: 11.1.0 clang: 12.0.0 Packages: 1252 
  Shell: Bash v: 5.1.8 inxi: 3.3.04 
[gg@Manjaro-Xfce ~]$ systemctl status display-manager
● lightdm.service - Light Display Manager
     Loaded: loaded (/usr/lib/systemd/system/lightdm.service; enabled; vendor p>
     Active: active (running) since Tue 2021-07-06 07:55:59 CEST; 1h 19min ago
       Docs: man:lightdm(1)
   Main PID: 399 (lightdm)
      Tasks: 9 (limit: 4655)
     Memory: 99.6M
        CPU: 3min 35.727s
     CGroup: /system.slice/lightdm.service
             ├─ 399 /usr/bin/lightdm
             └─1051 /usr/lib/Xorg :0 -seat seat0 -auth /run/lightdm/root/:0 -no>

juil. 06 07:55:59 Manjaro-Xfce systemd[1]: Starting Light Display Manager...
juil. 06 07:55:59 Manjaro-Xfce systemd[1]: Started Light Display Manager.
juil. 06 07:56:05 Manjaro-Xfce lightdm[1062]: pam_unix(lightdm-greeter:session)>
juil. 06 07:56:07 Manjaro-Xfce lightdm[1114]: gkr-pam: unable to locate daemon >
juil. 06 07:56:07 Manjaro-Xfce lightdm[1114]: gkr-pam: stashed password to try >
juil. 06 07:56:07 Manjaro-Xfce lightdm[1114]: pam_systemd_home(lightdm:account)>
juil. 06 07:56:07 Manjaro-Xfce lightdm[1114]: pam_unix(lightdm:session): sessio>
juil. 06 07:56:07 Manjaro-Xfce lightdm[1114]: pam_env(lightdm:session): depreca>
juil. 06 07:56:07 Manjaro-Xfce lightdm[1114]: gkr-pam: gnome-keyring-daemon sta>

[gg@Manjaro-Xfce ~]$ journalctl -b -1|grep err
juil. 06 05:43:02 Manjaro-Xfce kernel: ACPI: IRQ0 used by override.
juil. 06 05:43:02 Manjaro-Xfce kernel: ACPI: IRQ9 used by override.
juil. 06 05:43:02 Manjaro-Xfce kernel: ACPI: EC: interrupt blocked
juil. 06 05:43:02 Manjaro-Xfce kernel: ACPI: Using IOAPIC for interrupt routing
juil. 06 05:43:02 Manjaro-Xfce kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
juil. 06 05:43:02 Manjaro-Xfce kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
juil. 06 05:43:02 Manjaro-Xfce kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
juil. 06 05:43:02 Manjaro-Xfce kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
juil. 06 05:43:02 Manjaro-Xfce kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
juil. 06 05:43:02 Manjaro-Xfce kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
juil. 06 05:43:02 Manjaro-Xfce kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
juil. 06 05:43:02 Manjaro-Xfce kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
juil. 06 05:43:02 Manjaro-Xfce kernel: ACPI: EC: interrupt unblocked
juil. 06 05:43:02 Manjaro-Xfce kernel: pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
juil. 06 05:43:02 Manjaro-Xfce kernel: pciehp 0000:00:1c.1:pcie004: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
juil. 06 05:43:02 Manjaro-Xfce kernel: pciehp 0000:00:1c.2:pcie004: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
juil. 06 05:43:02 Manjaro-Xfce kernel: pciehp 0000:00:1c.4:pcie004: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
juil. 06 05:43:02 Manjaro-Xfce kernel: pciehp 0000:00:1c.5:pcie004: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
juil. 06 05:43:02 Manjaro-Xfce kernel: fbcon: Deferring console take-over
juil. 06 05:43:07 Manjaro-Xfce alsactl[841]: alsa-lib parser.c:242:(error_node) UCM is not supported for this HDA model (HDA Intel at 0xd8500000 irq 32)
juil. 06 05:43:07 Manjaro-Xfce alsactl[841]: alsa-lib main.c:1402:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -6
juil. 06 05:44:28 Manjaro-Xfce kernel: ACPI: EC: interrupt blocked
juil. 06 05:44:28 Manjaro-Xfce kernel: ACPI: EC: interrupt unblocked
juil. 06 05:45:17 Manjaro-Xfce kernel: ACPI: EC: interrupt blocked
juil. 06 05:45:17 Manjaro-Xfce kernel: ACPI: EC: interrupt unblocked
[gg@Manjaro-Xfce ~]$ dmesg |grep err
dmesg: échec de lecture du tampon de noyau: Opération non permise
[gg@Manjaro-Xfce ~]$ sudo dmesg |grep err
[sudo] Mot de passe de gg : 
[    0.050666] ACPI: IRQ0 used by override.
[    0.050668] ACPI: IRQ9 used by override.
[    0.348761] ACPI: EC: interrupt blocked
[    0.593614] ACPI: Using IOAPIC for interrupt routing
[    0.625603] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.625721] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.625840] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.625956] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.626075] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.626188] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.626302] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.626415] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.628985] ACPI: EC: interrupt unblocked
[    0.865301] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum)
[    0.865768] pcieport 0000:00:1c.1: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum)
[    0.866233] pcieport 0000:00:1c.2: pciehp: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum)
[    0.866703] pcieport 0000:00:1c.4: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum)
[    0.867166] pcieport 0000:00:1c.5: pciehp: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum)
[    0.867527] fbcon: Deferring console take-over
[gg@Manjaro-Xfce ~]$ 

Ecran noir au démarrage

#14Messageil y a 2 ans

Ecran noir au démarrage

#15Messageil y a 2 ans

Plus que ce problème à résoudre et pas des moindres et mon Manjaro Xfce sera parfait
Dit moi aussi si il faut que j'abandonne Manjaro et m'oriente vers une autre distri

Ecran noir au démarrage

#16Messageil y a 2 ans

Il y a une solution :

NE PLUS ETEINDRE MON PC

Ecran noir au démarrage

#17Messageil y a 2 ans

* La sortie vidéo est redirigée vers le port HDMI. Allumez la télé et rentrez votre identifiant

et si moi c'était vers VGA
Comment corrigé ça ?

Ecran noir au démarrage

#18Messageil y a 2 ans

essaye avec un noyau 5.10 lts ( ou 5.4 LTS )

Ecran noir au démarrage

#19Messageil y a 2 ans

c'est fait avec les 3 lts et le 12

Ecran noir au démarrage

#20Messageil y a 2 ans

quand je ferme et rouvre mon ecran plusieurs fois des fois ça accroche c'est comme si il y avait un manque de puissance
Répondre