Tout ce qui concerne internet
#1Messageil y a 2 ansBonjour à tous, c'est avec un grand désespoir que je vous solicite.
Il y a deux semaines j'ai monté une nouvelle configuration, jai' une carte mère ASUS TUF GAMING B550M-E avec wifi intégré.
Bref j'ai installé Manjaro dès que jai monté mon pc sur un SSD et tout fonctionnait, puis une semaine après j'ai recu mon deuxieme SSD pour windows sur lequel je joue.
Après l'installation de windows 11 en retournant sur manjaro j'avais perdu le wifi mais toujours fonctionel sur windows.
J'ai donc trifouillé et finallement j'ai supprimé windows, installé manjaro pas dessus, puis supprimé manjaro sur le second SSD.
Et sur le premier j'ai d'abord tenté de booter sur une clé de manjaro, ensuite j'ai tenté d'installer archcraft puis de repasser sous un manjaro tout neuf et mis a jour et j'ai toujours mon problème . je suis perdu.
Le noyau est Linux5.15.28-1 #2Messageil y a 2 anstu peux nous fournir dan un premier temps
Macpro quad 2008 - Ati5770 - Xeon 2,8Ghz 8Go Os X 10.6.8 - Linux - Manjaro 22.0 Mate
Desktop - CPU : Ryzen 3 -5600x@3,7Ghz - RAM 16 Go - CM: X570 AORUS PRO( Xfce Testing)
CG : GeForce GTX 970- Nvidia v525 Audio: Starship/Matisse Audio Manjaro 21.1 Xfce Eth: Intel I211 Gigabit
#3Messageil y a 2 ansBonjour Stephane, voici ce que j'obtiens avec cette commande.
$ inxi -Fza
System:
Kernel: 5.15.28-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 11.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.15-x86_64
root=UUID=47213160-4ccf-4d74-9d8a-87092643bbb4 rw quiet apparmor=1
security=apparmor udev.log_priority=3
Desktop: Xfce v: 4.16.0 tk: Gtk v: 3.24.29 info: xfce4-panel wm: xfwm
v: 4.16.1 vt: 7 dm: LightDM v: 1.30.0 Distro: Manjaro Linux
base: Arch Linux
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: TUF GAMING B550M-E WIFI v: Rev X.0x
serial: <superuser required> UEFI: American Megatrends v: 2007
date: 03/22/2021
Battery:
Device-1: hidpp_battery_0 model: Logitech M720 Triathlon Multi-Device Mouse
serial: <filter> charge: 100% (should be ignored) rechargeable: yes
status: discharging
Device-2: hidpp_battery_1 model: Logitech MX Keys Wireless Keyboard
serial: <filter> charge: 100% (should be ignored) rechargeable: yes
status: full
CPU:
Info: model: AMD Ryzen 5 5600X bits: 64 type: MT MCP arch: Zen 3
family: 0x19 (25) model-id: 0x21 (33) stepping: 2 microcode: N/A
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB
L3: 32 MiB desc: 1x32 MiB
Speed (MHz): avg: 2471 high: 2873 min/max: 2200/4650 boost: enabled
scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 2191 2: 2191
3: 2195 4: 2182 5: 2647 6: 2390 7: 2234 8: 2836 9: 2873 10: 2861 11: 2348
12: 2710 bogomips: 88668
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
STIBP: always-on, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Navi 23 [Radeon RX 6600/6600 XT/6600M] vendor: Micro-Star MSI
driver: amdgpu v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16 ports:
active: HDMI-A-1 empty: DP-1,DP-2,DP-3 bus-ID: 0d:00.0 chip-ID: 1002:73ff
class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.3 compositor: xfwm v: 4.16.1 driver:
X: loaded: amdgpu unloaded: modesetting,radeon alternate: fbdev,vesa
gpu: amdgpu display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
s-diag: 582mm (22.93")
Monitor-1: HDMI-A-1 mapped: HDMI-A-0 model: Philips PHL 273V7
serial: <filter> built: 2020 res: 1920x1080 hz: 60 dpi: 82 gamma: 1.2
size: 598x336mm (23.54x13.23") diag: 686mm (27") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
Device-1: AMD Navi 21 HDMI Audio [Radeon RX 6800/6800 XT / 6900 XT]
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 0d:00.1 chip-ID: 1002:ab28 class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 0f:00.4 chip-ID: 1022:1487 class-ID: 0403
Device-3: Plantronics RIG 800HD type: USB
driver: plantronics,snd-usb-audio,usbhid bus-ID: 1-2.2:4 chip-ID: 047f:c043
class-ID: 0300
Sound Server-1: ALSA v: k5.15.28-1-MANJARO running: yes
Sound Server-2: JACK v: 1.9.20 running: no
Sound Server-3: PulseAudio v: 15.0 running: yes
Sound Server-4: PipeWire v: 0.3.48 running: yes
Network:
Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 bus-ID: 09:00.0 chip-ID: 8086:2723 class-ID: 0280
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK PRIME B450M-A driver: r8169 v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 0a:00.0 chip-ID: 10ec:8168
class-ID: 0200
IF: enp10s0 state: down mac: <filter>
IF-ID-1: enp15s0f3u2u1u1 state: unknown speed: -1 duplex: half
mac: <filter>
Drives:
Local Storage: total: 1.83 TiB used: 14.62 GiB (0.8%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 980 1TB
size: 931.51 GiB block-size: physical: 512 B logical: 512 B
speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: 2B4QFXO7
temp: 27.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:3 vendor: Crucial model: CT1000P2SSD8
size: 931.51 GiB block-size: physical: 512 B logical: 512 B
speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: P2CR033
temp: 26.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 type: USB model: N/A size: 14.65 GiB
block-size: physical: 512 B logical: 512 B type: N/A serial: <filter>
rev: 2.00 scheme: MBR
Partition:
ID-1: / raw-size: 931.22 GiB size: 915.53 GiB (98.32%)
used: 14.61 GiB (1.6%) fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 288 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: N/A mobo: N/A gpu: amdgpu temp: 29.0 C
mem: 28.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 0
Info:
Processes: 363 Uptime: 3m wakeups: 4 Memory: 31.3 GiB used: 2.51 GiB (8.0%)
Init: systemd v: 250 tool: systemctl Compilers: gcc: 11.2.0 clang: 13.0.1
Packages: pacman: 1119 lib: 319 flatpak: 0 Shell: Bash v: 5.1.16
running-in: xfce4-terminal inxi: 3.3.14
Et $ iwconfig
lo no wireless extensions.
enp10s0 no wireless extensions.
enp15s0f3u2u1u1 no wireless extensions.
#4Messageil y a 2 ansenp10s0 doit être le réseau fixe ,
par contre cet identifiant enp15s0f3u2u1u1 est incorrect
tu vas d'abord vérifier
1 - mise à jour UEFI , si certaines corrigent un souci de wifi
2 - ajouter dans /etc/default/grub ,
a la ligne
GRUB_CMDLINE_LINUX_DEFAULT=
"amd_iommu=on iommu=pt processor.max_cstate=5 rcu_nocbs=0_11 systemd.unified_cgroup_hierarchy=true scsi_mod.use_blk_mq=1"
sudo nano /etc/default/grub ( Ctrl + X et 'O'ui pour sauver )
sudo update-grub
3- voir dans la log que retourne
sudo journalctl -b0 -g 'iwlwifi'
4 - ajouter les headers et microcode
sudo pacman -S linux515-headers amd-ucode
sudo mkinitcpio -P
sudo update-grub
Macpro quad 2008 - Ati5770 - Xeon 2,8Ghz 8Go Os X 10.6.8 - Linux - Manjaro 22.0 Mate
Desktop - CPU : Ryzen 3 -5600x@3,7Ghz - RAM 16 Go - CM: X570 AORUS PRO( Xfce Testing)
CG : GeForce GTX 970- Nvidia v525 Audio: Starship/Matisse Audio Manjaro 21.1 Xfce Eth: Intel I211 Gigabit
Dernière modification par
stephaneil y a 2 ans, modifié au total 1 fois.
#5Messageil y a 2 ansstephane a écrit : ↑il y a 2 ans
enp10s0 doit être le réseau fixe ,
par contre cet identifiant enp15s0f3u2u1u1 est incorrect
tu vas d'abord vérifier
1 - mise à jour UEFI , si certaines corrigent un souci de wifi
2 - ajouter dans /etc/default/grub ,
a la ligne
GRUB_CMDLINE_LINUX_DEFAULT=
"amd_iommu=on iommu=pt processor.max_cstate=5 rcu_nocbs=0_11 systemd.unified_cgroup_hierarchy=true scsi_mod.use_blk_mq=1"
sudo nano /etc/default/grub ( Ctrl + X et 'O'ui pour sauver )
sudo update-grub
3- voir dans la log que retourne
sudo journalctl -b0 -g 'ilwifi'
4 - ajouter les headers et microcode
sudo pacman -S linux515-headers amd-ucode
sudo mkinitcpio -P
sudo update-grub
A la ligne GRUB_CMDLINE_LINUX_DEFAULT=
j'ai deja:
"quiet apparmor=1 security=apparmor udev.log_priority=3"
Je dois ajouter juste après ou remplacer par :
"amd_iommu=on iommu=pt processor.max_cstate=5 rcu_nocbs=0_11 systemd.unified_cgroup_hierarchy=true scsi_mod.use_blk_mq=1"
Désolé si c'est évident mais j'ai un peu peur de faire une boulette #6Messageil y a 2 ansoui tu dois ajouter , en frappe kilométrique , séparé par un blanc Macpro quad 2008 - Ati5770 - Xeon 2,8Ghz 8Go Os X 10.6.8 - Linux - Manjaro 22.0 Mate
Desktop - CPU : Ryzen 3 -5600x@3,7Ghz - RAM 16 Go - CM: X570 AORUS PRO( Xfce Testing)
CG : GeForce GTX 970- Nvidia v525 Audio: Starship/Matisse Audio Manjaro 21.1 Xfce Eth: Intel I211 Gigabit
#7Messageil y a 2 ansPas d'évolution du coup...
Je comprends vraiment pas ce qu'il se passe.
Par contre cet identifiant enp15s0f3u2u1u1 correspond à mon partage de connexion via USB.
Si je débranche mon téléphone et que je refais un iwconfig, la ligne " enp15s0f3u2u1u1 no wireless extensions." disparait. #8Messageil y a 2 ansbonjour , ok ce point est éclairci
donc le souci concerne intel wifi AX200
regarde bien pour le driver iwlwifi
sudo journalctl -b0 -g iwlfiwi
Macpro quad 2008 - Ati5770 - Xeon 2,8Ghz 8Go Os X 10.6.8 - Linux - Manjaro 22.0 Mate
Desktop - CPU : Ryzen 3 -5600x@3,7Ghz - RAM 16 Go - CM: X570 AORUS PRO( Xfce Testing)
CG : GeForce GTX 970- Nvidia v525 Audio: Starship/Matisse Audio Manjaro 21.1 Xfce Eth: Intel I211 Gigabit
#9Messageil y a 2 ansSalut, du coup j'ai trouvé l'origine du problème, j'ai réinstallé windows 11 et là j'ai retrouvé le wifi sur linux.
Dès que j'ai fait la mise à jour sur windows, rebelotte j'ai perdu le wifi.
Je voulais isoler la mise à jour en question mais en fouillant j'ai trouvé les mises à jour facultatives qui ne sont plus sur la même page que les mises à jour comme sur windows 10 et il y en avait une qui concerne realtek, je l'ai donc faite et ca corrige le problème, donc ca explique pas comment windows arrive a faire partir ma connexion en sucette sur manjaro ni commment solutionner le soucis sur linux mais j'ai une connexion maintenant.
ps: Je n'arrive pas à passer le sujet en résolu.