Problèmes et questions sur les environnements graphiques et les applications.
Répondre

installation de snap

#1Messageil y a 3 ans

Bonjour
Je souhaite installer une application snap mais j'ai le message :

sudo: snap : commande introuvable
Je fais alors

sudo pacman -S snapd
mais j'ai comme retour :

(1/1) analyse des conflits entre fichiers                                                                        [###################################################################] 100%
erreur : la validation de la transaction a échoué (conflit de fichiers)
snapd : /snap est déjà présent dans le système de fichiers
Des erreurs se sont produites, aucun paquet n’a été mis à jour.
Je ne comprends pas comment snap peut-être présent et absent en même temps...
Si quelqu'un a une idée...
Merci d'avance !
Dernière modification par nicoservail y a 3 ans, modifié au total 1 fois.

installation de snap

#2Messageil y a 3 ans

bonjour

peux tu nous fourniir

inxi -Fza 
le gestionnaire de snap est déjà présent

installation de snap

#3Messageil y a 3 ans

Ça me donne ça

System:    Kernel: 5.11.6-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0 
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.11-x86_64 root=UUID=f2dae5ba-a504-41e4-a393-e21b7f00bd67 rw quiet 
           resume=UUID=039b3807-94a9-41ab-9713-5448318c06ec 
           Desktop: KDE Plasma 5.21.3 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM Distro: Manjaro Linux base: Arch Linux 
Machine:   Type: Desktop System: MSI product: MS-7816 v: 1.0 serial: <filter> 
           Mobo: MSI model: Z87-G43 (MS-7816) v: 1.0 serial: <filter> BIOS: American Megatrends v: 1.6 date: 11/27/2013 
Battery:   Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard K230 serial: <filter> charge: 55% (should be ignored) 
           rechargeable: yes status: Discharging 
           Device-2: hidpp_battery_1 model: Logitech M510 serial: <filter> charge: 55% (should be ignored) rechargeable: yes 
           status: Discharging 
           Device-3: sony_controller_battery_07:75:85:49:63:25 model: N/A serial: N/A charge: N/A status: Full 
CPU:       Info: Quad Core model: Intel Core i5-4670K bits: 64 type: MCP arch: Haswell family: 6 model-id: 3C (60) stepping: 3 
           microcode: 28 cache: L2: 6 MiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 27210 
           Speed: 3021 MHz min/max: 800/4000 MHz Core speeds (MHz): 1: 3021 2: 3843 3: 981 4: 810 
           Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
           Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled 
           Type: mds mitigation: Clear CPU buffers; SMT disabled 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, STIBP: disabled, RSB filling 
           Type: srbds mitigation: Microcode 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics vendor: Micro-Star MSI driver: i915 
           v: kernel bus-ID: 00:02.0 chip-ID: 8086:0412 class-ID: 0300 
           Display: x11 server: X.Org 1.20.10 compositor: kwin_x11 driver: loaded: intel unloaded: modesetting 
           alternate: fbdev,vesa display-ID: :0 screens: 1 
           Screen-1: 0 s-res: 5760x1092 s-dpi: 96 s-size: 1520x288mm (59.8x11.3") s-diag: 1547mm (60.9") 
           Monitor-1: HDMI1 res: 1920x1080 hz: 60 dpi: 102 size: 480x270mm (18.9x10.6") diag: 551mm (21.7") 
           Monitor-2: HDMI2 res: 1920x1080 dpi: 81 size: 600x340mm (23.6x13.4") diag: 690mm (27.2") 
           Monitor-3: VGA1 res: 1920x1080 hz: 60 dpi: 102 size: 480x270mm (18.9x10.6") diag: 551mm (21.7") 
           OpenGL: renderer: Mesa DRI Intel HD Graphics 4600 (HSW GT2) v: 4.5 Mesa 20.3.4 compat-v: 3.0 direct render: Yes 
Audio:     Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio vendor: Micro-Star MSI driver: snd_hda_intel 
           v: kernel bus-ID: 00:03.0 chip-ID: 8086:0c0c class-ID: 0403 
           Device-2: Creative Labs Sound Core3D [Sound Blaster Recon3D / Z-Series] driver: snd_hda_intel v: kernel 
           bus-ID: 01:00.0 chip-ID: 1102:0012 class-ID: 0403 
           Device-3: SAVITECH Audiophonics U-SABRE(A) type: USB driver: hid-generic,snd-usb-audio,usbhid bus-ID: 3-3:2 
           chip-ID: 262a:12c0 class-ID: 0102 
           Sound Server-1: ALSA v: k5.11.6-1-MANJARO running: yes 
           Sound Server-2: sndio v: N/A running: no 
           Sound Server-3: JACK v: 0.125.0 running: no 
           Sound Server-4: PulseAudio v: 14.2 running: yes 
           Sound Server-5: PipeWire v: 0.3.23 running: no 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Micro-Star MSI driver: r8168 
           v: 8.048.03-NAPI modules: r8169 port: e000 bus-ID: 02:00.0 chip-ID: 10ec:8168 class-ID: 0200 
           IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: <filter> 
           Device-2: TP-Link Archer T1U 802.11a/n/ac Wireless Adapter [MediaTek MT7610U] type: USB driver: mt76x0u 
           bus-ID: 3-6:4 chip-ID: 2357:0105 class-ID: 0000 serial: <filter> 
           IF: wlp0s20u6 state: down mac: <filter> 
           IF-ID-1: docker0 state: down mac: <filter> 
Bluetooth: Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB driver: btusb v: 0.8 bus-ID: 3-4.2:7 
           chip-ID: 0a12:0001 class-ID: e001 
           Report: ID: hci0 state: up address: <filter> 
Drives:    Local Storage: total: 11.93 TiB used: 8.8 TiB (73.7%) 
           SMART Message: Unable to run smartctl. Root privileges required. 
           ID-1: /dev/sda maj-min: 8:0 vendor: SanDisk model: SDSSDXP120G size: 111.79 GiB block-size: physical: 512 B 
           logical: 512 B speed: 6.0 Gb/s rotation: SSD serial: <filter> rev: 1 scheme: MBR 
           ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital model: WD30EZRX-00D8PB0 size: 2.73 TiB block-size: 
           physical: 4096 B logical: 512 B speed: 6.0 Gb/s rotation: 5400 rpm serial: <filter> rev: 0A80 scheme: GPT 
           ID-3: /dev/sdc maj-min: 8:32 vendor: Western Digital model: WD30EZRX-00D8PB0 size: 2.73 TiB block-size: 
           physical: 4096 B logical: 512 B speed: 6.0 Gb/s rotation: 5400 rpm serial: <filter> rev: 0A80 scheme: GPT 
           ID-4: /dev/sdd maj-min: 8:48 vendor: Western Digital model: WD40EZRX-22SPEB0 size: 3.64 TiB block-size: 
           physical: 4096 B logical: 512 B speed: 6.0 Gb/s rotation: 5400 rpm serial: <filter> rev: 0A80 scheme: GPT 
           ID-5: /dev/sde maj-min: 8:64 vendor: Seagate model: ST3000DM008-2DM166 size: 2.73 TiB block-size: physical: 4096 B 
           logical: 512 B speed: 6.0 Gb/s rotation: 7200 rpm serial: <filter> rev: CC26 scheme: GPT 
Partition: ID-1: / raw-size: 111.79 GiB size: 109.53 GiB (97.98%) used: 54.59 GiB (49.8%) fs: ext4 dev: /dev/sda1 maj-min: 8:1 
           ID-2: /home raw-size: 931.87 GiB size: 916.25 GiB (98.32%) used: 724.99 GiB (79.1%) fs: ext4 dev: /dev/sde1 
           maj-min: 8:65 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: partition size: 14.9 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sdb1 maj-min: 8:17 
Sensors:   System Temperatures: cpu: 29.8 C mobo: 27.8 C 
           Fan Speeds (RPM): N/A 
Info:      Processes: 237 Uptime: 4m wakeups: 5 Memory: 15.51 GiB used: 2.99 GiB (19.3%) Init: systemd v: 247 tool: systemctl 
           Compilers: gcc: 10.2.0 clang: 11.1.0 Packages: 2470 pacman: 2444 lib: 510 flatpak: 26 Shell: Bash v: 5.1.0 
           running-in: yakuake inxi: 3.3.03 

installation de snap

#4Messageil y a 3 ans

tu n'as pas snapd
il faut de plus installer apparmor , l'activer
et ensuite mettre le service snapd

sudo pacman -Syu apparmor flatpak bauh snapd

sudo systemctl enable --now apparmor snapd.apparmor snapd
il faut aussi ajouter pour le démarrage au boot kernel
apparmor=1 security=apparmor

installation de snap

#5Messageil y a 3 ans

Merci pour la réponse !
Je teste ça dès que je peux (là, je suis au boulot...)
Et où faut-il rajouter la dernière ligne ?
Encore un grand merci !

installation de snap

#6Messageil y a 3 ans

il faut ajouter dans /etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT=
apparmor=1 security=apparmor

et mettre jour

sudo update-grub
Dernière modification par stephaneil y a 3 ans, modifié au total 1 fois.

installation de snap

#7Messageil y a 3 ans

Bonsoir
Ben, ça ne marche toujours pas...

erreur : la validation de la transaction a échoué (conflit de fichiers)
snapd : /snap est déjà présent dans le système de fichiers
Des erreurs se sont produites, aucun paquet n’a été mis à jour.
et si j'essaie

sudo systemctl enable --now apparmor snapd.apparmor snapd
ça me retourne

Failed to enable unit: Unit file snapd.apparmor.service does not exist.
Merci en tous cas pour l'aide !

installation de snap

#8Messageil y a 3 ans

Sur le fichier grub qui est à éditer et à sauvegarder voilà ce que j'ai ajouté


Image

installation de snap

#9Messageil y a 3 ans

tu retente alors

sudo pacman -Syu apparmor 
sudo systemctl enable --now apparmor snapd.apparmor snapd

installation de snap

#10Messageil y a 3 ans

Bonjour et merci pour les recherches !
J'ai ajouté la ligne dans grub, rebooté et j'ai toujours l'erreur :

Failed to enable unit: Unit file snapd.apparmor.service does not exist.
Si j'essaie

sudo pacman -Syu snapd
ça me donne :

snapd : /snap est déjà présent dans le système de fichiers
et si j'essaie

sudo pacman -R snapd
ça me donne :

erreur : impossible de trouver la cible : snapd
:tetu!:saispas:

installation de snap

#12Messageil y a 3 ans

Bonjour,
Stéphane t'a demandé de lancer :

sudo pacman -Syu apparmor
Mais dans ta réponse tu lance :

sudo pacman -Syu snapd
As-tu essayé l'installation de apparmor ?

installation de snap

#13Messageil y a 3 ans

Bonjour
Oui, j'ai essayé

sudo pacman -Syu apparmor
puis

 sudo systemctl enable --now apparmor snapd.apparmor snapd
Et ça me donne toujours

Failed to enable unit: Unit file snapd.apparmor.service does not exist.
Et

sudo pacman -Syu snapd
donne toujours

snapd : /snap est déjà présent dans le système de fichiers
...

installation de snap

#14Messageil y a 3 ans

il faut ajouter dans /etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT=
apparmor=1 security=apparmor

et mettre jour

sudo update-grub
Dernière modification par stephaneil y a 3 ans, modifié au total 1 fois.

installation de snap

#15Messageil y a 3 ans

Bonjour
C'est fait aussi.
Voici le contenu de mon /etc/default/grub

GRUB_DEFAULT=saved
GRUB_TIMEOUT=5
GRUB_TIMEOUT_STYLE=menu
GRUB_DISTRIBUTOR='Manjaro'
GRUB_CMDLINE_LINUX_DEFAULT="quiet resume=UUID=039b3807-94a9-41ab-9713-5448318c06ec apparmor=1 security=apparmor udev.log_priority=3"
GRUB_CMDLINE_LINUX=""

# If you want to enable the save default function, uncomment the following
# line, and set GRUB_DEFAULT to saved.
GRUB_SAVEDEFAULT=true

# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"

# Uncomment to enable booting from LUKS encrypted devices
#GRUB_ENABLE_CRYPTODISK=y

# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console

# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto

# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep

# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true

# Uncomment and set to the desired menu colors.  Used by normal and wallpaper
# modes only.  Entries specified as foreground/background.
GRUB_COLOR_NORMAL="light-gray/black"
GRUB_COLOR_HIGHLIGHT="green/black"

# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/usr/share/grub/background.png"
GRUB_THEME="/usr/share/grub/themes/manjaro/theme.txt"

# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"

# Uncomment this option to enable os-prober execution in the grub-mkconfig command
GRUB_DISABLE_OS_PROBER=false

installation de snap

#16Messageil y a 3 ans

Vérifie déjà le status

systemctl status apparmor
Voilà un retour correct

yvance@yvance ~]$ systemctl status apparmor
● apparmor.service - Load AppArmor profiles
     Loaded: loaded (/usr/lib/systemd/system/apparmor.service; enabled; vendor preset: di>
     Active: active (exited) since Sat 2021-04-03 11:19:22 +11; 5 days ago
   Main PID: 401 (code=exited, status=0/SUCCESS)
      Tasks: 0 (limit: 14301)
     Memory: 0B
     CGroup: /system.slice/apparmor.service

avril 03 11:19:22 yvance systemd[1]: Starting Load AppArmor profiles...
avril 03 11:19:22 yvance apparmor.systemd[401]: Restarting AppArmor
avril 03 11:19:22 yvance apparmor.systemd[401]: Reloading AppArmor profiles
avril 03 11:19:22 yvance systemd[1]: Finished Load AppArmor profiles.
lines 1-12/12 (END)

installation de snap

#17Messageil y a 3 ans

nicoserva a écrit : il y a 3 ans Bonjour
Je souhaite installer une application snap(...)
- Quelle application ?

- J'exclus totalement snap de mes ordis, mais pour tout paquet hors dépôts et AUR j'utilise bauh pour l'installation et la gestion : flatpak, appimage, web (pwa) et... (mais donc pas chez moi) snap

installation de snap

#18Messageil y a 3 ans

Bonjour
Le retour de

systemctl status apparmor
me donne

● apparmor.service - Load AppArmor profiles
     Loaded: loaded (/usr/lib/systemd/system/apparmor.service; disabled; vendor preset: disabled)
     Active: inactive (dead)
Et je souhaite installer un jeu :https://snapcraft.io/tmnationsforever
Je regarde bauh que je ne connaissais pas.
Merci pour toutes ces contributions !

installation de snap

#19Messageil y a 3 ans

installation de snap

#20Messageil y a 3 ans

Merci, je n'avais pas pensé à Lutris...
Et j'ai cherché pour snap. J'ai trouvé un fichier snap de 0 octet dans le répertoire /. Je l'ai renommé et tout fonctionne maintenant...

Merci à tous pour l'aide apportée !
Merci d'éditer ton premier message et de cocher l'icone verte lorsque ton problème est résolu. Fait pour toi. :biere:
administration/modération
Répondre