Actualités & Annonces de l'équipe de développement et des administrateurs du forum.

[Stable] Mise à jour 25/02/2018 - Kernels, Plasma, Mesa, Systemd, QT5, Navigateurs

#1Messageil y a 6 ans

Bonjour à toutes et à tous :bjr:

Une mise à jour est annoncée, le deuxième message : "problèmes et solutions" est à lire sur le forum inter.
Bienvenue à une autre mise à jour stable de Manjaro. Non seulement nous avons un nouveau plasma pour vous amuser mais aussi nous avons étendu nos noyaux avec la série 4.16.
Cela apporte un nouveau support matériel et beaucoup de nouvelles fonctionnalités. Nous avons également travaillé sur notre pile graphique et mis à jour certains de nos outils.

Nous avons plasma v5.12.2 et QT v5.10.1
Nous avons ajouté en noyau la série 4.16
Nous avons mis à jour mhwd à 0.6.2 et simplifié l'installation du pilote opensource pour nouveau et amdgpu
Nous avons mis à jour Mesa et LibDRM
Nous avons fait des correctifs avec nvidiafbet et linux415
Nous avons mis à jour Systemd
Nous avons ajouté les mises à jour régulières en amont comme Haskell et Python
N'hésitez pas à nous donner vos commentaires sur les modifications apportées aux dépôts.


-------------------------------------------------------------------------------------
Mise à jour possible par pamac, octopi ou par pacman (de préférence) :

sudo pacman-mirrors -f0 && sudo pacman -Syu && yaourt -Syua
-------------------------------------------------------------------------------------


Noyaux pris en charge :
  • linux316 3.16.54
  • linux318 3.18.95 [EOL] En fin de vie
  • linux41 4.1.49
  • linux44 4.4.117
  • linux49 4.9.83
  • linux414 4.14.21
  • linux415 4.15.5
  • linux416 4.16-rc2 (nouveau expérimental)
  • linux-RT-LTS 4.14.20_rt17
  • linux-RT 4.14.20_rt17
Les changements en détail :
  • stable community x86_64: 862 nouveaux et 784 paquets retirés
  • stable core x86_64: 28 nouveaux et 26 paquets retirés
  • stable extra x86_64: 275 nouveaux et 262 paquets retirés
  • stable multilib x86_64: 13 nouveaux et 17 paquets retirés
Tous les détails sur la liste des paquets ici

5 paquets supprimés :

geth psi-plus psi-plus-l10n psi-plus-plugins sagemath-src
88 nouveaux paquets: (linux416, linux-driver-management)

apper:  An application and package manager using PackageKit
caffeine-ng:  Status bar application able to temporarily inhibit the screensaver and sleep mode.
etherwall:  Ethereum GUI Wallet (QT5)
flameshot:  Powerful yet simple to use screenshot software
gnome-shell-extension-appindicator:  Integrates AppIndicators into GNOME Shell.
go-ethereum:  Official golang implementation of the Ethereum protocol
kbfs:  The Keybase filesystem
khal:  CLI calendar application build around CalDAV
kickshaw:  A menu editor for openbox
ldm-gdm-integration:  LDM Integration for GDM
ldm-lightdm-integration:  LDM Integration for LightDM
ldm-sddm-integration:  LDM Integration for SDDM
lib32-libevent:  An event notification library (32-bit)
libmpack:  Simple implementation of msgpack in C
light:  Program to easily change brightness on backlight-controllers.
linux416:  The Linux416 kernel and modules
linux416-acpi_call:  A linux kernel module that enables calls to ACPI methods through /proc/acpi/call
linux416-bbswitch:  kernel module allowing to switch dedicated graphics card on Optimus laptops
linux416-broadcom-wl:  Broadcom 802.11 Linux STA wireless driver BCM43142.
linux416-catalyst:  AMD/ATI Catalyst drivers for linux. fglrx kernel module only.
linux416-headers:  Header files and scripts for building modules for Linux416 kernel
linux416-ndiswrapper:  Module for NDIS (Windows Network Drivers) drivers supplied by vendors.
linux416-nvidia:  NVIDIA drivers for linux.
linux416-nvidia-304xx:  NVIDIA drivers for linux.
linux416-nvidia-340xx:  NVIDIA drivers for linux.
linux416-nvidiabl:  Driver to adjust display backlight on modern mobile NVidia graphics adapters.
linux416-r8168:  A kernel module for Realtek 8168 network cards
linux416-spl:  Solaris Porting Layer kernel modules.
linux416-tp_smapi:  Modules for ThinkPad's SMAPI functionality
linux416-vhba-module:  Kernel module that emulates SCSI devices
linux416-virtualbox-guest-modules:  Guest kernel modules for VirtualBox
linux416-virtualbox-host-modules:  Host kernel modules for VirtualBox
linux416-zfs:  Kernel modules for the Zettabyte File System.
linux-driver-management:  Linux Driver Management (LDM)
lua52-mpack:  Simple implementation of msgpack in C Lua 5.2
lua-mpack:  Simple implementation of msgpack in C Lua 5.3
manjaro-bspwm-mate-settings:  Manjaro Linux bspwm-mate settings
manjaro-bspwm-settings-minimal:  Manjaro Linux minimal bspwm settings
ob-autostart:  A simple autostart application for Openbox
obkey-git:  Openbox Key Editor - converted to PyGObject.
openbox-scripts:  A collection of Openbox scripts and pipemenus
opensnap:  Aero Snap Funcionality In Openbox
perl-statistics-descriptive:  Module of basic descriptive statistical functions.
polybar:  A fast and easy-to-use status bar
psi:  Psi+ is a powerful Jabber client (Qt, C++) designed for the Jabber power users (built with Qt 5.x)
psi-l10n:  Language packs for Psi
psi-nowebkit:  Psi is a powerful Jabber client (Qt, C++) designed for the Jabber power users (without webkit support)
psi-plugins:  Additional plugins for Psi
python2-***
python-***
qtile:  A full-featured, pure-Python tiling window manager.
radicale:  Simple calendar (CalDAV) and contact (CardDAV) server
trayer-srg-git:  trayer fork with multi monitor support, cleaned up codebase and other fancy stuff
ttf-icomoon-icons:  TrueType icomoon font
ttf-material-icons:  Google Material Design icon font
ttf-polybar-icons:  TrueType polybar icons
vdirsyncer:  Synchronize CalDAV and CardDAV.
volnoti:  Lightweight volume and brightness notification for Linux using volnoti
-------------------------------------------------------------------------------------


-------------------------------------------------------------------------------------
ERREUR : conflit de fichiers
Si lors de la mise à jour vous avez le type d'erreur comme ci-dessous (tlp est un exemple) :

erreur : la validation de la transaction a échoué (conflit de fichiers)
tlp : /etc/acpi/events/thinkpad-radiosw est déjà présent dans le système de fichiers
Des erreurs se sont produites, aucun paquet n’a été mis à jour.
il convient de passer la commande suivante en l'adaptant à votre cas particulier :

sudo pacman -S --force tlp
Ensuite, vous pouvez faire votre mise à jour générale sans problème.
-------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------
ERREUR de clés
Si lors de la mise à jour vous avez des problèmes de clés, essayez de passer les commandes suivantes :

sudo pacman-mirrors -f0
sudo pacman -Syy
sudo pacman -S archlinux-keyring manjaro-keyring
sudo pacman-key --init
sudo pacman-key --populate archlinux manjaro
sudo pacman-key --refresh-keys
Ensuite, vous devriez pouvoir faire votre mise à jour générale sans problème.
-------------------------------------------------------------------------------------

[Stable] Mise à jour 25/02/2018 - Kernels, Plasma, Mesa, Systemd, QT5, Navigateurs

#2Messageil y a 6 ans

Bonjour @ tous. :salut:
Si vous avez un problème avec erreur : la validation de la transaction a échoué (conflit de fichiers)
zita-resampler : /usr/lib/libzita-resampler.so.1 est déjà présent dans le système de fichiers
, il faut juste le supprimer:

sudo rm /usr/lib/libzita-resampler.so.1
sudo pacman -Su
C'est un problème qui est même en amont d'Archlinux.
En gros la version 1.6.0-1 déployée uniquement en testing avait un petit défaut qui a été corrigé par l'ajout d'un lien vers cette dépendance. Le problème a été corrigé dans la version 1.6.0-2, mais la présence de ce lien du coup devient bloquant.

Ne concerne donc que les personnes qui sont passées en testing

[Stable] Mise à jour 25/02/2018 - Kernels, Plasma, Mesa, Systemd, QT5, Navigateurs

#3Messageil y a 6 ans

salut
52 paquets sous cinnamon et ras
merci

[Stable] Mise à jour 25/02/2018 - Kernels, Plasma, Mesa, Systemd, QT5, Navigateurs

#4Messageil y a 6 ans

RAS et en stable, pas de souci avec le dit paquet :wink:

[Stable] Mise à jour 25/02/2018 - Kernels, Plasma, Mesa, Systemd, QT5, Navigateurs

#5Messageil y a 6 ans

bonjour
58 paquets sur xfce ras
:salut:

[Stable] Mise à jour 25/02/2018 - Kernels, Plasma, Mesa, Systemd, QT5, Navigateurs

#6Messageil y a 6 ans

bonjour ,
71 paquets mis à jour sur Xfce
*** attention modification pour les drivers nouveau , ati , radeon , nvidia et bumblebee , prime ****

toujours le souci après connexion Xfce
je suis obligé de faire Ctrl+Alt+F2 puis Ctrl+Alt+F7

[Stable] Mise à jour 25/02/2018 - Kernels, Plasma, Mesa, Systemd, QT5, Navigateurs

#7Messageil y a 6 ans

Bonjour.
93 paquets mise à jour sous Xfce (+14 pour AUR). Ras tout semble stable et fonctionnel.

C'est bizarre ton soucis Stéphane :
toujours le souci après connexion Xfce
je suis obligé de faire Ctrl+Alt+F2 puis Ctrl+Alt+F7
Est ce que tu aurais quelque chose au démarrage qui pourrait en être la cause ?

[Stable] Mise à jour 25/02/2018 - Kernels, Plasma, Mesa, Systemd, QT5, Navigateurs

#8Messageil y a 6 ans

Bonjour, Une petite soixantaine de paquets. La suppression de libzita-resampler.so.1 ne devrait donc pas nécessiter une intervention manuelle de l'utilisateur, contrairement à Arch et aux branches testing de Manjaro. C'est-y pas beau ça ? :clap Messieurs les devs et merci à l'annonceur :bien

[Stable] Mise à jour 25/02/2018 - Kernels, Plasma, Mesa, Systemd, QT5, Navigateurs

#9Messageil y a 6 ans

mOOnSlide a écrit : il y a 6 ans Bonjour.
93 paquets mise à jour sous Xfce (+14 pour AUR). Ras tout semble stable et fonctionnel.

C'est bizarre ton soucis Stéphane :
toujours le souci après connexion Xfce
je suis obligé de faire Ctrl+Alt+F2 puis Ctrl+Alt+F7
Est ce que tu aurais quelque chose au démarrage qui pourrait en être la cause ?
juste une option ajouté par nvidia-settings et qui a priori ne passe mal étape de login , depuis la série 390.x ,
sinon les fonctions de bases de rotations sur l'écran ne peuvent s'appliquer

[Stable] Mise à jour 25/02/2018 - Kernels, Plasma, Mesa, Systemd, QT5, Navigateurs

#10Messageil y a 6 ans

stephane a écrit : il y a 6 ans bonjour ,
71 paquets mis à jour sur Xfce
*** attention modification pour les drivers nouveau , ati , radeon , nvidia et bumblebee , prime ****

toujours le souci après connexion Xfce
je suis obligé de faire Ctrl+Alt+F2 puis Ctrl+Alt+F7
Bonjour .
As tu essayé de vider ~/.cache et/ou d'effacer les sessions enregistrées? (session et démarrage)

[Stable] Mise à jour 25/02/2018 - Kernels, Plasma, Mesa, Systemd, QT5, Navigateurs

#11Messageil y a 6 ans

le problème vient des drivers Nvidia en version 390 , la version 387 fonctionne très bien

[Stable] Mise à jour 25/02/2018 - Kernels, Plasma, Mesa, Systemd, QT5, Navigateurs

#12Messageil y a 6 ans

hop la !
395 mo de mise à jour effectuée sans aucun problème ^^ j'ai lancé une mise à jour sur ma grosse tour pour 200mo et j'espère que cela va bien se passer aussi :) très bonne fin de weekend à toutes et tous

edit: aucun problème sur ma tour, cette distribution est vraiment une perle ! je kiffe de plus en plus et un pote de formation s'intéresse à linux ^^ c'est vrai que c'est plaisant d'être sur quelque chose de stable et basé sur le partage !
bref bonheur et merci encore à toute l'équipe

stéphane

[Stable] Mise à jour 25/02/2018 - Kernels, Plasma, Mesa, Systemd, QT5, Navigateurs

#13Messageil y a 6 ans

Bonsoir tout le monde
125 paquets pour KDE et redémarrage au poil :bien
A part Kmail qui fonctionne pour tout sauf pour la synchronisation réception qui ne se fait qu’une fois sur 3 ou 4 :?:
Mais ça dure depuis un petit moment.
Merci aux équipes pour le boulot et l'animation du forum
Michel

[Stable] Mise à jour 25/02/2018 - Kernels, Plasma, Mesa, Systemd, QT5, Navigateurs

#14Messageil y a 6 ans

Bonjour,
63 paquets mis à jour, redécollage sans souci, merci.
Quant nvidia et consort, est-ce normal que ce soit devenu juste "vidro-linux" et plus "bumblebee-intel"
Image

[Stable] Mise à jour 25/02/2018 - Kernels, Plasma, Mesa, Systemd, QT5, Navigateurs

#15Messageil y a 6 ans

[Stable] Mise à jour 25/02/2018 - Kernels, Plasma, Mesa, Systemd, QT5, Navigateurs

#16Messageil y a 6 ans

Hello fassil,
Merci pour ce lien éclairant.
Y a quand même un os quand je veux visionner une vidéo avec VLC-nightly --->>
tout a planté et j'ai dû crasher la session.
En revanche avec "parole" pas de souci.
Bon ça n'a peut-être rien à avoir avec les drivers graphiques...
Sinon tout baigne dans la chantilly, merci encore à tous.

[Stable] Mise à jour 25/02/2018 - Kernels, Plasma, Mesa, Systemd, QT5, Navigateurs

#17Messageil y a 6 ans

[Stable] Mise à jour 25/02/2018 - Kernels, Plasma, Mesa, Systemd, QT5, Navigateurs

#18Messageil y a 6 ans

Salut,

Chez moi gros plantage après redémarrage, je bloque que ce soit en boot normal ou boot fallback.

Version KDE + carte graphique AMD HD 5770, pas de pilotes propriétaires.

Jusque maintenant, toutes les MàJ s'étaient faites sans problèmes, ce fut encore le cas sur celle ci pas de problème de dépendances ou de conflits.

Mais au redémarrage le lendemain, plus d'écran noir pendant le boot, je vois toutes les étapes et en final il reste bloqué sur les deux dernières lignes qui sont :

Starting Terminate Plymouth Boot Screen...
Starting Wait 'for"Plymouth Boot" Screen' to Quit...

Et là, CRTL+ALT+F1 ou F2 ou forcer sur CTRL+ALT+F7 ne sert à rien l'écran clignote, le disque dur travaille un peu mais rien.

Soit je fait un reset sauvage soit je fait CTRL+ALT+SUPPR pour l'éteindre.

Merci pour votre aide.

[Stable] Mise à jour 25/02/2018 - Kernels, Plasma, Mesa, Systemd, QT5, Navigateurs

#19Messageil y a 6 ans

Bonjour,
Après la mise à jour de 105 paquets (1,6 Go) et quelques redémarrages de routine, tout roule. :merci:
Merci !

[Stable] Mise à jour 25/02/2018 - Kernels, Plasma, Mesa, Systemd, QT5, Navigateurs

#20Messageil y a 6 ans

Bonjour,
Suite à derniere mise à jour, je n'ai plus de bureau sur XFCE. Seul le tableau bord est présent. Je peux installer des lanceurs, mais aucune sauvegarde de l'environnement n'est possible.
J' utilise le driver graphique "nouveau".

[    20.741] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[    20.741] X Protocol Version 11, Revision 0
[    20.741] Build Operating System: Linux 4.14.12-1-ARCH x86_64 
[    20.741] Current Operating System: Linux bus-pc 4.14.21-1-MANJARO #1 SMP PREEMPT Fri Feb 23 00:01:40 UTC 2018 x86_64
[    20.741] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14-x86_64 root=UUID=d7ec0a08-e663-46fb-8901-bec8df1d1aba rw quiet resume=UUID=dca84210-7e7e-4634-baa6-ca77039f93d6
[    20.741] Build Date: 26 January 2018  10:25:18AM
[    20.741]  
[    20.741] Current version of pixman: 0.34.0
[    20.741] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    20.741] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    20.741] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 27 14:46:17 2018
[    20.785] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    20.785] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    20.816] (==) No Layout section.  Using the first Screen section.
[    20.816] (==) No screen section available. Using defaults.
[    20.816] (**) |-->Screen "Default Screen Section" (0)
[    20.816] (**) |   |-->Monitor "<default monitor>"
[    20.945] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    20.945] (==) Automatically adding devices
[    20.945] (==) Automatically enabling devices
[    20.945] (==) Automatically adding GPU devices
[    20.945] (==) Automatically binding GPU devices
[    20.945] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    21.044] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    21.044] 	Entry deleted from font path.
[    21.044] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    21.045] 	Entry deleted from font path.
[    21.045] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    21.045] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    21.045] 	Entry deleted from font path.
[    21.045] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    21.045] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[    21.045] (==) ModulePath set to "/usr/lib/xorg/modules"
[    21.045] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    21.045] (II) Loader magic: 0x5631ba083d60
[    21.045] (II) Module ABI versions:
[    21.045] 	X.Org ANSI C Emulation: 0.4
[    21.045] 	X.Org Video Driver: 23.0
[    21.045] 	X.Org XInput driver : 24.1
[    21.045] 	X.Org Server Extension : 10.0
[    21.046] (++) using VT number 7

[    21.046] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    21.047] (II) xfree86: Adding drm device (/dev/dri/card0)
[    21.052] (--) PCI:*(0:2:0:0) 10de:0a20:1043:830f rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
[    21.052] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    21.052] (II) LoadModule: "glx"
[    21.073] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    21.720] (II) Module glx: vendor="X.Org Foundation"
[    21.720] 	compiled for 1.19.6, module version = 1.0.0
[    21.720] 	ABI class: X.Org Server Extension, version 10.0
[    21.720] (==) Matched nouveau as autoconfigured driver 0
[    21.720] (==) Matched nv as autoconfigured driver 1
[    21.720] (==) Matched nouveau as autoconfigured driver 2
[    21.720] (==) Matched nv as autoconfigured driver 3
[    21.720] (==) Matched modesetting as autoconfigured driver 4
[    21.720] (==) Matched fbdev as autoconfigured driver 5
[    21.720] (==) Matched vesa as autoconfigured driver 6
[    21.720] (==) Assigned the driver to the xf86ConfigLayout
[    21.720] (II) LoadModule: "nouveau"
[    21.730] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    22.034] (II) Module nouveau: vendor="X.Org Foundation"
[    22.034] 	compiled for 1.19.3, module version = 1.0.15
[    22.034] 	Module class: X.Org Video Driver
[    22.034] 	ABI class: X.Org Video Driver, version 23.0
[    22.034] (II) LoadModule: "nv"
[    22.034] (WW) Warning, couldn't open module nv
[    22.034] (II) UnloadModule: "nv"
[    22.034] (II) Unloading nv
[    22.034] (EE) Failed to load module "nv" (module does not exist, 0)
[    22.034] (II) LoadModule: "modesetting"
[    22.035] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    22.043] (II) Module modesetting: vendor="X.Org Foundation"
[    22.043] 	compiled for 1.19.6, module version = 1.19.6
[    22.043] 	Module class: X.Org Video Driver
[    22.043] 	ABI class: X.Org Video Driver, version 23.0
[    22.043] (II) LoadModule: "fbdev"
[    22.043] (WW) Warning, couldn't open module fbdev
[    22.043] (II) UnloadModule: "fbdev"
[    22.043] (II) Unloading fbdev
[    22.043] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    22.043] (II) LoadModule: "vesa"
[    22.044] (WW) Warning, couldn't open module vesa
[    22.044] (II) UnloadModule: "vesa"
[    22.044] (II) Unloading vesa
[    22.044] (EE) Failed to load module "vesa" (module does not exist, 0)
[    22.044] (II) NOUVEAU driver 
[    22.044] (II) NOUVEAU driver for NVIDIA chipset families :
[    22.044] 	RIVA TNT        (NV04)
[    22.044] 	RIVA TNT2       (NV05)
[    22.044] 	GeForce 256     (NV10)
[    22.044] 	GeForce 2       (NV11, NV15)
[    22.044] 	GeForce 4MX     (NV17, NV18)
[    22.044] 	GeForce 3       (NV20)
[    22.044] 	GeForce 4Ti     (NV25, NV28)
[    22.044] 	GeForce FX      (NV3x)
[    22.044] 	GeForce 6       (NV4x)
[    22.044] 	GeForce 7       (G7x)
[    22.044] 	GeForce 8       (G8x)
[    22.045] 	GeForce GTX 200 (NVA0)
[    22.045] 	GeForce GTX 400 (NVC0)
[    22.045] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    22.053] (II) [drm] nouveau interface version: 1.3.1
[    22.053] (WW) Falling back to old probe method for modesetting
[    22.053] (II) Loading sub module "dri2"
[    22.053] (II) LoadModule: "dri2"
[    22.053] (II) Module "dri2" already built-in
[    22.053] (--) NOUVEAU(0): Chipset: "NVIDIA NVA5"
[    22.053] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    22.053] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    22.053] (==) NOUVEAU(0): RGB weight 888
[    22.053] (==) NOUVEAU(0): Default visual is TrueColor
[    22.053] (==) NOUVEAU(0): Using HW cursor
[    22.053] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[    22.053] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[    22.054] (==) NOUVEAU(0): Page flipping enabled
[    22.054] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[    22.054] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[    22.054] (II) NOUVEAU(0): Initializing outputs ...
[    22.083] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[    22.094] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    22.095] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[    22.095] (II) NOUVEAU(0): 3 crtcs needed for screen.
[    22.098] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[    22.098] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[    22.127] (II) NOUVEAU(0): EDID for output DVI-I-1
[    22.127] (II) NOUVEAU(0): Manufacturer: IVM  Model: 6602  Serial#: 16843009
[    22.127] (II) NOUVEAU(0): Year: 2011  Week: 3
[    22.127] (II) NOUVEAU(0): EDID Version: 1.3
[    22.127] (II) NOUVEAU(0): Digital Display Input
[    22.127] (II) NOUVEAU(0): DFP 1.x compatible TMDS
[    22.127] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 60  vert.: 34
[    22.127] (II) NOUVEAU(0): Gamma: 2.20
[    22.127] (II) NOUVEAU(0): DPMS capabilities: Off
[    22.128] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    22.128] (II) NOUVEAU(0): First detailed timing is preferred mode
[    22.128] (II) NOUVEAU(0): redX: 0.648 redY: 0.339   greenX: 0.282 greenY: 0.603
[    22.128] (II) NOUVEAU(0): blueX: 0.143 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[    22.128] (II) NOUVEAU(0): Supported established timings:
[    22.128] (II) NOUVEAU(0): 720x400@70Hz
[    22.128] (II) NOUVEAU(0): 640x480@60Hz
[    22.128] (II) NOUVEAU(0): 640x480@67Hz
[    22.128] (II) NOUVEAU(0): 640x480@72Hz
[    22.128] (II) NOUVEAU(0): 640x480@75Hz
[    22.128] (II) NOUVEAU(0): 800x600@56Hz
[    22.128] (II) NOUVEAU(0): 800x600@60Hz
[    22.128] (II) NOUVEAU(0): 800x600@72Hz
[    22.128] (II) NOUVEAU(0): 800x600@75Hz
[    22.128] (II) NOUVEAU(0): 832x624@75Hz
[    22.128] (II) NOUVEAU(0): 1024x768@60Hz
[    22.128] (II) NOUVEAU(0): 1024x768@70Hz
[    22.128] (II) NOUVEAU(0): 1024x768@75Hz
[    22.128] (II) NOUVEAU(0): 1280x1024@75Hz
[    22.128] (II) NOUVEAU(0): 1152x864@75Hz
[    22.128] (II) NOUVEAU(0): Manufacturer's mask: 0
[    22.128] (II) NOUVEAU(0): Supported standard timings:
[    22.128] (II) NOUVEAU(0): #0: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    22.128] (II) NOUVEAU(0): #1: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    22.128] (II) NOUVEAU(0): #2: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    22.128] (II) NOUVEAU(0): #3: hsize: 1280  vsize 1024  refresh: 75  vid: 36737
[    22.128] (II) NOUVEAU(0): #4: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    22.128] (II) NOUVEAU(0): #5: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[    22.128] (II) NOUVEAU(0): #6: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    22.128] (II) NOUVEAU(0): #7: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    22.128] (II) NOUVEAU(0): Supported detailed timing:
[    22.128] (II) NOUVEAU(0): clock: 148.5 MHz   Image Size:  598 x 336 mm
[    22.128] (II) NOUVEAU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    22.128] (II) NOUVEAU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    22.128] (II) NOUVEAU(0): Serial No: 1105110303304
[    22.128] (II) NOUVEAU(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[    22.128] (II) NOUVEAU(0): Monitor name: PLB2712HDS
[    22.128] (II) NOUVEAU(0): EDID (in hex):
[    22.128] (II) NOUVEAU(0): 	00ffffffffffff0026cd026601010101
[    22.128] (II) NOUVEAU(0): 	03150103813c22782a3585a656489a24
[    22.128] (II) NOUVEAU(0): 	125054bfef80b300a9409500818f8180
[    22.128] (II) NOUVEAU(0): 	950f714f81c0023a801871382d40582c
[    22.128] (II) NOUVEAU(0): 	450056502100001e000000ff00313130
[    22.128] (II) NOUVEAU(0): 	35313130333033333034000000fd0037
[    22.128] (II) NOUVEAU(0): 	4c1e5111000a202020202020000000fc
[    22.129] (II) NOUVEAU(0): 	00504c42323731324844530a202000cd
[    22.129] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[    22.129] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    22.129] (II) NOUVEAU(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    22.129] (II) NOUVEAU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    22.129] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    22.129] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    22.129] (II) NOUVEAU(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    22.129] (II) NOUVEAU(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    22.129] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    22.129] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    22.129] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    22.129] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    22.129] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    22.129] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    22.129] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    22.129] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    22.129] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    22.129] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    22.129] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    22.129] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    22.129] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    22.129] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    22.129] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    22.140] (II) NOUVEAU(0): EDID for output VGA-1
[    22.141] (II) NOUVEAU(0): EDID for output HDMI-1
[    22.141] (II) NOUVEAU(0): Output DVI-I-1 connected
[    22.141] (II) NOUVEAU(0): Output VGA-1 disconnected
[    22.141] (II) NOUVEAU(0): Output HDMI-1 disconnected
[    22.141] (II) NOUVEAU(0): Using exact sizes for initial modes
[    22.141] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080 +0+0
[    22.141] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
[    22.141] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[    22.141] (**) NOUVEAU(0):  Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[    22.141] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    22.141] (**) NOUVEAU(0):  Driver mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
[    22.141] (II) NOUVEAU(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    22.141] (**) NOUVEAU(0):  Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[    22.141] (II) NOUVEAU(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    22.141] (**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[    22.141] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    22.141] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[    22.141] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    22.141] (**) NOUVEAU(0):  Driver mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
[    22.141] (II) NOUVEAU(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    22.141] (**) NOUVEAU(0):  Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
[    22.141] (II) NOUVEAU(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    22.141] (**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[    22.141] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    22.141] (**) NOUVEAU(0):  Driver mode "1280x720": 74.2 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz
[    22.141] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    22.141] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
[    22.141] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    22.141] (**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[    22.141] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    22.141] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    22.141] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    22.141] (**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[    22.141] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    22.141] (**) NOUVEAU(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[    22.141] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    22.141] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[    22.141] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    22.141] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    22.141] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    22.141] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    22.141] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    22.141] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[    22.141] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    22.141] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[    22.141] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    22.141] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[    22.141] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    22.141] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[    22.141] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    22.141] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[    22.141] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    22.141] (==) NOUVEAU(0): DPI set to (96, 96)
[    22.141] (II) Loading sub module "fb"
[    22.141] (II) LoadModule: "fb"
[    22.141] (II) Loading /usr/lib/xorg/modules/libfb.so
[    22.152] (II) Module fb: vendor="X.Org Foundation"
[    22.152] 	compiled for 1.19.6, module version = 1.0.0
[    22.152] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    22.152] (II) Loading sub module "shadowfb"
[    22.152] (II) LoadModule: "shadowfb"
[    22.152] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    22.156] (II) Module shadowfb: vendor="X.Org Foundation"
[    22.157] 	compiled for 1.19.6, module version = 1.0.0
[    22.157] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    22.157] (II) UnloadModule: "modesetting"
[    22.157] (II) Unloading modesetting
[    22.157] (--) Depth 24 pixmap format is 32 bpp
[    22.165] (II) NOUVEAU(0): Channel setup complete.
[    22.172] (II) NOUVEAU(0): [COPY] async initialised.
[    22.200] (II) NOUVEAU(0): Hardware support for Present enabled
[    22.200] (II) NOUVEAU(0): [DRI2] Setup complete
[    22.200] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    22.200] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    22.200] (II) Loading sub module "exa"
[    22.200] (II) LoadModule: "exa"
[    22.200] (II) Loading /usr/lib/xorg/modules/libexa.so
[    22.215] (II) Module exa: vendor="X.Org Foundation"
[    22.215] 	compiled for 1.19.6, module version = 2.6.0
[    22.215] 	ABI class: X.Org Video Driver, version 23.0
[    22.215] (II) EXA(0): Driver allocated offscreen pixmaps
[    22.215] (II) EXA(0): Driver registered support for the following operations:
[    22.215] (II)         Solid
[    22.215] (II)         Copy
[    22.215] (II)         Composite (RENDER acceleration)
[    22.215] (II)         UploadToScreen
[    22.215] (II)         DownloadFromScreen
[    22.215] (==) NOUVEAU(0): Backing store enabled
[    22.215] (==) NOUVEAU(0): Silken mouse enabled
[    22.215] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    22.215] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    22.215] (==) NOUVEAU(0): DPMS enabled
[    22.215] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    22.217] (--) RandR disabled
[    26.302] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    26.302] (II) AIGLX: enabled GLX_ARB_create_context
[    26.302] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    26.302] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    26.302] (II) AIGLX: enabled GLX_INTEL_swap_event
[    26.302] (II) AIGLX: enabled GLX_SGI_swap_control
[    26.303] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    26.303] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    26.303] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    26.303] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    26.309] (II) AIGLX: Loaded and initialized nouveau
[    26.309] (II) GLX: Initialized DRI2 GL provider for screen 0
[    26.312] (II) NOUVEAU(0): NVEnterVT is called.
[    26.317] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[    26.317] resize called 1920 1080
[    26.834] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    26.834] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.834] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    26.834] (**) Power Button: Applying InputClass "system-keyboard"
[    26.835] (II) LoadModule: "libinput"
[    26.835] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    26.929] (II) Module libinput: vendor="X.Org Foundation"
[    26.929] 	compiled for 1.19.3, module version = 0.26.0
[    26.929] 	Module class: X.Org XInput Driver
[    26.929] 	ABI class: X.Org XInput driver, version 24.1
[    26.929] (II) Using input driver 'libinput' for 'Power Button'
[    26.929] (**) Power Button: always reports core events
[    26.929] (**) Option "Device" "/dev/input/event4"
[    26.929] (**) Option "_source" "server/udev"
[    26.930] (II) event4  - Power Button: is tagged by udev as: Keyboard
[    26.931] (II) event4  - Power Button: device is a keyboard
[    26.931] (II) event4  - Power Button: device removed
[    26.953] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event4"
[    26.953] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    26.953] (**) Option "xkb_model" "pc105"
[    26.953] (**) Option "xkb_layout" "fr"
[    27.087] (II) event4  - Power Button: is tagged by udev as: Keyboard
[    27.087] (II) event4  - Power Button: device is a keyboard
[    27.088] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    27.088] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    27.088] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    27.088] (**) Power Button: Applying InputClass "system-keyboard"
[    27.088] (II) Using input driver 'libinput' for 'Power Button'
[    27.088] (**) Power Button: always reports core events
[    27.088] (**) Option "Device" "/dev/input/event3"
[    27.088] (**) Option "_source" "server/udev"
[    27.089] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    27.089] (II) event3  - Power Button: device is a keyboard
[    27.089] (II) event3  - Power Button: device removed
[    27.106] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event3"
[    27.106] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    27.106] (**) Option "xkb_model" "pc105"
[    27.106] (**) Option "xkb_layout" "fr"
[    27.107] (II) event3  - Power Button: is tagged by udev as: Keyboard
[    27.107] (II) event3  - Power Button: device is a keyboard
[    27.108] (II) config/udev: Adding input device Microsoft Comfort Curve Keyboard 3000 (/dev/input/event0)
[    27.108] (**) Microsoft Comfort Curve Keyboard 3000: Applying InputClass "evdev keyboard catchall"
[    27.108] (**) Microsoft Comfort Curve Keyboard 3000: Applying InputClass "libinput keyboard catchall"
[    27.108] (**) Microsoft Comfort Curve Keyboard 3000: Applying InputClass "system-keyboard"
[    27.108] (II) Using input driver 'libinput' for 'Microsoft Comfort Curve Keyboard 3000'
[    27.108] (**) Microsoft Comfort Curve Keyboard 3000: always reports core events
[    27.108] (**) Option "Device" "/dev/input/event0"
[    27.108] (**) Option "_source" "server/udev"
[    27.109] (II) event0  - Microsoft Comfort Curve Keyboard 3000: is tagged by udev as: Keyboard
[    27.109] (II) event0  - Microsoft Comfort Curve Keyboard 3000: device is a keyboard
[    27.109] (II) event0  - Microsoft Comfort Curve Keyboard 3000: device removed
[    27.140] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/0003:045E:0780.0001/input/input2/event0"
[    27.140] (II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 3000" (type: KEYBOARD, id 8)
[    27.140] (**) Option "xkb_model" "pc105"
[    27.140] (**) Option "xkb_layout" "fr"
[    27.142] (II) event0  - Microsoft Comfort Curve Keyboard 3000: is tagged by udev as: Keyboard
[    27.142] (II) event0  - Microsoft Comfort Curve Keyboard 3000: device is a keyboard
[    27.144] (II) config/udev: Adding input device Microsoft Comfort Curve Keyboard 3000 (/dev/input/event1)
[    27.144] (**) Microsoft Comfort Curve Keyboard 3000: Applying InputClass "evdev keyboard catchall"
[    27.144] (**) Microsoft Comfort Curve Keyboard 3000: Applying InputClass "libinput keyboard catchall"
[    27.144] (**) Microsoft Comfort Curve Keyboard 3000: Applying InputClass "system-keyboard"
[    27.144] (II) Using input driver 'libinput' for 'Microsoft Comfort Curve Keyboard 3000'
[    27.144] (**) Microsoft Comfort Curve Keyboard 3000: always reports core events
[    27.144] (**) Option "Device" "/dev/input/event1"
[    27.144] (**) Option "_source" "server/udev"
[    27.145] (II) event1  - Microsoft Comfort Curve Keyboard 3000: is tagged by udev as: Keyboard
[    27.145] (II) event1  - Microsoft Comfort Curve Keyboard 3000: device is a keyboard
[    27.145] (II) event1  - Microsoft Comfort Curve Keyboard 3000: device removed
[    27.170] (II) libinput: Microsoft Comfort Curve Keyboard 3000: needs a virtual subdevice
[    27.170] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/0003:045E:0780.0002/input/input3/event1"
[    27.170] (II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 3000" (type: MOUSE, id 9)
[    27.170] (**) Option "AccelerationScheme" "none"
[    27.170] (**) Microsoft Comfort Curve Keyboard 3000: (accel) selected scheme none/0
[    27.170] (**) Microsoft Comfort Curve Keyboard 3000: (accel) acceleration factor: 2.000
[    27.170] (**) Microsoft Comfort Curve Keyboard 3000: (accel) acceleration threshold: 4
[    27.172] (II) event1  - Microsoft Comfort Curve Keyboard 3000: is tagged by udev as: Keyboard
[    27.172] (II) event1  - Microsoft Comfort Curve Keyboard 3000: device is a keyboard
[    27.173] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event9)
[    27.173] (II) No input driver specified, ignoring this device.
[    27.173] (II) This device may have been added with another device file.
[    27.174] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event10)
[    27.174] (II) No input driver specified, ignoring this device.
[    27.174] (II) This device may have been added with another device file.
[    27.175] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event11)
[    27.175] (II) No input driver specified, ignoring this device.
[    27.175] (II) This device may have been added with another device file.
[    27.175] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event12)
[    27.175] (II) No input driver specified, ignoring this device.
[    27.176] (II) This device may have been added with another device file.
[    27.176] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event13)
[    27.176] (II) No input driver specified, ignoring this device.
[    27.176] (II) This device may have been added with another device file.
[    27.178] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event8)
[    27.178] (II) No input driver specified, ignoring this device.
[    27.178] (II) This device may have been added with another device file.
[    27.179] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event5)
[    27.179] (II) No input driver specified, ignoring this device.
[    27.179] (II) This device may have been added with another device file.
[    27.180] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event6)
[    27.180] (II) No input driver specified, ignoring this device.
[    27.180] (II) This device may have been added with another device file.
[    27.181] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event7)
[    27.181] (II) No input driver specified, ignoring this device.
[    27.181] (II) This device may have been added with another device file.
[    27.182] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event14)
[    27.182] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[    27.182] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "libinput pointer catchall"
[    27.182] (II) Using input driver 'libinput' for 'ImExPS/2 Generic Explorer Mouse'
[    27.182] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[    27.182] (**) Option "Device" "/dev/input/event14"
[    27.182] (**) Option "_source" "server/udev"
[    27.183] (II) event14 - ImExPS/2 Generic Explorer Mouse: is tagged by udev as: Mouse
[    27.183] (II) event14 - ImExPS/2 Generic Explorer Mouse: device is a pointer
[    27.183] (II) event14 - ImExPS/2 Generic Explorer Mouse: device removed
[    27.230] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input16/event14"
[    27.230] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 10)
[    27.230] (**) Option "AccelerationScheme" "none"
[    27.230] (**) ImExPS/2 Generic Explorer Mouse: (accel) selected scheme none/0
[    27.230] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[    27.230] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[    27.231] (II) event14 - ImExPS/2 Generic Explorer Mouse: is tagged by udev as: Mouse
[    27.232] (II) event14 - ImExPS/2 Generic Explorer Mouse: device is a pointer
[    27.232] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
[    27.233] (II) No input driver specified, ignoring this device.
[    27.233] (II) This device may have been added with another device file.
[    27.233] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[    27.233] (II) No input driver specified, ignoring this device.
[    27.233] (II) This device may have been added with another device file.
[    27.244] (**) Microsoft Comfort Curve Keyboard 3000: Applying InputClass "evdev keyboard catchall"
[    27.244] (**) Microsoft Comfort Curve Keyboard 3000: Applying InputClass "libinput keyboard catchall"
[    27.244] (**) Microsoft Comfort Curve Keyboard 3000: Applying InputClass "system-keyboard"
[    27.244] (II) Using input driver 'libinput' for 'Microsoft Comfort Curve Keyboard 3000'
[    27.244] (**) Microsoft Comfort Curve Keyboard 3000: always reports core events
[    27.244] (**) Option "Device" "/dev/input/event1"
[    27.244] (**) Option "_source" "_driver/libinput"
[    27.245] (II) libinput: Microsoft Comfort Curve Keyboard 3000: is a virtual subdevice
[    27.245] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/0003:045E:0780.0002/input/input3/event1"
[    27.245] (II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 3000" (type: KEYBOARD, id 11)
[    27.245] (**) Option "xkb_model" "pc105"
[    27.245] (**) Option "xkb_layout" "fr"
[    35.608] (II) NOUVEAU(0): EDID vendor "IVM", prod id 26114
[    35.608] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    35.608] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    35.608] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    35.608] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    35.608] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    35.608] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    35.608] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    35.608] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    35.608] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    35.608] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    35.608] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    35.608] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    35.608] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    35.608] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    35.608] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    35.608] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    35.608] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    35.608] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    35.608] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    35.608] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    35.608] (II) NOUVEAU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    35.609] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    35.609] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    35.609] (II) NOUVEAU(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    35.609] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    35.650] (II) NOUVEAU(0): EDID vendor "IVM", prod id 26114
[    35.650] (II) NOUVEAU(0): Using hsync ranges from config file
[    35.650] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    35.650] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    35.650] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    35.650] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    35.650] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    35.650] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    35.650] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    35.650] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    35.650] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    35.650] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    35.651] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    35.651] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    35.651] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    35.651] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    35.651] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    35.651] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    35.651] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    35.651] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    35.651] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    35.651] (II) NOUVEAU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    35.651] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    35.651] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    35.651] (II) NOUVEAU(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    35.651] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    36.232] (II) NOUVEAU(0): EDID vendor "IVM", prod id 26114
[    36.232] (II) NOUVEAU(0): Using hsync ranges from config file
[    36.232] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    36.232] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    36.232] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    36.232] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    36.232] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    36.232] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    36.232] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    36.232] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    36.232] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    36.233] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    36.233] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    36.233] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    36.233] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    36.233] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    36.233] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    36.233] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    36.233] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    36.233] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    36.233] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    36.233] (II) NOUVEAU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    36.233] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    36.233] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    36.233] (II) NOUVEAU(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    36.233] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    36.323] resize called 1920 1080
[    42.631] (II) NOUVEAU(0): EDID vendor "IVM", prod id 26114
[    42.631] (II) NOUVEAU(0): Using hsync ranges from config file
[    42.631] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    42.631] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    42.631] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    42.631] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    42.631] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    42.631] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    42.631] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    42.631] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    42.631] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    42.631] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    42.631] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    42.631] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    42.631] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    42.631] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    42.631] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    42.631] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    42.632] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    42.632] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    42.632] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    42.632] (II) NOUVEAU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    42.632] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    42.632] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    42.632] (II) NOUVEAU(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    42.632] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[  1018.535] (II) event14 - ImExPS/2 Generic Explorer Mouse: Enabling spurious button debouncing, see https://wayland.freedesktop.org/libinput/doc/1.10.0/button_debouncing.html for details
J' ai relancé la maj en régénérant les dépots, pas de progrès.
Merci pour l'aide éventuelle
Répondre