Suite a la récupération d'un petit écran VGA, je me suis mis en tête de me configurer un dual screen.
N'ayant pas d'adaptateur DVI-D / VGA sous la main, j'ai donc connecté cet écran au chipset (Intel ), tant dis que l'écran principal est plugué à ma carte mère (une GeForce 1080 ).
J'en ai sué toute une journée comme un rat mort ( rat, XFCE, vous l'avez ? ) pour configurer tout ça, et ça fonctionne à peu près.
J'ai un black screen une fois sur deux, mais un petit "xset dpms force off && xset dpms force on" au démarrage et ça passe.
Bref.
Le problème qui se pose c'est que je ne peux pas utiliser un workspace par écran.
Actuellement, je peux juste glisser des fenetres ou des icones vers mon deuxieme écran, et c'est tout.
Celles ci restent attachées à la barre des taches du premier.
En gros j'ai juste un fond d'écran de base XFCE sur lequel je peux balancer des trucs. Mais pas un réel espace de travail.
Voici ce que j'ai essayé de faire :
J'ai d'abord tenté, tout simplement, de mettre un tableau de bord, en ajoutant un élément "bouton des fenetres" : Raté, ce "bouton des fenetres" n'est qu'un clone du premier.
J'ai ensuite essayé awesome : Impossible de le faire fonctionner correctement, bug graphiques de partout, aucune fonction ne répondait, j'ai laissé tomber.
J'ai essayé pas mal de montages hasardeux dans nvidia.conf : Je n'y suis pas parvenu.
J'ai écumé Google, j'ai trouvé pas mal de sujets qui en parlait, mais aucune solution, a part quelques bidouillages a base de devilspie ou autres, mais ce n'est pas ce que je veux.
Infos complémentaires
Pilote utilisé : video-hybrid-intel-nvidia-bumblebee
Utilitaire : xrandr
90-mhwd.conf :
##
## Generated by mhwd - Manjaro Hardware Detection
##
Section "Device"
Identifier "Device0"
Driver "nvidia"
# BusID "PCI:01:00.0"
Option "AccelMethod" "sna"
Option "DRI" "true"
EndSection
Section "Device"
Identifier "Device1"
Driver "intel"
# BusID "PCI:00:02.0"
Option "AccelMethod" "sna"
Option "DRI" "true"
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
Xorg.0.log :
[ 16.625]
X.Org X Server 1.19.5
Release Date: 2017-10-12
[ 16.625] X Protocol Version 11, Revision 0
[ 16.625] Build Operating System: Linux 4.9.54-1-lts x86_64
[ 16.625] Current Operating System: Linux user-pc 4.9.59-1-MANJARO #1 SMP PREEMPT Fri Oct 27 10:59:56 UTC 2017 x86_64
[ 16.625] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9-x86_64 root=UUID=95a3109f-a613-41da-b99e-e0ce379a2d07 rw quiet resume=UUID=a43272de-904a-429c-8397-372dc4958f8e
[ 16.625] Build Date: 12 October 2017 09:59:53PM
[ 16.625]
[ 16.625] Current version of pixman: 0.34.0
[ 16.625] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 16.625] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 16.625] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 6 18:07:01 2017
[ 16.699] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 16.699] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 16.805] (==) No Layout section. Using the first Screen section.
[ 16.805] (==) No screen section available. Using defaults.
[ 16.805] (**) |-->Screen "Default Screen Section" (0)
[ 16.805] (**) | |-->Monitor "<default monitor>"
[ 16.848] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 16.848] (**) | |-->Device "Device0"
[ 16.848] (**) | |-->GPUDevice "Device1"
[ 16.848] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 16.848] (==) Automatically adding devices
[ 16.848] (==) Automatically enabling devices
[ 16.848] (==) Automatically adding GPU devices
[ 16.848] (==) Automatically binding GPU devices
[ 16.848] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 16.888] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 16.888] Entry deleted from font path.
[ 16.888] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 16.888] Entry deleted from font path.
[ 16.888] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 16.888] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 16.888] Entry deleted from font path.
[ 16.888] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 16.888] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 16.888] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 16.888] (**) Extension "Composite" is enabled
[ 16.888] (**) Extension "RENDER" is enabled
[ 16.889] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 16.889] (II) Loader magic: 0x5646409c5d60
[ 16.889] (II) Module ABI versions:
[ 16.889] X.Org ANSI C Emulation: 0.4
[ 16.889] X.Org Video Driver: 23.0
[ 16.889] X.Org XInput driver : 24.1
[ 16.889] X.Org Server Extension : 10.0
[ 16.890] (++) using VT number 7
[ 16.890] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 16.890] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 16.891] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 16.894] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules"
[ 16.894] (**) OutputClass "nvidia" setting /dev/dri/card1 as PrimaryGPU
[ 16.895] (--) PCI: (0:0:2:0) 8086:041e:1458:d000 rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 16.895] (--) PCI:*(0:1:0:0) 10de:1c81:1043:85c7 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 16.895] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 16.895] (II) LoadModule: "glx"
[ 16.909] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[ 17.501] (II) Module glx: vendor="NVIDIA Corporation"
[ 17.501] compiled for 4.0.2, module version = 1.0.0
[ 17.501] Module class: X.Org Server Extension
[ 17.511] (II) NVIDIA GLX Module 384.90 Tue Sep 19 17:00:25 PDT 2017
[ 17.518] (II) LoadModule: "nvidia"
[ 17.562] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 17.772] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 17.772] compiled for 4.0.2, module version = 1.0.0
[ 17.772] Module class: X.Org Video Driver
[ 17.776] (II) LoadModule: "intel"
[ 17.776] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 17.823] (II) Module intel: vendor="X.Org Foundation"
[ 17.823] compiled for 1.19.5, module version = 2.99.917
[ 17.823] Module class: X.Org Video Driver
[ 17.823] ABI class: X.Org Video Driver, version 23.0
[ 17.823] (II) NVIDIA dlloader X Driver 384.90 Tue Sep 19 16:35:54 PDT 2017
[ 17.823] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 17.824] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 17.824] (II) intel: Driver for Intel(R) HD Graphics
[ 17.824] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 17.824] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 17.859] (II) Loading sub module "fb"
[ 17.860] (II) LoadModule: "fb"
[ 17.860] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 17.879] (II) Module fb: vendor="X.Org Foundation"
[ 17.879] compiled for 1.19.5, module version = 1.0.0
[ 17.879] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.879] (II) Loading sub module "wfb"
[ 17.879] (II) LoadModule: "wfb"
[ 17.880] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 17.890] (II) Module wfb: vendor="X.Org Foundation"
[ 17.890] compiled for 1.19.5, module version = 1.0.0
[ 17.890] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.890] (II) Loading sub module "ramdac"
[ 17.890] (II) LoadModule: "ramdac"
[ 17.890] (II) Module "ramdac" already built-in
[ 17.927] (II) intel(G0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
[ 17.927] (II) intel(G0): SNA compiled from 2.99.917-797-g4798e18b
[ 17.928] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 17.928] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 17.928] (==) NVIDIA(0): RGB weight 888
[ 17.928] (==) NVIDIA(0): Default visual is TrueColor
[ 17.928] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 17.930] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 17.930] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 17.930] (**) NVIDIA(0): Enabling 2D acceleration
[ 18.675] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 18.675] (--) NVIDIA(0): DFP-0
[ 18.675] (--) NVIDIA(0): DFP-1 (boot)
[ 18.675] (--) NVIDIA(0): DFP-2
[ 18.675] (--) NVIDIA(0): DFP-3
[ 18.676] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1050 (GP107-A) at PCI:1:0:0 (GPU-0)
[ 18.676] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 18.676] (--) NVIDIA(0): VideoBIOS: 86.07.2f.00.24
[ 18.676] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 18.676] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 18.676] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 18.676] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 18.676] (--) NVIDIA(GPU-0):
[ 18.706] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VX239 (DFP-1): connected
[ 18.706] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VX239 (DFP-1): Internal TMDS
[ 18.706] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VX239 (DFP-1): 600.0 MHz maximum pixel clock
[ 18.706] (--) NVIDIA(GPU-0):
[ 18.706] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 18.706] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 18.706] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[ 18.706] (--) NVIDIA(GPU-0):
[ 18.706] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 18.706] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 18.706] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 18.706] (--) NVIDIA(GPU-0):
[ 18.708] (==) NVIDIA(0):
[ 18.708] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 18.708] (==) NVIDIA(0): will be used as the requested mode.
[ 18.708] (==) NVIDIA(0):
[ 18.709] (II) NVIDIA(0): Validated MetaModes:
[ 18.709] (II) NVIDIA(0): "DFP-1:nvidia-auto-select"
[ 18.709] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 18.716] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[ 18.716] (--) NVIDIA(0): option
[ 18.716] (--) intel(G0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 18.716] (--) intel(G0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[ 18.716] (==) intel(G0): Depth 24, (--) framebuffer bpp 32
[ 18.716] (==) intel(G0): RGB weight 888
[ 18.716] (==) intel(G0): Default visual is TrueColor
[ 18.716] (**) intel(G0): Option "AccelMethod" "sna"
[ 18.716] (**) intel(G0): Option "DRI" "true"
[ 18.717] (II) intel(G0): Output VGA1 using monitor section VGA1
[ 18.717] (**) intel(G0): Option "PreferredMode" "1024x768"
[ 18.717] (**) intel(G0): Option "Position" "1920 312"
[ 18.717] (II) intel(G0): Enabled output VGA1
[ 18.717] (II) intel(G0): Output HDMI1 using monitor section HDMI1
[ 18.717] (**) intel(G0): Option "PreferredMode" "1920x1080"
[ 18.717] (**) intel(G0): Option "Position" "0 0"
[ 18.717] (II) intel(G0): Enabled output HDMI1
[ 18.717] (II) intel(G0): Output HDMI2 has no monitor section
[ 18.717] (II) intel(G0): Enabled output HDMI2
[ 18.717] (--) intel(G0): Using a maximum size of 256x256 for hardware cursors
[ 18.717] (II) intel(G0): Output VIRTUAL1 has no monitor section
[ 18.717] (II) intel(G0): Enabled output VIRTUAL1
[ 18.718] (II) intel(G0): EDID for output HDMI1
[ 18.719] (II) intel(G0): EDID for output HDMI2
[ 18.732] (II) intel(G0): EDID for output VGA1
[ 18.732] (II) intel(G0): Manufacturer: IQT Model: 9008 Serial#: 1568
[ 18.732] (II) intel(G0): Year: 2009 Week: 53
[ 18.732] (II) intel(G0): EDID Version: 1.3
[ 18.732] (II) intel(G0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 18.732] (II) intel(G0): Sync: Separate
[ 18.732] (II) intel(G0): Max Image Size [cm]: horiz.: 43 vert.: 26
[ 18.732] (II) intel(G0): Gamma: 2.20
[ 18.732] (II) intel(G0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 18.732] (II) intel(G0): First detailed timing is preferred mode
[ 18.732] (II) intel(G0): redX: 0.640 redY: 0.340 greenX: 0.295 greenY: 0.610
[ 18.732] (II) intel(G0): blueX: 0.145 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 18.732] (II) intel(G0): Supported established timings:
[ 18.732] (II) intel(G0): 720x400@70Hz
[ 18.732] (II) intel(G0): 640x480@60Hz
[ 18.732] (II) intel(G0): 640x480@75Hz
[ 18.732] (II) intel(G0): 800x600@60Hz
[ 18.732] (II) intel(G0): 800x600@75Hz
[ 18.732] (II) intel(G0): 1024x768@60Hz
[ 18.732] (II) intel(G0): 1024x768@75Hz
[ 18.732] (II) intel(G0): Manufacturer's mask: 0
[ 18.732] (II) intel(G0): Supported standard timings:
[ 18.732] (II) intel(G0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 18.732] (II) intel(G0): Supported detailed timing:
[ 18.732] (II) intel(G0): clock: 85.5 MHz Image Size: 430 x 255 mm
[ 18.732] (II) intel(G0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0
[ 18.732] (II) intel(G0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0
[ 18.732] (II) intel(G0): Monitor name: HDIT19W DSUB
[ 18.732] (II) intel(G0): Ranges: V min: 50 V max: 75 Hz, H min: 28 H max: 82 kHz, PixClock max 165 MHz
[ 18.732] (II) intel(G0): Serial No: X960WE9B01568
[ 18.732] (II) intel(G0): EDID (in hex):
[ 18.732] (II) intel(G0): 00ffffffffffff002634089020060000
[ 18.732] (II) intel(G0): 35130103082b1a78eac905a3574b9c25
[ 18.732] (II) intel(G0): 125054a54a0081c00101010101010101
[ 18.732] (II) intel(G0): 010101010101662156aa51001e30468f
[ 18.732] (II) intel(G0): 3300aeff1000001e000000fc00484449
[ 18.732] (II) intel(G0): 5431395720445355420a000000fd0032
[ 18.732] (II) intel(G0): 4b1c5210000a202020202020000000ff
[ 18.732] (II) intel(G0): 00583936305745394230313536380011
[ 18.732] (II) intel(G0): Printing probed modes for output VGA1
[ 18.732] (II) intel(G0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz UeP)
[ 18.732] (II) intel(G0): Modeline "1366x768"x60.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 18.732] (II) intel(G0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 18.732] (II) intel(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 18.732] (II) intel(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 18.732] (II) intel(G0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 18.732] (II) intel(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 18.732] (II) intel(G0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 18.732] (II) intel(G0): Modeline "720x400"x70.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 18.732] (II) intel(G0): EDID for output VIRTUAL1
[ 18.732] (==) intel(G0): TearFree disabled
[ 18.732] (==) intel(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 18.732] (==) intel(G0): DPI set to (96, 96)
[ 18.732] (II) Loading sub module "dri3"
[ 18.732] (II) LoadModule: "dri3"
[ 18.732] (II) Module "dri3" already built-in
[ 18.732] (II) Loading sub module "dri2"
[ 18.732] (II) LoadModule: "dri2"
[ 18.732] (II) Module "dri2" already built-in
[ 18.732] (II) Loading sub module "present"
[ 18.732] (II) LoadModule: "present"
[ 18.732] (II) Module "present" already built-in
[ 18.732] (--) Depth 24 pixmap format is 32 bpp
[ 18.748] (II) intel(G0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 18.748] (==) intel(G0): Backing store enabled
[ 18.748] (==) intel(G0): Silken mouse enabled
[ 18.748] (II) intel(G0): HW Cursor enabled
[ 18.748] (II) intel(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 18.749] (==) intel(G0): DPMS enabled
[ 18.749] (==) intel(G0): Display hotplug detection enabled
[ 18.749] (II) intel(G0): [DRI2] Setup complete
[ 18.749] (II) intel(G0): [DRI2] DRI driver: i965
[ 18.749] (II) intel(G0): [DRI2] VDPAU driver: va_gl
[ 18.749] (II) intel(G0): direct rendering: DRI2 DRI3 enabled
[ 18.749] (II) intel(G0): hardware support for Present enabled
[ 18.750] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[ 18.750] (II) NVIDIA: access.
[ 18.752] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 18.752] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 18.752] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 18.752] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 18.752] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 18.752] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 18.752] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 18.752] (II) NVIDIA(0): Config Options in the README.
[ 18.778] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[ 18.828] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 18.828] (==) NVIDIA(0): Backing store enabled
[ 18.828] (==) NVIDIA(0): Silken mouse enabled
[ 18.828] (==) NVIDIA(0): DPMS enabled
[ 18.850] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 18.850] (WW) NVIDIA(0): Option "AccelMethod" is not used
[ 18.850] (WW) NVIDIA(0): Option "DRI" is not used
[ 18.850] (II) Loading sub module "dri2"
[ 18.850] (II) LoadModule: "dri2"
[ 18.850] (II) Module "dri2" already built-in
[ 18.850] (II) NVIDIA(0): [DRI2] Setup complete
[ 18.850] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 18.850] (--) RandR disabled
[ 18.853] (II) Initializing extension GLX
[ 18.853] (II) Indirect GLX disabled.
[ 19.188] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 19.188] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.188] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 19.188] (**) Power Button: Applying InputClass "system-keyboard"
[ 19.188] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 19.188] (II) LoadModule: "libinput"
[ 19.188] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 19.220] (II) Module libinput: vendor="X.Org Foundation"
[ 19.220] compiled for 1.19.3, module version = 0.26.0
[ 19.220] Module class: X.Org XInput Driver
[ 19.220] ABI class: X.Org XInput driver, version 24.1
[ 19.220] (II) Using input driver 'libinput' for 'Power Button'
[ 19.220] (**) Power Button: always reports core events
[ 19.220] (**) Option "Device" "/dev/input/event6"
[ 19.220] (**) Option "_source" "server/udev"
[ 19.221] (II) event6 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 19.221] (II) event6 - (II) Power Button: (II) device is a keyboard
[ 19.221] (II) event6 - (II) Power Button: (II) device removed
[ 19.243] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event6"
[ 19.243] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 19.243] (**) Option "xkb_model" "pc105"
[ 19.243] (**) Option "xkb_layout" "fr"
[ 19.243] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 19.256] (II) event6 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 19.256] (II) event6 - (II) Power Button: (II) device is a keyboard
[ 19.256] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 19.257] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 19.257] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 19.257] (**) Video Bus: Applying InputClass "system-keyboard"
[ 19.257] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[ 19.257] (II) Using input driver 'libinput' for 'Video Bus'
[ 19.257] (**) Video Bus: always reports core events
[ 19.257] (**) Option "Device" "/dev/input/event8"
[ 19.257] (**) Option "_source" "server/udev"
[ 19.257] (II) event8 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 19.257] (II) event8 - (II) Video Bus: (II) device is a keyboard
[ 19.257] (II) event8 - (II) Video Bus: (II) device removed
[ 19.296] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event8"
[ 19.296] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 19.296] (**) Option "xkb_model" "pc105"
[ 19.296] (**) Option "xkb_layout" "fr"
[ 19.296] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 19.297] (II) event8 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 19.297] (II) event8 - (II) Video Bus: (II) device is a keyboard
[ 19.297] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 19.297] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.297] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 19.297] (**) Power Button: Applying InputClass "system-keyboard"
[ 19.297] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 19.297] (II) Using input driver 'libinput' for 'Power Button'
[ 19.297] (**) Power Button: always reports core events
[ 19.297] (**) Option "Device" "/dev/input/event5"
[ 19.297] (**) Option "_source" "server/udev"
[ 19.297] (II) event5 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 19.297] (II) event5 - (II) Power Button: (II) device is a keyboard
[ 19.298] (II) event5 - (II) Power Button: (II) device removed
[ 19.320] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event5"
[ 19.320] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 19.320] (**) Option "xkb_model" "pc105"
[ 19.320] (**) Option "xkb_layout" "fr"
[ 19.320] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 19.320] (II) event5 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 19.320] (II) event5 - (II) Power Button: (II) device is a keyboard
[ 19.320] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event20)
[ 19.320] (II) No input driver specified, ignoring this device.
[ 19.320] (II) This device may have been added with another device file.
[ 19.320] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event21)
[ 19.320] (II) No input driver specified, ignoring this device.
[ 19.320] (II) This device may have been added with another device file.
[ 19.321] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event22)
[ 19.321] (II) No input driver specified, ignoring this device.
[ 19.321] (II) This device may have been added with another device file.
[ 19.321] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event9)
[ 19.321] (II) No input driver specified, ignoring this device.
[ 19.321] (II) This device may have been added with another device file.
[ 19.321] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event10)
[ 19.321] (II) No input driver specified, ignoring this device.
[ 19.321] (II) This device may have been added with another device file.
[ 19.321] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event11)
[ 19.321] (II) No input driver specified, ignoring this device.
[ 19.321] (II) This device may have been added with another device file.
[ 19.322] (II) config/udev: Adding input device Mad Catz Mad Catz R.A.T. Pro S (/dev/input/event2)
[ 19.322] (**) Mad Catz Mad Catz R.A.T. Pro S: Applying InputClass "evdev pointer catchall"
[ 19.322] (**) Mad Catz Mad Catz R.A.T. Pro S: Applying InputClass "libinput pointer catchall"
[ 19.322] (II) Using input driver 'libinput' for 'Mad Catz Mad Catz R.A.T. Pro S'
[ 19.322] (**) Mad Catz Mad Catz R.A.T. Pro S: always reports core events
[ 19.322] (**) Option "Device" "/dev/input/event2"
[ 19.322] (**) Option "_source" "server/udev"
[ 19.376] (II) event2 - (II) Mad Catz Mad Catz R.A.T. Pro S: (II) is tagged by udev as: Mouse
[ 19.376] (II) event2 - (II) Mad Catz Mad Catz R.A.T. Pro S: (II) device is a pointer
[ 19.376] (II) event2 - (II) Mad Catz Mad Catz R.A.T. Pro S: (II) device removed
[ 19.426] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:0738:1722.0003/input/input4/event2"
[ 19.490] (II) XINPUT: Adding extended input device "Mad Catz Mad Catz R.A.T. Pro S" (type: MOUSE, id 9)
[ 19.490] (**) Option "AccelerationScheme" "none"
[ 19.490] (**) Mad Catz Mad Catz R.A.T. Pro S: (accel) selected scheme none/0
[ 19.490] (**) Mad Catz Mad Catz R.A.T. Pro S: (accel) acceleration factor: 2.000
[ 19.490] (**) Mad Catz Mad Catz R.A.T. Pro S: (accel) acceleration threshold: 4
[ 19.546] (II) event2 - (II) Mad Catz Mad Catz R.A.T. Pro S: (II) is tagged by udev as: Mouse
[ 19.547] (II) event2 - (II) Mad Catz Mad Catz R.A.T. Pro S: (II) device is a pointer
[ 19.547] (II) config/udev: Adding input device Mad Catz Mad Catz R.A.T. Pro S (/dev/input/mouse0)
[ 19.547] (II) No input driver specified, ignoring this device.
[ 19.547] (II) This device may have been added with another device file.
[ 19.547] (II) config/udev: Adding input device Mad Catz Mad Catz R.A.T. Pro S (/dev/input/event3)
[ 19.547] (**) Mad Catz Mad Catz R.A.T. Pro S: Applying InputClass "evdev keyboard catchall"
[ 19.547] (**) Mad Catz Mad Catz R.A.T. Pro S: Applying InputClass "libinput keyboard catchall"
[ 19.547] (**) Mad Catz Mad Catz R.A.T. Pro S: Applying InputClass "system-keyboard"
[ 19.547] (**) Mad Catz Mad Catz R.A.T. Pro S: Applying InputClass "Keyboard Defaults"
[ 19.547] (II) Using input driver 'libinput' for 'Mad Catz Mad Catz R.A.T. Pro S'
[ 19.547] (**) Mad Catz Mad Catz R.A.T. Pro S: always reports core events
[ 19.547] (**) Option "Device" "/dev/input/event3"
[ 19.547] (**) Option "_source" "server/udev"
[ 19.548] (II) event3 - (II) Mad Catz Mad Catz R.A.T. Pro S: (II) is tagged by udev as: Keyboard
[ 19.548] (II) event3 - (II) Mad Catz Mad Catz R.A.T. Pro S: (II) device is a keyboard
[ 19.548] (II) event3 - (II) Mad Catz Mad Catz R.A.T. Pro S: (II) device removed
[ 19.566] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.2/0003:0738:1722.0005/input/input5/event3"
[ 19.566] (II) XINPUT: Adding extended input device "Mad Catz Mad Catz R.A.T. Pro S" (type: KEYBOARD, id 10)
[ 19.566] (**) Option "xkb_model" "pc105"
[ 19.566] (**) Option "xkb_layout" "fr"
[ 19.566] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 19.567] (II) event3 - (II) Mad Catz Mad Catz R.A.T. Pro S: (II) is tagged by udev as: Keyboard
[ 19.567] (II) event3 - (II) Mad Catz Mad Catz R.A.T. Pro S: (II) device is a keyboard
[ 19.567] (II) config/udev: Adding input device Mad Catz Mad Catz R.A.T. Pro S (/dev/input/event4)
[ 19.567] (**) Mad Catz Mad Catz R.A.T. Pro S: Applying InputClass "evdev keyboard catchall"
[ 19.567] (**) Mad Catz Mad Catz R.A.T. Pro S: Applying InputClass "libinput keyboard catchall"
[ 19.567] (**) Mad Catz Mad Catz R.A.T. Pro S: Applying InputClass "system-keyboard"
[ 19.567] (**) Mad Catz Mad Catz R.A.T. Pro S: Applying InputClass "Keyboard Defaults"
[ 19.567] (II) Using input driver 'libinput' for 'Mad Catz Mad Catz R.A.T. Pro S'
[ 19.567] (**) Mad Catz Mad Catz R.A.T. Pro S: always reports core events
[ 19.567] (**) Option "Device" "/dev/input/event4"
[ 19.567] (**) Option "_source" "server/udev"
[ 19.567] (II) event4 - (II) Mad Catz Mad Catz R.A.T. Pro S: (II) is tagged by udev as: Keyboard
[ 19.567] (II) event4 - (II) Mad Catz Mad Catz R.A.T. Pro S: (II) device is a keyboard
[ 19.567] (II) event4 - (II) Mad Catz Mad Catz R.A.T. Pro S: (II) device removed
[ 19.586] (II) libinput: Mad Catz Mad Catz R.A.T. Pro S: needs a virtual subdevice
[ 19.586] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.3/0003:0738:1722.0006/input/input6/event4"
[ 19.586] (II) XINPUT: Adding extended input device "Mad Catz Mad Catz R.A.T. Pro S" (type: MOUSE, id 11)
[ 19.586] (**) Option "AccelerationScheme" "none"
[ 19.586] (**) Mad Catz Mad Catz R.A.T. Pro S: (accel) selected scheme none/0
[ 19.586] (**) Mad Catz Mad Catz R.A.T. Pro S: (accel) acceleration factor: 2.000
[ 19.586] (**) Mad Catz Mad Catz R.A.T. Pro S: (accel) acceleration threshold: 4
[ 19.587] (II) event4 - (II) Mad Catz Mad Catz R.A.T. Pro S: (II) is tagged by udev as: Keyboard
[ 19.587] (II) event4 - (II) Mad Catz Mad Catz R.A.T. Pro S: (II) device is a keyboard
[ 19.587] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event0)
[ 19.587] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 19.587] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 19.587] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard"
[ 19.587] (**) Logitech USB Keyboard: Applying InputClass "Keyboard Defaults"
[ 19.587] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[ 19.587] (**) Logitech USB Keyboard: always reports core events
[ 19.587] (**) Option "Device" "/dev/input/event0"
[ 19.587] (**) Option "_source" "server/udev"
[ 19.587] (II) event0 - (II) Logitech USB Keyboard: (II) is tagged by udev as: Keyboard
[ 19.587] (II) event0 - (II) Logitech USB Keyboard: (II) device is a keyboard
[ 19.587] (II) event0 - (II) Logitech USB Keyboard: (II) device removed
[ 19.606] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:046D:C31C.0001/input/input2/event0"
[ 19.606] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 12)
[ 19.606] (**) Option "xkb_model" "pc105"
[ 19.606] (**) Option "xkb_layout" "fr"
[ 19.606] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 19.607] (II) event0 - (II) Logitech USB Keyboard: (II) is tagged by udev as: Keyboard
[ 19.607] (II) event0 - (II) Logitech USB Keyboard: (II) device is a keyboard
[ 19.607] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1)
[ 19.607] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 19.607] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 19.607] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard"
[ 19.607] (**) Logitech USB Keyboard: Applying InputClass "Keyboard Defaults"
[ 19.607] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[ 19.607] (**) Logitech USB Keyboard: always reports core events
[ 19.607] (**) Option "Device" "/dev/input/event1"
[ 19.607] (**) Option "_source" "server/udev"
[ 19.607] (II) event1 - (II) Logitech USB Keyboard: (II) is tagged by udev as: Keyboard
[ 19.607] (II) event1 - (II) Logitech USB Keyboard: (II) device is a keyboard
[ 19.607] (II) event1 - (II) Logitech USB Keyboard: (II) device removed
[ 19.620] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:046D:C31C.0002/input/input3/event1"
[ 19.620] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 13)
[ 19.620] (**) Option "xkb_model" "pc105"
[ 19.620] (**) Option "xkb_layout" "fr"
[ 19.620] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 19.620] (II) event1 - (II) Logitech USB Keyboard: (II) is tagged by udev as: Keyboard
[ 19.620] (II) event1 - (II) Logitech USB Keyboard: (II) device is a keyboard
[ 19.620] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 19.620] (II) No input driver specified, ignoring this device.
[ 19.620] (II) This device may have been added with another device file.
[ 19.620] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event13)
[ 19.620] (II) No input driver specified, ignoring this device.
[ 19.620] (II) This device may have been added with another device file.
[ 19.620] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event14)
[ 19.620] (II) No input driver specified, ignoring this device.
[ 19.620] (II) This device may have been added with another device file.
[ 19.621] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event15)
[ 19.621] (II) No input driver specified, ignoring this device.
[ 19.621] (II) This device may have been added with another device file.
[ 19.621] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event16)
[ 19.621] (II) No input driver specified, ignoring this device.
[ 19.621] (II) This device may have been added with another device file.
[ 19.621] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event17)
[ 19.621] (II) No input driver specified, ignoring this device.
[ 19.621] (II) This device may have been added with another device file.
[ 19.621] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event18)
[ 19.621] (II) No input driver specified, ignoring this device.
[ 19.621] (II) This device may have been added with another device file.
[ 19.621] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event19)
[ 19.621] (II) No input driver specified, ignoring this device.
[ 19.621] (II) This device may have been added with another device file.
[ 19.621] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 19.621] (II) No input driver specified, ignoring this device.
[ 19.621] (II) This device may have been added with another device file.
[ 19.623] (**) Mad Catz Mad Catz R.A.T. Pro S: Applying InputClass "evdev keyboard catchall"
[ 19.623] (**) Mad Catz Mad Catz R.A.T. Pro S: Applying InputClass "libinput keyboard catchall"
[ 19.623] (**) Mad Catz Mad Catz R.A.T. Pro S: Applying InputClass "system-keyboard"
[ 19.623] (**) Mad Catz Mad Catz R.A.T. Pro S: Applying InputClass "Keyboard Defaults"
[ 19.623] (II) Using input driver 'libinput' for 'Mad Catz Mad Catz R.A.T. Pro S'
[ 19.623] (**) Mad Catz Mad Catz R.A.T. Pro S: always reports core events
[ 19.623] (**) Option "Device" "/dev/input/event4"
[ 19.623] (**) Option "_source" "_driver/libinput"
[ 19.623] (II) libinput: Mad Catz Mad Catz R.A.T. Pro S: is a virtual subdevice
[ 19.623] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.3/0003:0738:1722.0006/input/input6/event4"
[ 19.623] (II) XINPUT: Adding extended input device "Mad Catz Mad Catz R.A.T. Pro S" (type: KEYBOARD, id 14)
[ 19.623] (**) Option "xkb_model" "pc105"
[ 19.623] (**) Option "xkb_layout" "fr"
[ 19.623] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 33.823] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 34.108] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 34.108] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 34.108] (--) NVIDIA(GPU-0):
[ 34.138] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VX239 (DFP-1): connected
[ 34.138] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VX239 (DFP-1): Internal TMDS
[ 34.138] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VX239 (DFP-1): 600.0 MHz maximum pixel clock
[ 34.138] (--) NVIDIA(GPU-0):
[ 34.138] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 34.138] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 34.138] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[ 34.138] (--) NVIDIA(GPU-0):
[ 34.138] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 34.138] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 34.138] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 34.138] (--) NVIDIA(GPU-0):
[ 34.138] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 34.138] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 34.138] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 34.138] (--) NVIDIA(GPU-0):
[ 34.168] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VX239 (DFP-1): connected
[ 34.168] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VX239 (DFP-1): Internal TMDS
[ 34.168] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VX239 (DFP-1): 600.0 MHz maximum pixel clock
[ 34.168] (--) NVIDIA(GPU-0):
[ 34.168] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 34.168] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 34.168] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[ 34.168] (--) NVIDIA(GPU-0):
[ 34.168] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 34.168] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 34.168] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 34.168] (--) NVIDIA(GPU-0):
[ 34.496] randr: falling back to unsynchronized pixmap sharing
[ 34.541] (II) intel(G0): switch to mode 1024x768@60.0 on VGA1 using pipe 0, position (1920, 0), rotation normal, reflection none
[ 40.306] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 40.306] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 40.306] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 40.306] (--) NVIDIA(GPU-0):
[ 40.336] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VX239 (DFP-1): connected
[ 40.336] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VX239 (DFP-1): Internal TMDS
[ 40.336] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VX239 (DFP-1): 600.0 MHz maximum pixel clock
[ 40.336] (--) NVIDIA(GPU-0):
[ 40.336] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 40.336] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 40.336] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[ 40.336] (--) NVIDIA(GPU-0):
[ 40.336] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 40.336] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 40.336] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 40.336] (--) NVIDIA(GPU-0):
[ 40.340] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 40.341] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 40.341] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 40.341] (--) NVIDIA(GPU-0):
[ 40.370] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VX239 (DFP-1): connected
[ 40.370] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VX239 (DFP-1): Internal TMDS
[ 40.370] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VX239 (DFP-1): 600.0 MHz maximum pixel clock
[ 40.370] (--) NVIDIA(GPU-0):
[ 40.370] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 40.370] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 40.370] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[ 40.370] (--) NVIDIA(GPU-0):
[ 40.371] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 40.371] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 40.371] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 40.371] (--) NVIDIA(GPU-0):
[ 371.016] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 371.016] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 371.016] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 371.016] (--) NVIDIA(GPU-0):
[ 371.045] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VX239 (DFP-1): connected
[ 371.045] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VX239 (DFP-1): Internal TMDS
[ 371.045] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VX239 (DFP-1): 600.0 MHz maximum pixel clock
[ 371.045] (--) NVIDIA(GPU-0):
[ 371.045] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 371.045] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 371.045] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[ 371.045] (--) NVIDIA(GPU-0):
[ 371.046] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 371.046] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 371.046] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 371.046] (--) NVIDIA(GPU-0):
[ 371.046] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 371.046] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 371.046] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 371.046] (--) NVIDIA(GPU-0):
[ 371.075] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VX239 (DFP-1): connected
[ 371.075] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VX239 (DFP-1): Internal TMDS
[ 371.075] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS VX239 (DFP-1): 600.0 MHz maximum pixel clock
[ 371.075] (--) NVIDIA(GPU-0):
[ 371.075] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 371.075] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 371.075] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[ 371.075] (--) NVIDIA(GPU-0):
[ 371.076] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 371.076] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 371.076] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 371.076] (--) NVIDIA(GPU-0):
Je suis vraiment désolé pour ce pavé indigeste, mais j'en peux plus, j'y suis depuis le milieux de la nuit, je rend les armes.
Si quelqu'un a une idée...