Page 1 sur 1

connexion casque audio bluetooth

Publié : 02 jan 2018, 19:25
par adrien050356
Bonjour,

J'ai acheté un casque audio bluetooth JBL E450 que j'aimerais pouvoir connecté à mon ordinnateur, mais je n'y arrive pas. Sous windows pas de soucie, mais sous manjaro mon casque est detecté mais lorque je clic sur "connecter" ca ne marche pas.

Si vous avez une solution je suis preneur :)

je pose le resultats de la commande suivant ici, si ca peut être utile :

adrien@adrien ~ % systemctl status bluetooth  
● bluetooth.service - Bluetooth service
   Loaded: loaded (/usr/lib/systemd/system/bluetooth.service; enabled; vendor preset: disabled)
   Active: active (running) since Tue 2018-01-02 18:43:32 CET; 40min ago
     Docs: man:bluetoothd(8)
 Main PID: 585 (bluetoothd)
   Status: "Running"
    Tasks: 1 (limit: 4915)
   CGroup: /system.slice/bluetooth.service
           └─585 /usr/lib/bluetooth/bluetoothd

janv. 02 18:43:31 adrien systemd[1]: Starting Bluetooth service...
janv. 02 18:43:32 adrien bluetoothd[585]: Bluetooth daemon 5.48
janv. 02 18:43:32 adrien systemd[1]: Started Bluetooth service.
janv. 02 18:43:32 adrien bluetoothd[585]: Starting SDP server
janv. 02 18:43:32 adrien bluetoothd[585]: Bluetooth management interface 1.14 initialized
janv. 02 18:44:38 adrien bluetoothd[585]: Endpoint registered: sender=:1.38 path=/MediaEndpoint/A2DPSource
janv. 02 18:44:38 adrien bluetoothd[585]: Endpoint registered: sender=:1.38 path=/MediaEndpoint/A2DPSink

Re: conexion casque audio bluetooth

Publié : 02 jan 2018, 19:31
par stephane
tu as été voir dans pavucontrol ?

Re: conexion casque audio bluetooth

Publié : 07 jan 2018, 17:17
par adrien050356
ha non !? enfin peut être. Je comprends pas trop comment ça marche tout ça. On dirait qu'il y a plusieurs trucs a configurer. Tu peux m'en dire plus ?

Re: conexion casque audio bluetooth

Publié : 07 jan 2018, 17:27
par lemust83
Bonjour
Tu envoie une source audio, tu fais pavucontrol ou Menu > Multimédia > Control de volume PulseAudio: Onglet lecture et tu devrais voir une ligne de niveau avec le choix des cartes .
Sinon, plus globalement, j'avais fait un topo sur les casques BT.
91472

Re: conexion casque audio bluetooth

Publié : 08 jan 2018, 18:13
par adrien050356
hum, je n'ai pas pavucontrol. Il n'est pas installé.
Est-ce que c'est simplement un IHM pour configurer ou bien le paquet est nécéssaire ? Parce que j'ai suivie l'ArchWiki concernant les casques audio bluetooth et j'ai tout les paquets indiqué d'installé :
https://wiki.archlinux.org/index.php/Bluetooth_headset

en revanche, dans ce wiki là, dans la section audio, il est dit d'ajouter une ligne au dossier /etc/bluetooth/audio.conf. Hors ce dossier n'existe pas de mon côté.
https://wiki.archlinux.org/index.php/bluetooth

Dans ton tuto tu parle de taper la commande suivant : pactl load-module module-bluetooth-discover
voilà ce que j'obtiens (pas grand chose donc).

adrien@adrien ~ % pactl load-module module-bluetooth-discover
Échec : Échec lors de l'initialisation du module

Re: conexion casque audio bluetooth

Publié : 09 jan 2018, 03:22
par lemust83
Bonjour
Peux-tu donner le retour de cat /etc/*release?
Pavucontrol est normalement installé par défaut dans Xfce. Au besoin, installe le ainsi que pulse-audio-bluetooth et relance pactl load-module module-bluetooth-discover (sans %).

Re: conexion casque audio bluetooth

Publié : 10 jan 2018, 19:39
par adrien050356

adrien@adrien ~ % cat /etc/*release
Manjaro Linux
DISTRIB_ID=ManjaroLinux
DISTRIB_RELEASE=17.1.0
DISTRIB_CODENAME=Hakoila
DISTRIB_DESCRIPTION="Manjaro Linux"
Manjaro Linux
NAME="Manjaro Linux"
ID=manjaro
PRETTY_NAME="Manjaro Linux"
ANSI_COLOR="1;32"
HOME_URL="https://www.manjaro.org/"
SUPPORT_URL="https://www.manjaro.org/"
BUG_REPORT_URL="https://bugs.manjaro.org/"
J'ai installé pavucontrol. Pulseaudio-bluetooth était déjà installé. Mais ca ne change pas grand chose. Dans les périphériques de sortie, il me marque le casque audio comme "unplugged".

pactl load-module module-bluetooth-discover ne marche toujours pas.

en revanche, je sais plus où et comment j'ai constaté ça, mais il est demandé à un moment de modifier le fichier etc/bluetooth/audio.conf. Mais il n'est pas présent chez moi...?

Re: connexion casque audio bluetooth

Publié : 10 jan 2018, 23:16
par lemust83
Bonjour
Donne nous systemctl status blue* et dmesg |grep Bluetooth. Je me demande si le service Bluetooth n'est pas dégradé.

Re: connexion casque audio bluetooth

Publié : 12 jan 2018, 18:23
par adrien050356

adrien@adrien ~ % systemctl status blue*
zsh: no matches found: blue*

adrien@adrien ~ % dmesg | grep Bluetooth
[   11.616422] Bluetooth: Core ver 2.22
[   11.616436] Bluetooth: HCI device and connection manager initialized
[   11.616439] Bluetooth: HCI socket layer initialized
[   11.616440] Bluetooth: L2CAP socket layer initialized
[   11.616443] Bluetooth: SCO socket layer initialized
[   23.431379] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   23.431379] Bluetooth: BNEP filters: protocol multicast
[   23.431382] Bluetooth: BNEP socket layer initialized
[   61.719944] Bluetooth: RFCOMM TTY layer initialized
[   61.719956] Bluetooth: RFCOMM socket layer initialized
[   61.719965] Bluetooth: RFCOMM ver 1.11

Re: connexion casque audio bluetooth

Publié : 20 jan 2018, 11:56
par adrien050356
personne ? :)