Problèmes et questions sur les environnements graphiques et les applications.

Démarrage un peu lent

#1Messageil y a 2 mois

Je trouve mon démarrage peu rapide. Que devrai-je améliorer ?

~]$ systemd-analyze blame
    3min 31.465s updatedb.service
    1min 46.252s man-db.service
         14.332s systemd-journal-flush.service
         13.255s NetworkManager-wait-online.service
          8.076s ModemManager.service
          6.176s lvm2-monitor.service
          4.858s dev-sda2.device
          3.632s systemd-logind.service
          3.548s NetworkManager.service
          3.324s snapd.service
          3.192s ufw.service
          2.700s lightdm-plymouth.service
          2.695s plymouth-quit-wait.service
          2.688s avahi-daemon.service
          2.684s bluetooth.service
          2.682s logrotate.service
          2.365s org.cups.cupsd.service
          1.335s polkit.service
          1.219s systemd-fsck@dev-disk-by\x2duuid-61941982\x2d3c0d\x2d46ef\x2db>
          1.198s colord.service
          1.187s tmp.mount
          1.169s systemd-fsck@dev-disk-by\x2duuid-CFA2\x2d5004.service
           986ms udisks2.service
lines 1-23

~]$ dmesg
[    0.000000] ACPI: DSDT 0x000000003AFE7000 010152 (v01 HPQOEM 18A4     00000000 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000003AFBA000 000040
[    0.000000] ACPI: UEFI 0x000000003AFFD000 000236 (v01 HPQOEM 18A4     00000001 HP   00040000)
[    0.000000] ACPI: ASF! 0x000000003AFFC000 0000A5 (v32 HPQOEM 18A4     00000001 HP   00040000)
[    0.000000] ACPI: HPET 0x000000003AFFA000 000038 (v01 HPQOEM 18A4     00000001 HP   00040000)
[    0.000000] ACPI: APIC 0x000000003AFF9000 00008C (v03 HPQOEM 18A4     00000001 HP   00040000)
[    0.000000] ACPI: MCFG 0x000000003AFF8000 00003C (v01 HPQOEM 18A4     00000001 HP   00040000)
[    0.000000] ACPI: WDAT 0x000000003AFE6000 000224 (v01 HPQOEM 18A4     00000001 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000003AFE5000 0006FE (v01 HPQOEM 18A4     00001000 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000003AFE3000 000028 (v01 HPQOEM 18A4     00000001 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000003AFE2000 0004C1 (v01 HPQOEM 18A4     00001000 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x000000003AFE0000 000034 (v07 HPQOEM 18A4     00000001 HP   00040000)
[    0.000000] ACPI: DBGP 0x000000003AFDF000 000034 (v01 HPQOEM 18A4     00000001 HP   00040000)
[    0.000000] ACPI: FPDT 0x000000003AFDD000 000044 (v01 HPQOEM 18A4     00000001 HP   00040000)
[    0.000000] ACPI: MSDM 0x000000003AFDC000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000003AFDB000 0009AA (v01 HPQOEM 18A4     00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000003AFDA000 000B22 (v01 HPQOEM 18A4     00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000003AFD7000 001F1F (v01 HPQOEM 18A4     00001000 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x000000003AFD9000 000038 (v01 HPQOEM 18A4     00000001 HP   00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23f5f8000-0x23f5fbfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000087fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003a4befff]
[    0.000000]   node   0: [mem 0x000000003afff000-0x000000003affffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023f5fffff]
[    0.000000] Reserved but unavailable: 23993 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023f5fffff]
[    0.000000] On node 0 totalpages: 1546311
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 135 pages reserved
[    0.000000]   DMA zone: 3975 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3659 pages used for memmap
[    0.000000]   DMA32 zone: 234176 pages, LIFO batch:31
[    0.000000]   Normal zone: 20440 pages used for memmap
[    0.000000]   Normal zone: 1308160 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at [mem 0x3ba00000-0x3f9fffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x3a4bf000-0x3a8befff]
[    0.000000] PM: Registered nosave memory: [mem 0x3a8bf000-0x3aebefff]
[    0.000000] PM: Registered nosave memory: [mem 0x3aebf000-0x3afbefff]
[    0.000000] PM: Registered nosave memory: [mem 0x3afbf000-0x3affefff]
[    0.000000] PM: Registered nosave memory: [mem 0x3b000000-0x3f9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x3fa00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[    0.000000] e820: [mem 0x3fa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1522013
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.17-x86_64 root=UUID=2054ddaa-9484-487e-98f2-8422f6bc384e rw quiet splash
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 5917200K/6185244K available (10252K kernel code, 1296K rwdata, 3520K rodata, 1480K init, 608K bss, 268044K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 32976 entries in 129 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: (none).
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180313
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.016666] tsc: Fast TSC calibration using PIT
[    0.019999] tsc: Detected 2394.463 MHz processor
[    0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2283c8e76b3, max_idle_ns: 440795319299 ns
[    0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.46 BogoMIPS (lpj=7981543)
[    0.019999] pid_max: default: 32768 minimum: 301
[    0.030049] Security Framework initialized
[    0.030051] Yama: becoming mindful.
[    0.031241] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.033461] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.033501] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.033522] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.033753] CPU: Physical Processor ID: 0
[    0.033754] CPU: Processor Core ID: 0
[    0.033760] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.033760] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.033764] mce: CPU supports 7 MCE banks
[    0.033772] CPU0: Thermal monitoring enabled (TM1)
[    0.033781] process: using mwait in idle threads
[    0.033784] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.033785] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.033786] Spectre V2 : Mitigation: Full generic retpoline
[    0.033787] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.033787] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.033788] Speculative Store Bypass: Vulnerable
[    0.033884] Freeing SMP alternatives memory: 28K
[    0.041825] TSC deadline timer enabled
[    0.041828] smpboot: CPU0: Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.056690] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.056754] ... version:                3
[    0.056756] ... bit width:              48
[    0.056758] ... generic registers:      4
[    0.056761] ... value mask:             0000ffffffffffff
[    0.056763] ... max period:             00007fffffffffff
[    0.056765] ... fixed-purpose events:   3
[    0.056767] ... event mask:             000000070000000f
[    0.060019] Hierarchical SRCU implementation.
[    0.070307] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.073362] smp: Bringing up secondary CPUs ...
[    0.096708] x86: Booting SMP configuration:
[    0.096712] .... node  #0, CPUs:      #1 #2 #3
[    0.152785] smp: Brought up 1 node, 4 CPUs
[    0.152785] smpboot: Max logical packages: 2
[    0.152785] smpboot: Total of 4 processors activated (19163.85 BogoMIPS)
[    0.153643] devtmpfs: initialized
[    0.153643] x86/mm: Memory block size: 128MB
[    0.153947] PM: Registering ACPI NVS region [mem 0x3aebf000-0x3afbefff] (1048576 bytes)
[    0.153947] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.153947] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.153947] pinctrl core: initialized pinctrl subsystem
[    0.153947] RTC time:  6:03:23, date: 08/02/18
[    0.153947] NET: Registered protocol family 16
[    0.153947] cpuidle: using governor ladder
[    0.156691] cpuidle: using governor menu
[    0.156773] Simple Boot Flag at 0x44 set to 0x1
[    0.156799] ACPI: bus type PCI registered
[    0.156800] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.156885] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.156899] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.156899] PCI: Using configuration type 1 for base access
[    0.156899] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.157639] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.157639] ACPI: Added _OSI(Module Device)
[    0.157639] ACPI: Added _OSI(Processor Device)
[    0.157639] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.157639] ACPI: Added _OSI(Processor Aggregator Device)
[    0.157639] ACPI: Added _OSI(Linux-Dell-Video)
[    0.171624] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.175304] ACPI: Dynamic OEM Table Load:
[    0.175314] ACPI: SSDT 0xFFFFA2D4774E7000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.177088] ACPI: Dynamic OEM Table Load:
[    0.177095] ACPI: SSDT 0xFFFFA2D4776BAC00 000303 (v01 PmRef  ApIst    00003000 INTL 20120913)
[    0.177402] ACPI: Dynamic OEM Table Load:
[    0.177402] ACPI: SSDT 0xFFFFA2D4776E6A00 000119 (v01 PmRef  ApCst    00003000 INTL 20120913)
[    0.181130] ACPI: EC: EC started
[    0.181131] ACPI: EC: interrupt blocked
[    0.181591] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.181593] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.181595] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.181596] ACPI: Interpreter enabled
[    0.181625] ACPI: (supports S0 S3 S4 S5)
[    0.181626] ACPI: Using IOAPIC for interrupt routing
[    0.181660] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.182113] ACPI: Enabled 9 GPEs in block 00 to 3F
[    0.186410] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
[    0.190724] ACPI: Power Resource [FN00] (off)
[    0.190855] ACPI: Power Resource [FN01] (off)
[    0.190985] ACPI: Power Resource [FN02] (off)
[    0.191112] ACPI: Power Resource [FN03] (off)
[    0.191242] ACPI: Power Resource [FN04] (off)
[    0.192318] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.192324] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.192439] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.193231] PCI host bridge to bus 0000:00
[    0.193234] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.193236] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.193238] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.193239] pci_bus 0000:00: root bus resource [mem 0x3fa00000-0xfeafffff window]
[    0.193241] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.193250] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.193367] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.193405] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.193507] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.193518] pci 0000:00:02.0: reg 0x10: [mem 0x61000000-0x613fffff 64bit]
[    0.193524] pci 0000:00:02.0: reg 0x18: [mem 0x50000000-0x5fffffff 64bit pref]
[    0.193528] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.193540] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.193684] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.193710] pci 0000:00:14.0: reg 0x10: [mem 0x61700000-0x6170ffff 64bit]
[    0.193784] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.193887] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.193912] pci 0000:00:16.0: reg 0x10: [mem 0x61714000-0x6171400f 64bit]
[    0.193988] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.194095] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.194117] pci 0000:00:1a.0: reg 0x10: [mem 0x61719000-0x617193ff]
[    0.194204] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.194308] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.194331] pci 0000:00:1b.0: reg 0x10: [mem 0x61710000-0x61713fff 64bit]
[    0.194407] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.194511] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.194599] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.194710] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.194797] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.194912] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.194936] pci 0000:00:1d.0: reg 0x10: [mem 0x61718000-0x617183ff]
[    0.195023] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.195130] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[    0.195333] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[    0.195352] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    0.195361] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
[    0.195369] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    0.195377] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
[    0.195385] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    0.195393] pci 0000:00:1f.2: reg 0x24: [mem 0x61717000-0x617177ff]
[    0.195437] pci 0000:00:1f.2: PME# supported from D3hot
[    0.195535] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.195555] pci 0000:00:1f.3: reg 0x10: [mem 0x61715000-0x617150ff 64bit]
[    0.195576] pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
[    0.195755] pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
[    0.195770] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x4fffffff 64bit pref]
[    0.195777] pci 0000:01:00.0: reg 0x18: [mem 0x60000000-0x6001ffff 64bit]
[    0.195782] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x30ff]
[    0.195790] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.195795] pci 0000:01:00.0: enabling Extended Tags
[    0.195826] pci 0000:01:00.0: supports D1 D2
[    0.195983] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.195985] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.195988] pci 0000:00:01.0:   bridge window [mem 0x60000000-0x60ffffff]
[    0.195991] pci 0000:00:01.0:   bridge window [mem 0x40000000-0x4fffffff 64bit pref]
[    0.196072] pci 0000:07:00.0: [10ec:5289] type 00 class 0xff0000
[    0.196109] pci 0000:07:00.0: reg 0x10: [mem 0x61600000-0x6160ffff]
[    0.196291] pci 0000:07:00.0: supports D1 D2
[    0.196293] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.196405] pci 0000:07:00.2: [10ec:8168] type 00 class 0x020000
[    0.196441] pci 0000:07:00.2: reg 0x10: [io  0x2000-0x20ff]
[    0.196476] pci 0000:07:00.2: reg 0x18: [mem 0x61404000-0x61404fff 64bit pref]
[    0.196498] pci 0000:07:00.2: reg 0x20: [mem 0x61400000-0x61403fff 64bit pref]
[    0.196607] pci 0000:07:00.2: supports D1 D2
[    0.196609] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.196753] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.196758] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.196762] pci 0000:00:1c.0:   bridge window [mem 0x61600000-0x616fffff]
[    0.196768] pci 0000:00:1c.0:   bridge window [mem 0x61400000-0x614fffff 64bit pref]
[    0.196944] pci 0000:08:00.0: [8086:08b1] type 00 class 0x028000
[    0.197035] pci 0000:08:00.0: reg 0x10: [mem 0x61500000-0x61501fff 64bit]
[    0.197365] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[    0.197586] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.197592] pci 0000:00:1c.1:   bridge window [mem 0x61500000-0x615fffff]
[    0.277391] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.277478] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.277562] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.277647] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.277731] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.277814] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.277898] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.277982] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.278541] ACPI: EC: interrupt unblocked
[    0.278550] ACPI: EC: event unblocked
[    0.278557] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.278559] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.278640] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.278640] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.278640] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.278640] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.278640] pci 0000:00:02.0: vgaarb: no bridge control possible
[    0.278640] vgaarb: loaded
[    0.278640] pps_core: LinuxPPS API ver. 1 registered
[    0.278640] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.278640] PTP clock support registered
[    0.278640] EDAC MC: Ver: 3.0.0
[    0.278640] Registered efivars operations
[    0.532327] PCI: Using ACPI for IRQ routing
[    0.538979] PCI: pci_cache_line_size set to 64 bytes
[    0.539052] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[    0.539054] e820: reserve RAM buffer [mem 0x3a4bf000-0x3bffffff]
[    0.539055] e820: reserve RAM buffer [mem 0x3b000000-0x3bffffff]
[    0.539056] e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff]
[    0.539154] NetLabel: Initializing
[    0.539155] NetLabel:  domain hash size = 128
[    0.539155] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.539171] NetLabel:  unlabeled traffic allowed by default
[    0.539175] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.539175] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.542028] clocksource: Switched to clocksource tsc-early
[    0.551551] VFS: Disk quotas dquot_6.6.0
[    0.551572] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.551645] pnp: PnP ACPI init
[    0.551828] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.551831] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.551833] system 00:00: [io  0xffff] has been reserved
[    0.551834] system 00:00: [io  0xffff] has been reserved
[    0.551836] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.551838] system 00:00: [io  0x0458-0x047f] could not be reserved
[    0.551840] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.551842] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.551848] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.551876] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.551940] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.551944] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.551987] pnp 00:03: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    0.552018] pnp 00:04: Plug and Play ACPI device, IDs SYN1e76 SYN1e00 SYN0002 PNP0f13 (active)
[    0.633635] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.633637] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.633639] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.633641] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.633643] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.633644] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.633646] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.633648] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[    0.633650] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[    0.633652] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.633654] system 00:05: [mem 0x3fa00000-0x3fa00fff] has been reserved
[    0.633658] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.634194] pnp 00:06: disabling [mem 0x40000000-0x401fffff] because it overlaps 0000:00:01.0 BAR 15 [mem 0x40000000-0x4fffffff 64bit pref]
[    0.634200] pnp 00:06: disabling [mem 0x40000000-0x401fffff disabled] because it overlaps 0000:01:00.0 BAR 0 [mem 0x40000000-0x4fffffff 64bit pref]
[    0.634220] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[    0.634224] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.634373] pnp: PnP ACPI: found 7 devices
[    0.640247] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.640252] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.640280] pci 0000:01:00.0: BAR 6: assigned [mem 0x60020000-0x6003ffff pref]
[    0.640282] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.640284] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.640287] pci 0000:00:01.0:   bridge window [mem 0x60000000-0x60ffffff]
[    0.640290] pci 0000:00:01.0:   bridge window [mem 0x40000000-0x4fffffff 64bit pref]
[    0.640293] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.640297] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.640302] pci 0000:00:1c.0:   bridge window [mem 0x61600000-0x616fffff]
[    0.640306] pci 0000:00:1c.0:   bridge window [mem 0x61400000-0x614fffff 64bit pref]
[    0.640312] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.640318] pci 0000:00:1c.1:   bridge window [mem 0x61500000-0x615fffff]
[    0.640327] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.640329] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.640330] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.640332] pci_bus 0000:00: resource 7 [mem 0x3fa00000-0xfeafffff window]
[    0.640334] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.640335] pci_bus 0000:01: resource 1 [mem 0x60000000-0x60ffffff]
[    0.640337] pci_bus 0000:01: resource 2 [mem 0x40000000-0x4fffffff 64bit pref]
[    0.640339] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.640340] pci_bus 0000:07: resource 1 [mem 0x61600000-0x616fffff]
[    0.640342] pci_bus 0000:07: resource 2 [mem 0x61400000-0x614fffff 64bit pref]
[    0.640343] pci_bus 0000:08: resource 1 [mem 0x61500000-0x615fffff]
[    0.640479] NET: Registered protocol family 2
[    0.640630] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.640665] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.640796] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.640923] TCP: Hash tables configured (established 65536 bind 65536)
[    0.640968] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.640996] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.641060] NET: Registered protocol family 1
[    0.641077] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.656863] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6c6 took 13921 usecs
[    0.673530] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c6 took 16260 usecs
[    0.673565] PCI: CLS 64 bytes, default 64
[    0.673610] Unpacking initramfs...
[    0.807598] Freeing initrd memory: 9644K
[    0.807602] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.807605] software IO TLB [mem 0x31f93000-0x35f93000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.807760] Scanning for low memory corruption every 60 seconds
[    0.808335] Initialise system trusted keyrings
[    0.808344] Key type blacklist registered
[    0.808392] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.809630] zbud: loaded
[    0.809929] pstore: using lz4hc compression
[    0.810926] Key type asymmetric registered
[    0.810928] Asymmetric key parser 'x509' registered
[    0.810957] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.810989] io scheduler noop registered
[    0.810990] io scheduler deadline registered
[    0.811030] io scheduler cfq registered
[    0.811031] io scheduler mq-deadline registered
[    0.811032] io scheduler kyber registered
[    0.811037] io scheduler bfq registered
[    0.811059] io scheduler bfq-sq registered (default)
[    0.811061] BFQ I/O-scheduler: v8r12 (with cgroups support)
[    0.811082] io scheduler bfq-mq registered
[    0.811083] BFQ I/O-scheduler: v8r12 (with cgroups support)
[    0.811727] efifb: probing for efifb
[    0.811739] efifb: framebuffer at 0x50000000, using 4160k, total 4160k
[    0.811740] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    0.811740] efifb: scrolling: redraw
[    0.811742] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.814320] Console: switching to colour frame buffer device 170x48
[    0.816663] fb0: EFI VGA frame buffer device
[    0.816691] intel_idle: MWAIT substates: 0x21120
[    0.816692] intel_idle: v0.4.1 model 0x2A
[    0.816849] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.816894] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[    0.816906] ACPI: Power Button [PWRB]
[    0.816960] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.816972] ACPI: Lid Switch [LID0]
[    0.817007] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.817015] ACPI: Power Button [PWRF]
[    0.818130] thermal LNXTHERM:00: registered as thermal_zone0
[    0.818131] ACPI: Thermal Zone [TZ00] (48 C)
[    0.818565] thermal LNXTHERM:01: registered as thermal_zone1
[    0.818567] ACPI: Thermal Zone [TZ01] (48 C)
[    0.818665] thermal LNXTHERM:02: registered as thermal_zone2
[    0.818666] ACPI: Thermal Zone [TZ02] (28 C)
[    0.818838] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.819819] intel_pstate: Intel P-state driver initializing
[    0.819995] ledtrig-cpu: registered to indicate activity on CPUs
[    0.820870] NET: Registered protocol family 10
[    0.833147] Segment Routing with IPv6
[    0.833214] NET: Registered protocol family 17
[    0.833940] RAS: Correctable Errors collector initialized.
[    0.833999] microcode: sig=0x206a7, pf=0x10, revision=0x2d
[    0.834268] microcode: Microcode Update Driver: v2.2.
[    0.834308] sched_clock: Marking stable (834239214, 0)->(840027152, -5787938)
[    0.834701] registered taskstats version 1
[    0.834719] Loading compiled-in X.509 certificates
[    0.834747] zswap: loaded using pool lzo/zbud
[    0.843837] Key type big_key registered
[    0.844404]   Magic number: 14:308:63
[    0.844559] hctosys: unable to open rtc device (rtc0)
[    0.848301] Freeing unused kernel memory: 1480K
[    0.848303] Write protecting the kernel read-only data: 16384k
[    0.848839] Freeing unused kernel memory: 2016K
[    0.850166] Freeing unused kernel memory: 576K
[    1.447399] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.485142] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.485203] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.485439] SCSI subsystem initialized
[    1.489950] ACPI: bus type USB registered
[    1.489973] usbcore: registered new interface driver usbfs
[    1.489981] usbcore: registered new interface driver hub
[    1.490026] usbcore: registered new device driver usb
[    1.493007] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.493316] ehci-pci: EHCI PCI platform driver
[    1.493538] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.493547] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.493567] ehci-pci 0000:00:1a.0: debug port 2
[    1.496924] libata version 3.00 loaded.
[    1.497476] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.497501] ehci-pci 0000:00:1a.0: irq 16, io mem 0x61719000
[    1.510100] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.510216] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    1.510219] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.510221] usb usb1: Product: EHCI Host Controller
[    1.510223] usb usb1: Manufacturer: Linux 4.17.11-2-MANJARO ehci_hcd
[    1.510225] usb usb1: SerialNumber: 0000:00:1a.0
[    1.510476] hub 1-0:1.0: USB hub found
[    1.510490] hub 1-0:1.0: 2 ports detected
[    1.510999] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.511006] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.511021] ehci-pci 0000:00:1d.0: debug port 2
[    1.514929] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.514947] ehci-pci 0000:00:1d.0: irq 20, io mem 0x61718000
[    1.526772] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.526898] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    1.526901] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.526904] usb usb2: Product: EHCI Host Controller
[    1.526907] usb usb2: Manufacturer: Linux 4.17.11-2-MANJARO ehci_hcd
[    1.526909] usb usb2: SerialNumber: 0000:00:1d.0
[    1.527290] hub 2-0:1.0: USB hub found
[    1.527306] hub 2-0:1.0: 2 ports detected
[    1.527890] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.527910] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.528994] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[    1.529004] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.529234] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    1.529238] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.529241] usb usb3: Product: xHCI Host Controller
[    1.529244] usb usb3: Manufacturer: Linux 4.17.11-2-MANJARO xhci-hcd
[    1.529247] usb usb3: SerialNumber: 0000:00:14.0
[    1.529470] hub 3-0:1.0: USB hub found
[    1.529489] hub 3-0:1.0: 4 ports detected
[    1.530518] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.530525] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.530530] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    1.530602] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
[    1.530606] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.530608] usb usb4: Product: xHCI Host Controller
[    1.530611] usb usb4: Manufacturer: Linux 4.17.11-2-MANJARO xhci-hcd
[    1.530622] usb usb4: SerialNumber: 0000:00:14.0
[    1.530886] hub 4-0:1.0: USB hub found
[    1.530903] hub 4-0:1.0: 4 ports detected
[    1.531721] ahci 0000:00:1f.2: version 3.0
[    1.541294] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.544597] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl RAID mode
[    1.544605] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.564810] scsi host0: ahci
[    1.565356] scsi host1: ahci
[    1.565738] scsi host2: ahci
[    1.566047] scsi host3: ahci
[    1.566341] scsi host4: ahci
[    1.566512] scsi host5: ahci
[    1.566584] ata1: SATA max UDMA/133 abar m2048@0x61717000 port 0x61717100 irq 26
[    1.566589] ata2: SATA max UDMA/133 abar m2048@0x61717000 port 0x61717180 irq 26
[    1.566592] ata3: SATA max UDMA/133 abar m2048@0x61717000 port 0x61717200 irq 26
[    1.566593] ata4: DUMMY
[    1.566595] ata5: DUMMY
[    1.566596] ata6: DUMMY
[    1.810058] tsc: Refined TSC clocksource calibration: 2394.559 MHz
[    1.810085] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2284235ba97, max_idle_ns: 440795203400 ns
[    1.810156] clocksource: Switched to clocksource tsc
[    1.840113] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.856773] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.860106] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[    1.881009] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.881058] ata2: SATA link down (SStatus 0 SControl 300)
[    1.881109] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.882979] ata3.00: ATAPI: hp      DVD RAM UJ8C2, 1.00, max UDMA/133
[    1.886429] ata3.00: configured for UDMA/133
[    1.892713] ata1.00: ATA-8: WDC WD7500BPKX-22HPJT0, 01.01A01, max UDMA/133
[    1.892720] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.897145] ata1.00: configured for UDMA/133
[    1.897660] scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500BPKX-2 1A01 PQ: 0 ANSI: 5
[    1.900057] scsi 2:0:0:0: CD-ROM            hp       DVD RAM UJ8C2    1.00 PQ: 0 ANSI: 5
[    1.960340] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[    1.960344] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.960365] sd 0:0:0:0: [sda] Write Protect is off
[    1.960368] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.960415] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.987557] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.987566] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.988165] hub 1-1:1.0: USB hub found
[    1.988320] hub 1-1:1.0: 6 ports detected
[    2.004063] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    2.004071] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.004701] hub 2-1:1.0: USB hub found
[    2.004871] hub 2-1:1.0: 8 ports detected
[    2.006958] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.006965] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.007485] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.009034] usb 3-2: New USB device found, idVendor=04d9, idProduct=0461, bcdDevice= 1.00
[    2.009042] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.011321]  sda: sda1 sda2 sda3 sda4
[    2.011817] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.011898] hidraw: raw HID events driver (C) Jiri Kosina
[    2.021691] usbcore: registered new interface driver usbhid
[    2.021693] usbhid: USB HID core driver
[    2.023070] input: HID 04d9:0461 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:04D9:0461.0001/input/input5
[    2.023147] hid-generic 0003:04D9:0461.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0461] on usb-0000:00:14.0-2/input0
[    2.133504] usb 3-4: new full-speed USB device number 3 using xhci_hcd
[    2.266707] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    2.274968] usb 3-4: New USB device found, idVendor=138a, idProduct=0018, bcdDevice= 0.78
[    2.274977] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.274981] usb 3-4: SerialNumber: 47163a54f0d0
[    2.422102] usb 1-1.1: New USB device found, idVendor=064e, idProduct=c33c, bcdDevice= 2.01
[    2.422112] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.422117] usb 1-1.1: Product: HP Truevision HD
[    2.422121] usb 1-1.1: Manufacturer: SuYin
[    2.422125] usb 1-1.1: SerialNumber: HF1019-P62A-OV03-REV0201
[    2.477406] random: fast init done
[    2.566785] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[    2.665970] usb 1-1.3: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.00
[    2.665977] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.851151] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.090535] random: crng init done
[    4.317636] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    4.333892] systemd[1]: Detected architecture x86-64.
[    4.350570] systemd[1]: Set hostname to <manjaro>.
[    6.919306] systemd[1]: Reached target Login Prompts.
[    6.937045] systemd[1]: Listening on Process Core Dump Socket.
[    6.937097] systemd[1]: Reached target Remote File Systems.
[    6.949545] systemd[1]: Listening on udev Control Socket.
[    6.951926] systemd[1]: Created slice User and Session Slice.
[    6.952062] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.959470] systemd[1]: Listening on LVM2 poll daemon socket.
[    7.390807] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    7.390856] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    7.615523] EXT4-fs (sda2): re-mounted. Opts: (null)
[    7.768789] systemd-journald[242]: Received request to flush runtime journal from PID 1
[    9.418903] input: HP Wireless hotkeys as /devices/virtual/input/input6
[    9.825337] hp_accel: laptop model unknown, using default axes configuration
[    9.846212] lis3lv02d: 8 bits 3DC sensor found
[    9.919541] rtc_cmos 00:01: RTC can wake from S4
[    9.919562] rtc_cmos: probe of 00:01 failed with error -16
[    9.920103] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[    9.947506] ACPI: AC Adapter [ACAD] (on-line)
[   10.035078] wmi_bus wmi_bus-PNP0C14:00: WQBJ data block query control method not found
[   10.149573] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   10.220245] [Firmware Bug]: battery: (dis)charge rate invalid.
[   10.220388] ACPI: Battery Slot [BAT1] (battery present)
[   10.258120] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.245280] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   11.248901] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   11.604115] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   11.604117] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   11.604119] RAPL PMU: hw unit of domain package 2^-16 Joules
[   11.604120] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   11.634124] cryptd: max_cpu_qlen set to 1000
[   11.844378] psmouse serio1: synaptics: queried max coordinates: x [..5684], y [..4862]
[   11.948766] psmouse serio1: synaptics: queried min coordinates: x [1258..], y [992..]
[   11.948773] psmouse serio1: synaptics: Your touchpad (PNP: SYN1e76 SYN1e00 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[   12.048699] Linux agpgart interface v0.103
[   12.179462] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x26c00/0x0, board id: 2054, fw id: 1196324
[   12.304585] Adding 7166972k swap on /dev/sda4.  Priority:-2 extents:1 across:7166972k FS
[   12.323514] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   12.572220] intel_pstate: Turbo disabled by BIOS or unavailable on processor
[   12.621903] gpio_ich: GPIO from 436 to 511 on gpio_ich
[   12.803810] mousedev: PS/2 mouse device common for all mice
[   12.890889] Intel(R) Wireless WiFi driver for Linux
[   12.890892] Copyright(c) 2003- 2015 Intel Corporation
[   12.932049] iwlwifi 0000:08:00.0: loaded firmware version 17.948900127.0 op_mode iwlmvm
[   13.080272] [drm] radeon kernel modesetting enabled.
[   13.080292] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[   13.080444] ATPX version 1, functions 0x00000033
[   13.080617] checking generic (50000000 410000) vs hw (40000000 10000000)
[   13.080676] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[   13.080926] [drm] initializing kernel modesetting (TURKS 0x1002:0x6840 0x103C:0x18A5 0x00).
[   13.122639] ATOM BIOS: HP/Compal
[   13.122749] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[   13.122752] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[   13.122762] [drm] Detected VRAM RAM=2048M, BAR=256M
[   13.122764] [drm] RAM width 128bits DDR
[   13.137751] iwlwifi 0000:08:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[   13.140057] [TTM] Zone  kernel: Available graphics memory: 3000152 kiB
[   13.140059] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   13.140061] [TTM] Initializing pool allocator
[   13.140067] [TTM] Initializing DMA pool allocator
[   13.140094] [drm] radeon: 2048M of VRAM memory ready
[   13.140095] [drm] radeon: 1024M of GTT memory ready.
[   13.140109] [drm] Loading TURKS Microcode
[   13.155830] iwlwifi 0000:08:00.0: base HW address: 00:15:00:ba:6c:97
[   13.198522] checking generic (50000000 410000) vs hw (50000000 10000000)
[   13.198525] fb: switching to inteldrmfb from EFI VGA
[   13.198552] Console: switching to colour dummy device 80x25
[   13.198661] [drm] Replacing VGA console driver
[   13.199685] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   13.199686] [drm] Driver supports precise vblank timestamp query.
[   13.200428] vga_switcheroo: enabled
[   13.200779] radeon 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[   13.200782] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[   13.212518] media: Linux media interface: v0.10
[   13.283104] [drm] Internal thermal controller with fan control
[   13.288232] [drm] radeon: dpm initialized
[   13.301416] hp_wmi: query 0xd returned error 0x5
[   13.301574] input: HP WMI hotkeys as /devices/virtual/input/input9
[   13.315307] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   13.317155] [drm] PCIE gen 2 link speeds already enabled
[   13.328032] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[   13.328131] radeon 0000:01:00.0: WB enabled
[   13.328134] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000ddcc8d13
[   13.328136] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000870d53ae
[   13.328415] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x00000000b88a6754
[   13.328417] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   13.328418] [drm] Driver supports precise vblank timestamp query.
[   13.328419] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[   13.328463] radeon 0000:01:00.0: radeon: using MSI.
[   13.328500] [drm] radeon: irq initialized.
[   13.344968] [drm] ring test on 0 succeeded in 1 usecs
[   13.344976] [drm] ring test on 3 succeeded in 3 usecs
[   13.378675] Bluetooth: Core ver 2.22
[   13.378699] NET: Registered protocol family 31
[   13.378700] Bluetooth: HCI device and connection manager initialized
[   13.378705] Bluetooth: HCI socket layer initialized
[   13.378710] Bluetooth: L2CAP socket layer initialized
[   13.378725] Bluetooth: SCO socket layer initialized
[   13.392950] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   13.396503] intel_rapl: Found RAPL domain package
[   13.396505] intel_rapl: Found RAPL domain core
[   13.396506] intel_rapl: Found RAPL domain uncore
[   13.396511] intel_rapl: RAPL package 0 domain package locked by BIOS
[   13.438880] Linux video capture interface: v2.00
[   13.479794] usbcore: registered new interface driver btusb
[   13.496736] Bluetooth: hci0: read Intel version: 370710018001290c00
[   13.525038] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.7.10-fw-1.80.1.29.c.bseq failed with error -2
[   13.525043] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.7.10-fw-1.80.1.29.c.bseq(-2)
[   13.531747] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.bseq
[   13.532121] [drm] ring test on 5 succeeded in 1 usecs
[   13.532126] [drm] UVD initialized successfully.
[   13.532337] [drm] ib test on ring 0 succeeded in 0 usecs
[   13.532432] [drm] ib test on ring 3 succeeded in 0 usecs
[   13.535729] Bluetooth: hci0: Intel firmware patch completed
[   13.681265] loop: module loaded
[   13.892225] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   14.210097] [drm] ib test on ring 5 succeeded
[   14.216142] [drm] Radeon Display Connectors
[   14.224964] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[   14.225822] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 1
[   14.226260] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   14.232243] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[   14.233606] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:37/LNXVIDEO:00/input/input10
[   14.233762] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[   14.235155] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   14.240140] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input11
[   14.240349] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   14.252582] fbcon: inteldrmfb (fb0) is primary device
[   14.252680] Console: switching to colour frame buffer device 170x48
[   14.252694] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   14.392849] uvcvideo: Found UVC 1.00 device HP Truevision HD (064e:c33c)
[   14.415198] uvcvideo 1-1.1:1.0: Entity type for entity Extension 4 was not initialized!
[   14.415204] uvcvideo 1-1.1:1.0: Entity type for entity Extension 3 was not initialized!
[   14.415207] uvcvideo 1-1.1:1.0: Entity type for entity Processing 2 was not initialized!
[   14.415211] uvcvideo 1-1.1:1.0: Entity type for entity Camera 1 was not initialized!
[   14.415337] input: HP Truevision HD: HP Truevision as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input12
[   14.415484] usbcore: registered new interface driver uvcvideo
[   14.415486] USB Video Class driver (1.1.1)
[   14.654367] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD91BXX: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   14.654370] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.654372] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[   14.654373] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   14.654374] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   14.654376] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x11
[   14.654378] snd_hda_codec_idt hdaudioC0D0:      Mic=0xa
[   15.204758] Bluetooth: hci0: last event is not cmd complete (0x0f)
[   15.204902] Bluetooth: hci0: turning off Intel device LED failed (-56)
[   15.307792] iwlwifi 0000:08:00.0 wlp8s0: renamed from wlan0
[   15.319140] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   15.319650] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   15.319879] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   15.319937] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   15.455005] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   27.128683] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   27.128686] Bluetooth: BNEP filters: protocol multicast
[   27.128691] Bluetooth: BNEP socket layer initialized
[   29.763722] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[   30.000350] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[   30.245681] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[   31.514775] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[   34.869804] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[   38.255582] wlp8s0: authenticate with 90:4d:4a:c2:5f:b6
[   38.259265] wlp8s0: send auth to 90:4d:4a:c2:5f:b6 (try 1/3)
[   38.261936] wlp8s0: authenticated
[   38.263420] wlp8s0: associate with 90:4d:4a:c2:5f:b6 (try 1/3)
[   38.267075] wlp8s0: RX AssocResp from 90:4d:4a:c2:5f:b6 (capab=0x411 status=0 aid=3)
[   38.268739] wlp8s0: associated
[   38.699438] IPv6: ADDRCONF(NETDEV_CHANGE): wlp8s0: link becomes ready
[   39.420737] intel_pstate: Turbo disabled by BIOS or unavailable on processor
[   39.594401] fuse init (API version 7.26)
[   72.965038] Bluetooth: RFCOMM TTY layer initialized
[   72.965059] Bluetooth: RFCOMM socket layer initialized
[   72.965074] Bluetooth: RFCOMM ver 1.11
[   80.700939] [UFW BLOCK] IN=wlp8s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[  122.999555] [UFW BLOCK] IN=wlp8s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.3 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=35519 PROTO=2 
[  149.000646] [UFW BLOCK] IN=wlp8s0 OUT= MAC=01:00:5e:00:00:fb:90:4d:4a:c2:5f:b6:08:00 SRC=10.1.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[  205.729745] [UFW BLOCK] IN=wlp8s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[  269.012487] [UFW BLOCK] IN=wlp8s0 OUT= MAC=01:00:5e:00:00:fb:90:4d:4a:c2:5f:b6:08:00 SRC=10.1.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[  306.415329] [UFW BLOCK] IN=wlp8s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.3 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9898 PROTO=2 
[  330.759342] [UFW BLOCK] IN=wlp8s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[  389.024424] [UFW BLOCK] IN=wlp8s0 OUT= MAC=01:00:5e:00:00:fb:90:4d:4a:c2:5f:b6:08:00 SRC=10.1.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[  438.588249] [UFW BLOCK] IN=wlp8s0 OUT= MAC=33:33:00:00:00:01:00:19:d2:bf:87:bd:86:dd SRC=2a02:a03f:46c0:5900:2052:fc98:daf6:ac84 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=150542 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[  438.589521] [UFW BLOCK] IN=wlp8s0 OUT= MAC=33:33:00:00:00:01:00:19:d2:bf:87:bd:86:dd SRC=2a02:a03f:46c0:5900:2052:fc98:daf6:ac84 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=360773 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[  438.590687] [UFW BLOCK] IN=wlp8s0 OUT= MAC=33:33:00:00:00:01:00:19:d2:bf:87:bd:86:dd SRC=2a02:a03f:46c0:5900:ea1d:cefc:ca16:72fe DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=1016954 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[  438.591921] [UFW BLOCK] IN=wlp8s0 OUT= MAC=33:33:00:00:00:01:00:19:d2:bf:87:bd:86:dd SRC=2a02:a03f:46c0:5900:ea1d:cefc:ca16:72fe DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=443483 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[  438.593181] [UFW BLOCK] IN=wlp8s0 OUT= MAC=33:33:00:00:00:01:00:19:d2:bf:87:bd:86:dd SRC=fe80:0000:0000:0000:8000:c549:9513:d495 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=388358 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[  438.594428] [UFW BLOCK] IN=wlp8s0 OUT= MAC=33:33:00:00:00:01:00:19:d2:bf:87:bd:86:dd SRC=fe80:0000:0000:0000:8000:c549:9513:d495 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=186847 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[  438.597985] [UFW BLOCK] IN=wlp8s0 OUT= MAC=33:33:00:00:00:01:00:19:d2:bf:87:bd:86:dd SRC=2a02:a03f:46c0:5900:2052:fc98:daf6:ac84 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=150542 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[  438.599217] [UFW BLOCK] IN=wlp8s0 OUT= MAC=33:33:00:00:00:01:00:19:d2:bf:87:bd:86:dd SRC=2a02:a03f:46c0:5900:2052:fc98:daf6:ac84 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=360773 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[  438.600428] [UFW BLOCK] IN=wlp8s0 OUT= MAC=33:33:00:00:00:01:00:19:d2:bf:87:bd:86:dd SRC=2a02:a03f:46c0:5900:ea1d:cefc:ca16:72fe DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=1016954 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[  438.601740] [UFW BLOCK] IN=wlp8s0 OUT= MAC=33:33:00:00:00:01:00:19:d2:bf:87:bd:86:dd SRC=2a02:a03f:46c0:5900:ea1d:cefc:ca16:72fe DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=443483 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[  458.041153] [UFW BLOCK] IN=wlp8s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[  488.220274] [UFW BLOCK] IN=wlp8s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.3 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=43627 PROTO=2 
[  508.933592] [UFW BLOCK] IN=wlp8s0 OUT= MAC=01:00:5e:00:00:fb:90:4d:4a:c2:5f:b6:08:00 SRC=10.1.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 

Démarrage un peu lent

#2Messageil y a 2 mois

Salut nam ;)

Déjà, ton Bluetooth est-il nécessaire ?

Puis, pourquoi le parefeu ufw met-il autant de temps à répondre qu'il bloque l'adresse Mac de la connexion wlp8s0 ?

Pour cette ligne :

[   14.226260] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
J'ai vu qu'il y avait un signalement de bug mais pour Ubuntu et qui date de 2013 :

https://bugs.launchpad.net/fwts/+bug/1249978

Maintenant, je ne sais si ça a pu t'aider... un peu :gsourire:

Démarrage un peu lent

#3Messageil y a 2 mois

Bonjour.
3min 31.465s updatedb.service
1min 46.252s man-db.service

Essaye de faire un sudo updatedb . Ça actualisera la base de mlocate. Celle-ci se fait par un timer de systemd par défaut chaque jour à minuit.
Si le PC est éteint à ce moment, le service se lance au boot suivant et si il y a du retard, ça peut pendre du temps.

systemctl status updatedb.timer
● updatedb.timer - Daily locate database update
   Loaded: loaded (/usr/lib/systemd/system/updatedb.timer; static; vendor prese>
   Active: active (waiting) since Thu 2018-08-02 08:44:41 CEST; 33min ago
  Trigger: Fri 2018-08-03 00:00:00 CEST; 14h left

août 02 08:44:41 steph-tour systemd[1]: Started Daily locate database update.
Apparemment, il n'est pas trop conseillé de modifier ce timer, mais si ton PC n'est jamais utilisé à minuit, lance la commande manuellement avant d'éteindre pour voir.

Démarrage un peu lent

#4Messageil y a 2 mois

tu peux arrêter ces 2 services

sudo systemctl disable  ModemManager.service
sudo systemctl disable  lvm2-monitor.service

Démarrage un peu lent

#5Messageil y a 2 mois

...alors, déjà, super merci pour vos réponses ! :)

@obelix1502 : Je croyais avoir désactivé bluetooth et quand je passe par les paramètres, ça me dit que c'est désactivé.
Sinon, mon ordi est un HP, pas un Dell et à priori je ne suis plus du tout sous les kernels de l'époque (mais en 2013 il était bien sous Xubuntu)
@lemust83 : effectivement ce updatedb prend une plombe !!! Est-ce normal ?
@stephane : les deux services sont désactivés

Je redémarre et vous dit quoi.

~]$ systemd-analyze blame
         15.460s systemd-journal-flush.service
         12.007s NetworkManager-wait-online.service
          9.825s upower.service
          7.036s lvm2-monitor.service
          6.734s plymouth-start.service
          5.876s udisks2.service
          4.260s snapd.service
          4.184s ufw.service
          3.992s dev-sda2.device
          3.910s org.cups.cupsd.service
          3.902s lightdm-plymouth.service
          3.890s plymouth-quit-wait.service
          2.888s accounts-daemon.service
          2.031s NetworkManager.service
          1.978s systemd-modules-load.service
          1.843s colord.service
          1.842s polkit.service
          1.800s systemd-fsck@dev-disk-by\x2duuid-CFA2\x2d5004.service
          1.525s systemd-fsck@dev-disk-by\x2duuid-61941982\x2d3c0d\x2d46ef\x2db>
          1.284s bluetooth.service
          1.164s avahi-daemon.service
           989ms systemd-logind.service
           797ms systemd-udevd.service
Il y a un net mieux mais c'est encore plon plon.
..et je ne pige pas tout sur l'histoire du bluetooth ! ;)

Démarrage un peu lent

#6Messageil y a 2 mois

Salut,
lemust83 a écrit :
il y a 2 mois
Essaye de faire un sudo updatedb . Ça actualisera la base de mlocate. Celle-ci se fait par un timer de systemd par défaut chaque jour à minuit.
Si le PC est éteint à ce moment, le service se lance au boot suivant et si il y a du retard, ça peut pendre du temps.

Apparemment, il n'est pas trop conseillé de modifier ce timer, mais si ton PC n'est jamais utilisé à minuit, lance la commande manuellement avant d'éteindre pour voir.
On peut modifier les timers par des fichiers de configuration personnalisés, qui permettent de choisir l'heure, mais aussi de retarder les actions au boot, par exemple :

cat /etc/systemd/system/man-db.timer.d/man-db.timer.conf
[Timer]
OnCalender=
OnCalendar=19:00
OnBootSec=120
La mise à jour de la BDD man démarre à 19:00 si le PC est allumé ou 2 minutes après le boot.

cat /etc/systemd/system/updatedb.timer.d/updatedb.timer.conf
[Timer]
OnCalender=
OnCalendar=19:10
OnBootSec=240
et 19:10 pour la BDD de locate ou 4 minutes après le boot.

Démarrage un peu lent

#7Messageil y a 2 mois

A noter qu'il y a des commandes spécifiques pour voir les fichiers et surtout pour les éditer

systemctl cat man-db.timer

sudo systemctl edit man-db.timer
cette commande "edit" ne modifie pas le fichier original mais crée automatiquement un fichier de surcharge

Démarrage un peu lent

#8Messageil y a 2 mois

:salut: Intéressant tout ça... je tombe sur le sujet en cherchant pourquoi, même en vidant le cache de mon navigateur, après avoir supprimé l'historique etc. mes recherches duckduck ou autres sont pipées et me renvoient à des renseignements concernant mon modèle de voiture par ex., pour lesquels je pensais avoir supprimé toute trace afin d'avoir des résultats différents...
Alors la question du cache dns se pose, comment les moteurs de recherches qui prétendent ne pas garder l'historique de mes recherches me renvoient à des résultats que "sans" ils ne pourraient me sortir? Un service démarré à mon insu?
Un petit " systemd-analyze blame" me renvoie 44 résultats...

$ systemd-analyze blame
          2.851s lvm2-monitor.service
          2.474s dev-sda3.device
          1.933s tlp.service
          1.374s avahi-daemon.service
          1.365s NetworkManager.service
          1.214s polkit.service
          1.192s systemd-logind.service
          1.084s ldconfig.service
          1.059s alsa-restore.service
           999ms systemd-journal-flush.service
           916ms accounts-daemon.service
           893ms ufw.service
           815ms systemd-udevd.service
           769ms udisks2.service
           681ms systemd-udev-trigger.service
           603ms systemd-journald.service
           386ms upower.service
           374ms systemd-modules-load.service
           261ms systemd-binfmt.service
           253ms systemd-sysusers.service
           240ms sys-kernel-debug.mount
           230ms dev-hugepages.mount
           227ms systemd-tmpfiles-setup.service
           225ms user@1005.service
           222ms systemd-remount-fs.service
           222ms kmod-static-nodes.service
           191ms dev-mqueue.mount
           190ms dev-disk-by\x2duuid-0c82b02d\x2db471\x2d430e\x2d89e6\x2d5c1c5e>
           167ms wpa_supplicant.service
           163ms lightdm.service
           145ms systemd-random-seed.service
           129ms systemd-journal-catalog-update.service
           113ms systemd-tmpfiles-setup-dev.service
           108ms proc-sys-fs-binfmt_misc.mount
            91ms systemd-tmpfiles-clean.service
            91ms systemd-update-utmp.service
            90ms sys-kernel-config.mount
            74ms systemd-sysctl.service
            66ms systemd-rfkill.service
            63ms systemd-user-sessions.service
            54ms systemd-update-done.service
            52ms rtkit-daemon.service
            46ms sys-fs-fuse-connections.mount
            22ms tmp.mount
si certains vous paraissent louches...

Démarrage un peu lent

#9Messageil y a 2 mois

:salut:
aucune idée de ce que signifie pour toi "louche" - tu peux sans doute te passer de lvm si tu n'utilises pas ce type de partitions...
Il est possible de faire un systemctl cat ********** si l'on désire plus d'infos sur un service "louche"

Ce qui prend du temps, sont des services disque (dur) et connexion réseau
Certains services (lancés une fois par jour /semaine / mois) peuvent êtres long (updatedb, mandb, ...), rien d'alarmant.

Pour rappel, ces taches sont lancées "presque" en parallèle ; donc supprimer un service de 5 secondes ne va pas obligatoirement rendre le boot plus rapide de 5 secondes
------
Un petit script qui affiche le même résultat mais avec une description (si cela peut aider...)

#!/usr/bin/env bash
# fichier avec droits en exécution : systemd-analyze-blame
declare -i i=0
while IFS=$' \n' read -r a b c; do
    if [[ -z "$c" ]]; then
        temps="$a"
        service="$b"
    else
        temps="$a $b"
        service="$c"    
    fi
    desc=$(systemctl show "$service" | grep "^Description")
    printf "%-13s \t%-36s \t (%s)\n" "$temps" "$service" "${desc##*=}"
    ((++i))
done < <(systemd-analyze blame)
echo -e "\n$i tâches systemd au boot"
Cela donne comme retour:

...
7.908s        	dev-sda10.device                     	 (ST2000VX000-1CU164 PLASMA5)
70ms          	kmod-static-nodes.service            	 (Create list of required static device nodes for the current kernel)
63ms          	sys-kernel-config.mount              	 (Kernel Configuration File System)
47ms          	systemd-tmpfiles-clean.service       	 (Cleanup of Temporary Directories)
45ms          	systemd-user-sessions.service        	 (Permit User Sessions)
13ms          	alsa-restore.service                 	 (Save/Restore Sound Card State)
5ms           	ntpd.service                         	 (Network Time Service)

44 tâches systemd au boot

Démarrage un peu lent

#10Messageil y a 2 mois

:bjr: papajoke :bien pour le script, je vais m'en faire un aliass qui pointe vers lui... merci!
Par contre, ce qui me semble louche ("comment les moteurs de recherches qui prétendent ne pas garder l'historique de mes recherches me renvoient à des résultats que "sans" ils ne pourraient me sortir?" de mon précédent post) pourrait être un service démarré à mon insu, non?
Cela dit je n'ai pas de problème de lenteur, hormis ceux liés à l'âge de la machine (2005... ), ce qui me fait sortir du fil... :pappy:

Démarrage un peu lent

#11Messageil y a 2 mois

Chez moi, il y a du mieux, mais ça reste nettement au dessus de la minute, et il y a toujours ce message curieux de UFW (j'ai le même sur un ordi voisin sous xubuntu : n'aimeraient ils pas ma box ?

[   15.646293] intel_rapl: RAPL package 0 domain package locked by BIOS
[   24.453579] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   24.453585] Bluetooth: BNEP filters: protocol multicast
[   24.453596] Bluetooth: BNEP socket layer initialized
[   27.099097] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[   27.356324] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[   27.627614] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[   28.642850] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[   31.986062] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[   35.484361] wlp8s0: authenticate with 90:4d:4a:c2:5f:b6
[   35.486939] wlp8s0: send auth to 90:4d:4a:c2:5f:b6 (try 1/3)
[   35.489328] wlp8s0: authenticated
[   35.490016] wlp8s0: associate with 90:4d:4a:c2:5f:b6 (try 1/3)
[   35.493805] wlp8s0: RX AssocResp from 90:4d:4a:c2:5f:b6 (capab=0x411 status=0 aid=3)
[   35.500788] wlp8s0: associated
[   35.583917] IPv6: ADDRCONF(NETDEV_CHANGE): wlp8s0: link becomes ready
[   36.266857] intel_pstate: Turbo disabled by BIOS or unavailable on processor
[   37.508281] fuse init (API version 7.26)
[   48.273542] [UFW BLOCK] IN=wlp8s0 OUT= MAC=01:00:5e:00:00:fb:2c:f0:a2:d2:04:a2:08:00 SRC=192.168.1.3 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=17390 PROTO=2 
[   71.235863] Bluetooth: RFCOMM TTY layer initialized
[   71.235876] Bluetooth: RFCOMM socket layer initialized
[   71.235891] Bluetooth: RFCOMM ver 1.11
[   76.865563] [UFW BLOCK] IN=wlp8s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
Virer Bluetooth n'est pas si simple :

~]$ sudo pacman -Rs bluez 
vérification des dépendances…
erreur : la préparation de la transaction a échoué (la satisfaction des dépendances a échoué)
:: blueman : supprimer bluez casse la dépendance « bluez »
:: gnome-bluetooth : supprimer bluez casse la dépendance « bluez »
:: pulseaudio-bluetooth : supprimer bluez casse la dépendance « bluez »

sudo pacman -Rs bluez blueman pulseaudio-bluetooth gnome-bluetooth
vérification des dépendances…
erreur : la préparation de la transaction a échoué (la satisfaction des dépendances a échoué)
:: gnome-shell : supprimer gnome-bluetooth casse la dépendance « gnome-bluetooth »
Je tente :

sudo -H gedit /etc/modprobe.d/blacklist.conf
et ajoutant :

install bluetooth /bin/false 
[Edit] Du mieux !

[   27.171539] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[   27.411475] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[   27.664811] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[   29.592835] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[   32.887188] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[   36.324705] wlp8s0: authenticate with 90:4d:4a:c2:5f:b6
[   36.327340] wlp8s0: send auth to 90:4d:4a:c2:5f:b6 (try 1/3)
[   36.329550] wlp8s0: authenticated
[   36.330020] wlp8s0: associate with 90:4d:4a:c2:5f:b6 (try 1/3)
[   36.333745] wlp8s0: RX AssocResp from 90:4d:4a:c2:5f:b6 (capab=0x411 status=0 aid=3)
[   36.339035] wlp8s0: associated
[   36.469969] IPv6: ADDRCONF(NETDEV_CHANGE): wlp8s0: link becomes ready
[   36.958573] intel_pstate: Turbo disabled by BIOS or unavailable on processor
[   38.233460] fuse init (API version 7.26)
[   57.870823] [UFW BLOCK] IN=wlp8s0 OUT= MAC=01:00:5e:00:00:01:90:4d:4a:c2:5f:b3:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
[   66.472511] [UFW BLOCK] IN=wlp8s0 OUT= MAC=01:00:5e:00:00:fb:90:4d:4a:c2:5f:b6:08:00 SRC=10.1.1.1 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
Il reste la bagarre de UFW (j'ai la même sur un autre ordi avec Xubuntu : ma box se chamaillerait-elle avec UFW ?)

Démarrage un peu lent

#12Messageil y a 2 mois

:bjr: Comme précisé plus haut par papajoke, les services démarrent en parallèle, inutile donc de désactiver un service qui, au final ne changera strictement rien au temps de boot. Les seuls qui plombent le temps de démarrage et qu'il faut, non pas désactiver, mais dont la séquence doit être absolument décalée, sont les timers des updates. Ceci fait, le gain est très sensiblement perceptible. J'avoue que je ne comprends pas trop pourquoi ces deux services chronophages sont lancés par défaut au démarrage. :confus:

# /usr/lib/systemd/system/man-db.timer
[Unit]
Description=Daily man-db cache update

[Timer]
OnCalendar=daily
AccuracySec=1d
Persistent=true

# /etc/systemd/system/man-db.timer.d/override.conf
[Timer]
OnCalendar=
OnCalendar=12:00
OnBootSec=480

# /usr/lib/systemd/system/updatedb.timer
[Unit]
Description=Daily locate database update

[Timer]
OnCalendar=daily
AccuracySec=12h
Persistent=true

# /etc/systemd/system/updatedb.timer.d/override.conf
[Timer]
OnCalendar=
OnCalendar=12:10
OnBootSec=300
ps : De mémoire, les autres distros Linux, avant systemd, déclenchaient les updates après le boot et c'était quand même vachement bien... :siffle

Démarrage un peu lent

#13Messageil y a 2 mois

Les timers ne sont pas lancés au petit matin mais si on n'indique pas d'heure (cas par défaut) ils sont lancé à minuit.
Avec persistent=true, si le pc est éteint, alors ils sont lancés au prochain démarrage.

Donc si l'on précise une heure "de travail", il y a des chances qu'il ne soit pas lancé au boot...

Pour man-db, c'est un réglage archlinux (qui a des mises à jours quotidiennes), nous nous sommes plutôt sur une mise à jour (de quelques man) par week-end !
Donc il est possible de régler le service énergivore en temps à une exécution par semaine :

# chaque lundi à 11h du mat
OnCalendar=
OnCalendar=Mon *-*-* 11:00:00
---
ps: comme d'habitude, je commente mes modifications pour pouvoir me comprendre une année après.

Démarrage un peu lent

#14Messageil y a 2 mois

Chalut !
nam1962 a écrit :Je trouve mon démarrage peu rapide
Cet article récentUne mise à jour du noyau Linux d'Ubuntu 18.04
cause un ralentissement du temps de démarrage sur quelques systèmes
m'a fait relire ton sujet.
Mais comme il semblerait que tu sois en 4.17... en principe ça n'a rien à voir.

Démarrage un peu lent

#15Messageil y a 2 mois

papjoke a écrit : Les timers ne sont pas lancés au petit matin mais si on n'indique pas d'heure (cas par défaut) ils sont lancé à minuit.
Avec persistent=true, si le pc est éteint, alors ils sont lancés au prochain démarrage.
Nous sommes bien d'accord. Ce qui m'embête perso, pour Manjaro uniquement car les archers savent ou devraient savoir modifier les paramètres des timers, c'est cette option OnBoot qui fait les updates pendant le démarrage alors que c'est le pire moment puisque c'est précisément à cet instant que le matériel est le plus sollicité et que les utilisateurs sont (voir le nombre de sujets, ici et ailleurs, sur la "lenteur du démarrage"), pour la plupart, très attentifs au temps de démarrage de leur machine. Ce que je veux dire en gros : Il serait bien que les devs de Manjaro se penchent sur ce problème, ancien mais récurent, en amont par l'ajout d'une surcouche (override.conf) sous forme d'un manjaro-script afin de résoudre cet encombrement du boot qui n'apporte que des retours négatifs. Je sais que la critique est aisée et qu'on me répondra à juste titre : "qu'attends-tu pour en faire la demande ?". Et bien tout simplement, honte sur moi, je ne vais que très rarement sur le forum inter. :oops: Pour conclure, je pense que tout ce qui permet d'éviter les écueils de Arch devrait être fait et c'est d'ailleurs la philosophie de notre chère distribution. Après, il est juste de rappeler que le team de manjaro est assez restreint mais je crois que ce sujet devrait, malgré tout, figurer au cahier des charges. :wink:

Démarrage un peu lent

#16Messageil y a 2 mois

ici tu ne parles que des timers ?

Nous n'en avons que très peu :wink:systemctl list-timers

Dont 2 très gros (relatif pour les ssd) : man-db et updatedb
Par défaut c'est réglé quotidiennement sur tous linux ; je ne pense donc pas que manjaro veille bien changer cet intervalle.
  • man-db
    Pour le plupart des utilisateurs il pourrait être réglé sur une mise à jour mensuelle vu l'intense utilisation du man de l'utilisateur classique
  • updatedb
    c'est la construction d'une base de donnée fichiers pour l'utilisation de locate. perso je suis à un lancement par semaine (c'est mal?) sans problème apparent.
    je n'utilise pas cette commande en console et j'ignore par quel programme elle est utilisée.
---
Soit nous faisons un timer à partir du boot OnBootSec soit à partir d'un calendrier (a confirmer mais c'est dans le man ...?).
ici, OnBootSec n'est pas intéressant, on ne va pas faire une maj 20 minutes après chaque boot : si l'on fait 4 boot par jour...
Malheureusement avec le calendrier, le timer se déclenche dès que la machine est disponible après la date/heure donnée. Seules les machines de travail ont des horaires ! pour un particulier qu'elle est la bonne heure ou risque d'être allumée la machine ??
Pour un particulier cela doit être 19h00 ou 22h00 ? Si manjaro la règle à 19h00, pour ceux qui allumerons leur machine après rien ne changera : se sera le boot du soir ; réglé à 22h00 pour certains le service sera lancé au premier boot du lendemain. A noter que si l'on ne démarre pas une fois par jour sa machine, alors quelque soit l'heure, nous aurons toujours le lancement au boot.
Il suffit de trouver le bon horaire, après on peut proposer à manjaro d'ajouter un fichier à l'iso type

etc/systemd/system/updatedb.timer.d/updatedb.timer.conf
[Timer]
OnCalender=
OnCalendar=19:00
Peut-être qu'une bonne solution serait de proposer un nouvel outil gui dans MSM pour régler simplement ces 2 timers ???

Démarrage un peu lent

#17Messageil y a 2 mois

papajoke : Peut-être qu'une bonne solution serait de proposer un nouvel outil gui dans MSM pour régler simplement ces 2 timers ???
Ce serait encore mieux en effet. :bien

Démarrage un peu lent

#18Messageil y a 2 mois

Erwan a écrit :
il y a 2 mois
papajoke : Peut-être qu'une bonne solution serait de proposer un nouvel outil gui dans MSM pour régler simplement ces 2 timers ???
Ce serait encore mieux en effet. :bien
Stacer ?

:mrgreen:

Démarrage un peu lent

#19Messageil y a 2 mois

:bjr: Concernant lvm2-monitor.service il est inutile de le désactiver (service static), il mangera toujours quelques secondes au démarrage. Et oui, systemd n'est pas ce que l'on fait de mieux niveau personnalisation :siffle

Démarrage un peu lent

#20Messageil y a 2 mois

:bjr: Merci d'avoir ouvert ce sujet, cela m'a permis de remettre un peu d'ordre dans le timer d'updatedb qui est tout à la fois gourmand et difficile à configurer. Du coup je l'ai modifié de manière à ce qu'il ne vienne jamais polluer le temps de démarrage de ma machine. :pompom:
Voici le résultat :

# /usr/lib/systemd/system/updatedb.timer
[Unit]
Description=Daily locate database update

[Timer]
OnCalendar=daily
AccuracySec=12h
Persistent=true

# /etc/systemd/system/updatedb.timer.d/override.conf
[Timer]
# 15 min après le boot et chaque jour à 20h15
OnCalendar=
OnCalendar=20:15
OnBootSec=15min
Persistent=false

A adapter cela les habitudes de chacun.
OnBootSec est facultatif si l'on est certain que la machine soit sur "on" à l'heure programmée. Une sécurité supplémentaire, donc. :sourire:

Répondre