J'ai l'habitude de transférer les photos numériques de mon Canon Ixus 700 vers l'ordinateur
avec Shotwell (dans sa version 0.26.3 à ce jour).
Pré-réglages : Paramètres > Disques amovibles et médias > Appareils photos
✘ Importer les photos numériques à la connexion
Avec les noyaux 4.4.101-1-MANJARO et 4.9.65-1-MANJARO tout est OK
− Shotwell est lancé après la connexion de l'APN,
− l'APN est visible et les photos sont importables.
Avec le noyau 4.14.2-1-MANJARO : #### ECHEC ! ####
− Shotwell n'est pas lancé après la connexion de l'APN
− si je lance shotwell manuellement, il ne voit pas l'APN.
Quelques vérifications en noyau 4.4 :
┌──[alain / ManjaroLinux 17.1pre3 (Hakoila) xfce x86_64 - 4.4.101-1-MANJARO / sdb6 de pcb2]
├── ~
└─> journalctl --no-pager -b | grep -i '/sys/devices/'
déc. 03 07:42:33 pcb2 mtp-probe[387]: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5"
déc. 03 07:42:33 pcb2 mtp-probe[390]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4"
déc. 03 07:42:44 pcb2 ModemManager[468]: <info> Couldn't check support for device at '/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0': not supported by any plugin
déc. 03 07:42:59 pcb2 ModemManager[468]: <warn> Couldn't create modem for device at '/sys/devices/pci0000:00/0000:00:16.3': Failed to find primary AT port
déc. 03 07:44:41 pcb2 mtp-probe[2202]: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5"
└─> lsusb | grep -i canon
Bus 002 Device 003: ID 04a9:30f2 Canon, Inc. Digital IXUS 700 (normal mode) / Digital IXUS 700 (PTP mode) / IXY Digital 600 (normal mode) / PowerShot SD500 (normal mode) /
┌──[alain / ManjaroLinux 17.1pre3 (Hakoila) xfce x86_64 - 4.4.101-1-MANJARO / sdb6 de pcb2]
├── ~
└─> sudo lsusb -s 002:003 -v
[sudo] Mot de passe de alain :
Bus 002 Device 003: ID 04a9:30f2 Canon, Inc. Digital IXUS 700 (normal mode) / Digital IXUS 700 (PTP mode) / IXY Digital 600 (normal mode) / PowerShot SD500 (normal mode) /
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x04a9 Canon, Inc.
idProduct 0x30f2 Digital IXUS 700 (normal mode) / Digital IXUS 700 (PTP mode) / IXY Digital 600 (normal mode) / PowerShot SD500 (normal mode) /
bcdDevice 0.02
iManufacturer 1 Canon Inc.
iProduct 2 Canon Digital Camera
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 6 Imaging
bInterfaceSubClass 1 Still Image Capture
bInterfaceProtocol 1 Picture Transfer Protocol (PIMA 15470)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered
┌──[alain / ManjaroLinux 17.1pre3 (Hakoila) xfce x86_64 - 4.4.101-1-MANJARO / sdb6 de pcb2]
┌──[alain / ManjaroLinux 17.1pre3 (Hakoila) xfce x86_64 - 4.14.2-1-MANJARO / sdb6 de pcb2]
├── ~
└─> journalctl --no-pager -b | grep -i '/sys/devices/'
déc. 03 07:59:17 pcb2 mtp-probe[362]: checking bus 3, device 3: "/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4"
déc. 03 07:59:17 pcb2 mtp-probe[363]: checking bus 3, device 4: "/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5"
déc. 03 07:59:28 pcb2 ModemManager[436]: <info> Couldn't check support for device at '/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0': not supported by any plugin
déc. 03 07:59:43 pcb2 ModemManager[436]: <warn> Couldn't create modem for device at '/sys/devices/pci0000:00/0000:00:16.3': Failed to find primary AT port
déc. 03 08:00:37 pcb2 mtp-probe[1534]: checking bus 4, device 3: "/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5"
déc. 03 08:00:37 pcb2 upowerd[919]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5
déc. 03 08:00:38 pcb2 upowerd[919]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0
déc. 03 08:00:38 pcb2 upowerd[919]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0
┌──[alain / ManjaroLinux 17.1pre3 (Hakoila) xfce x86_64 - 4.14.2-1-MANJARO / sdb6 de pcb2]
├── ~
└─> lsusb | grep -i canon
Bus 004 Device 003: ID 04a9:30f2 Canon, Inc. Digital IXUS 700 (normal mode) / Digital IXUS 700 (PTP mode) / IXY Digital 600 (normal mode) / PowerShot SD500 (normal mode) /
┌──[alain / ManjaroLinux 17.1pre3 (Hakoila) xfce x86_64 - 4.14.2-1-MANJARO / sdb6 de pcb2]
├── ~
└─> sudo lsusb -s 004:003 -v
[sudo] Mot de passe de alain :
Bus 004 Device 003: ID 04a9:30f2 Canon, Inc. Digital IXUS 700 (normal mode) / Digital IXUS 700 (PTP mode) / IXY Digital 600 (normal mode) / PowerShot SD500 (normal mode) /
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x04a9 Canon, Inc.
idProduct 0x30f2 Digital IXUS 700 (normal mode) / Digital IXUS 700 (PTP mode) / IXY Digital 600 (normal mode) / PowerShot SD500 (normal mode) /
bcdDevice 0.02
iManufacturer 1 Canon Inc.
iProduct 2 Canon Digital Camera
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 6 Imaging
bInterfaceSubClass 1 Still Image Capture
bInterfaceProtocol 1 Picture Transfer Protocol (PIMA 15470)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered
┌──[alain / ManjaroLinux 17.1pre3 (Hakoila) xfce x86_64 - 4.14.2-1-MANJARO / sdb6 de pcb2]