Problèmes et questions concernant le noyau et le support matériel.
#1Messageil y a 6 ansBonjour,
J'ai récemment fait l’acquisition d'un portable Samung R540 que j'ai installé sous manjaro XFCE x64.
Mais j'ai un soucis c'est la Luminosité qui est très faible sur l'écran impossible de l'augmenter ou de la baisser.
J'ai moi meme trouvé ceci :
sudo sed -i s/"\"quiet splash\""/"\"quiet splash acpi_osi=Linux acpi_backlight=vendor\""/g /etc/default/grub
cat /etc/default/grub | grep GRUB_CMDLINE_LINUX_DEFAULT
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux acpi_backlight=vendor"
Mais faire ce genre de manipulation sur manjaro est normalement inefficace car vu que le kernel ce met souvent a jour le grub aussi.
Donc si vous avez d'autres alternatives ou idées ?
Cordialement Manjaro XFCE x64 UEFI
Lenovo V110-15ISK / i3 6100 / SSD 120 Go / 8 Go Ram
Asus E200H / Intel Z8300 / SSD 32 Go / 4 Go Ram
Gigabytes Brix / Intel N3150 / SSD 120 Go / 4 Go Ram
PC : i3 6100 / SSD m.2 250 GO / 8 Go Ram DDR4 / GTX 1060
Venez sur riot : https://matrix.to/#/!vcMPooukQbVTsgCitB:matrix.org
Dernière modification par
liberodarkil y a 6 ans, modifié au total 1 fois.
#2Messageil y a 6 anstu pouvais simplement éditer le fichier avec ton éditeur préféré
Sinon pas de problème avec les mises à jour, ce fichier reste Manjaro STABLE - Linux lts - fish - Kde5 - icore N100 - 16Go RAM - ssd - efi
#mount /dev/archlinux /mnt/manjaro
#3Messageil y a 6 ansCe qui est bizarre c'est que j'ai fait la mise à jour et maintenant la luminosité est bien mais impossible de la regler.
Mais bon je vais clore le sujet vu que c'est réglé et ajouté ma correction pour le tearing. Manjaro XFCE x64 UEFI
Lenovo V110-15ISK / i3 6100 / SSD 120 Go / 8 Go Ram
Asus E200H / Intel Z8300 / SSD 32 Go / 4 Go Ram
Gigabytes Brix / Intel N3150 / SSD 120 Go / 4 Go Ram
PC : i3 6100 / SSD m.2 250 GO / 8 Go Ram DDR4 / GTX 1060
Venez sur riot : https://matrix.to/#/!vcMPooukQbVTsgCitB:matrix.org
#4Messageil y a 6 ansPour ce qui est du tearing je les corrigé avec :
sudo nano /etc/X11/xorg.conf.d/20-radeon.conf
Puis on colle :
Section "Device"
Identifier "Radeon"
Driver "radeon"
Option "AccelMethod" "glamor"
Option "DRI" "3"
Option "TearFree" "on"
Option "ColorTiling" "on"
Option "ColorTiling2D" "on"
EndSection
Attention il s'agit de la configuration pour les drivers open source !
Cordialement Manjaro XFCE x64 UEFI
Lenovo V110-15ISK / i3 6100 / SSD 120 Go / 8 Go Ram
Asus E200H / Intel Z8300 / SSD 32 Go / 4 Go Ram
Gigabytes Brix / Intel N3150 / SSD 120 Go / 4 Go Ram
PC : i3 6100 / SSD m.2 250 GO / 8 Go Ram DDR4 / GTX 1060
Venez sur riot : https://matrix.to/#/!vcMPooukQbVTsgCitB:matrix.org