Problèmes et questions concernant le noyau et le support matériel.
#1Messageil y a 6 ansBonjour,
Je voulais savoir si quelqu'un à eu mon soucis sur du Apollo Lake N3350.
Mon soucis est que je n'est pas le driver graphique qui n'est pas bien chargé sur manjaro xfce 17.0.4.
Voici ma config :
inxi -F
Resuming in non X mode: xrandr not found. For package install advice run: inxi --recommends
System: Host: pc-pc Kernel: 4.12.11-1-MANJARO x86_64 (64 bit) Desktop: N/A
Distro: Manjaro Linux
Machine: Device: laptop System: LENOVO product: 80TG v: Lenovo V110-15IAP
Mobo: LENOVO model: Lenovo V110-15IAP v: SDK0J40700 WIN
UEFI: LENOVO v: 1MCN40WW date: 05/17/2017
Battery BAT0: charge: 22.0 Wh 93.4% condition: 23.6/24.0 Wh (98%)
CPU: Dual core Intel Celeron N3350 (-MCP-) cache: 1024 KB
clock speeds: max: 2400 MHz 1: 2035 MHz 2: 2298 MHz
Graphics: Card: Intel Device 5a85
Display Server: N/A drivers: intel (unloaded: modesetting)
tty size: 80x24
Audio: Card Intel Celeron N3350/Pentium N4200/Atom E3900 Series Audio Cluster
driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k4.12.11-1-MANJARO
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8168
IF: enp1s0 state: down mac: 54:ee:75:d2:db:e8
Card-2: Intel Dual Band Wireless-AC 3165 Plus Bluetooth
driver: iwlwifi
IF: wlp2s0 state: up mac: 7c:67:a2:de:0f:03
Drives: HDD Total Size: 120.0GB (13.8% used)
ID-1: /dev/sda model: KINGSTON_SUV400S size: 120.0GB
Partition: ID-1: / size: 102G used: 8.3G (9%) fs: ext4 dev: /dev/sda2
ID-2: swap-1 size: 8.14GB used: 0.00GB (0%) fs: swap dev: /dev/sda3
Sensors: System Temperatures: cpu: 36.0C mobo: 36.0C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 155 Uptime: 1:47 Memory: 1320.6/3529.3MB Init: systemd
Client: Shell (bash) inxi: 2.3.27
Donc si vous avez une idée pour charger le driver correctement et supprimer le tearing ce serait super.
Cordialement Manjaro XFCE x64 UEFI
Lenovo V110-15ISK / i3 6100 / SSD 120 Go / 8 Go Ram
Asus E200H / Intel Z8300 / SSD 32 Go / 4 Go Ram
Gigabytes Brix / Intel N3150 / SSD 120 Go / 4 Go Ram
PC : i3 6100 / SSD m.2 250 GO / 8 Go Ram DDR4 / GTX 1060
Venez sur riot : https://matrix.to/#/!vcMPooukQbVTsgCitB:matrix.org
Dernière modification par
liberodarkil y a 6 ans, modifié au total 1 fois.
#2Messageil y a 6 ansbonjour.
tu as passé la commande suggerée dans inxi ?
a savoir
For package install advice run: inxi --recommends
System:
Host: HP8460P Kernel: 4.19.1-1-MANJARO x86_64 bits: 64
Desktop: Cinnamon 4.0.0 Distro: Manjaro Linux
Machine:
Type: Laptop System: Hewlett-Packard product: HP EliteBook 8460p
#3Messageil y a 6 ansbien sur mais cela na rien à voir c'est surtout que j'ai aucun fichier de configuration intel pour le driver actuellement. Manjaro XFCE x64 UEFI
Lenovo V110-15ISK / i3 6100 / SSD 120 Go / 8 Go Ram
Asus E200H / Intel Z8300 / SSD 32 Go / 4 Go Ram
Gigabytes Brix / Intel N3150 / SSD 120 Go / 4 Go Ram
PC : i3 6100 / SSD m.2 250 GO / 8 Go Ram DDR4 / GTX 1060
Venez sur riot : https://matrix.to/#/!vcMPooukQbVTsgCitB:matrix.org
#4Messageil y a 6 ansJ'ai donc trouvé le soucis :
Voici les opérations à effectuer :
Pour inxi sur les version 17.0.x de manjaro :
sudo pacman -S xorg-xrandr
sudo pacman -S xorg-xdpyinfo
Puis on peut refaire inxi -F
Ensuite pour le tearing :
sudo nano /etc/X11/xorg.conf.d/20-intel.conf
Puis coller (DRI2) :
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "DRI" "2" # DRI3 is now default
Option "TearFree" "true"
#Option "AccelMethod" "sna" # default
#Option "AccelMethod" "uxa" # fallback
EndSection
ou
Puis coller (DRI3) :
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "DRI" "3" # DRI3 is now default
Option "TearFree" "true"
Option "AccelMethod" "sna" # default
Option "AccelMethod" "uxa" # fallback
EndSection
Puis redémarrer lancer la commadne :
cat /var/log/Xorg.0.log | grep DRI
Pour voir si c'est bien activé.
DRI2 est recommandé si vous avez des soucis avec votre driver intel mieux vaut DRI3 pour les configurations récente.
Attention manjaro ne met plus en place le fichier
Ce qui je trouve est vraiment dommage.
Sachez aussi que faire une réinstallation du driver et voir les détails dans mhwd permet de connaitre votre configuration.
Mais il faudra créer votre fichier vous même.
Cordialement Manjaro XFCE x64 UEFI
Lenovo V110-15ISK / i3 6100 / SSD 120 Go / 8 Go Ram
Asus E200H / Intel Z8300 / SSD 32 Go / 4 Go Ram
Gigabytes Brix / Intel N3150 / SSD 120 Go / 4 Go Ram
PC : i3 6100 / SSD m.2 250 GO / 8 Go Ram DDR4 / GTX 1060
Venez sur riot : https://matrix.to/#/!vcMPooukQbVTsgCitB:matrix.org