-------------------------------------------------------------------------------- NAME VERSION FREEDRIVER TYPE -------------------------------------------------------------------------------- video-intel 2013.01.12 true PCI
Warning: No installed USB configs! [rozy@manjaro ~]$
CPU - Dell Precision 490 - Destop - Manjaro-Xfce x64 -
Carte graphique : NVIDIA Corporation NV41 [Quadro FX 3450/4000 SDI] (rev a2)
Carte de son : Intel Corporation 631xESB/632xESB High Definition Audio Controller (rev 09)
tu peux toujours essayer ceci, installer dkms si ce n'est pas déjà fait, ensuite dans
/etc/mkinitcpio.conf
tu rajoute ceci :
MODULES="i915"
puis tu finis par un :
mkinitcpio -p linux312
(xx a remplacer évidemment par la version du noyau installé) note modération : ==> J'ai mis linux312 puisque mn15 dit que c'est ce noyau qu'il utilise.
# vim:set ft=sh # MODULES # The following modules are loaded before any boot hooks are # run. Advanced users may wish to specify all system modules # in this array. For instance: # MODULES="piix ide_disk reiserfs" MODULES="i915"
# BINARIES # This setting includes any additional binaries a given user may # wish into the CPIO image. This is run last, so it may be used to # override the actual binaries included by a given hook # BINARIES are dependency parsed, so you may safely ignore libraries BINARIES=""
# FILES # This setting is similar to BINARIES above, however, files are added # as-is and are not parsed in any way. This is useful for config files. FILES=""
# HOOKS # This is the most important setting in this file. The HOOKS control the # modules and scripts added to the image, and what happens at boot time. # Order is important, and it is recommended that you do not change the # order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for # help on a given hook. # 'base' is _required_ unless you know precisely what you are doing. # 'udev' is _required_ in order to automatically load modules # 'filesystems' is _required_ unless you specify your fs modules in MODULES # Examples: ## This setup specifies all modules in the MODULES setting above. ## No raid, lvm2, or encrypted root is needed. # HOOKS="base" # ## This setup will autodetect all modules for your system and should ## work as a sane default # HOOKS="base udev autodetect block filesystems" # ## This setup will generate a 'full' image which supports most systems. ## No autodetection is done. # HOOKS="base udev block filesystems" # ## This setup assembles a pata mdadm array with an encrypted root FS. ## Note: See 'mkinitcpio -H mdadm' for more information on raid devices. # HOOKS="base udev block mdadm encrypt filesystems" # ## This setup loads an lvm2 volume group on a usb device. # HOOKS="base udev block lvm2 filesystems" # ## NOTE: If you have /usr on a separate partition, you MUST include the # usr, fsck and shutdown hooks. HOOKS="base udev autodetect modconf block pcmcia resume filesystems keyboard keym$
# COMPRESSION # Use this to compress the initramfs image. By default, gzip compression # is used. Use 'cat' to create an uncompressed image. #COMPRESSION="gzip" #COMPRESSION="bzip2" #COMPRESSION="lzma" #COMPRESSION="xz" #COMPRESSION="lzop" #COMPRESSION="lz4"
# COMPRESSION_OPTIONS # Additional options for the compressor #COMPRESSION_OPTIONS=""
modération ==> il faut employer les balises Code pour les retours, merci.
CPU - Dell Precision 490 - Destop - Manjaro-Xfce x64 -
Carte graphique : NVIDIA Corporation NV41 [Quadro FX 3450/4000 SDI] (rev a2)
Carte de son : Intel Corporation 631xESB/632xESB High Definition Audio Controller (rev 09)
Dernière modification par m_n15il y a 9 ans, modifié au total 1 fois.
j'ai rajouté dans ( File: /etc/mkinitcpio.conf ) --> ( mkinitcpio -p linux312 ) à la fin du fichier et rebooter et toujours la meme resolution .. ( maximun est 1024x768 )
[root@manjaro ~]# su - [root@manjaro ~]# mkinitcpio -p linux312 ==> Building image from preset: /etc/mkinitcpio.d/linux312.preset: 'default' -> -k /boot/vmlinuz-312-i686 -c /etc/mkinitcpio.conf -g /boot/initramfs-312-i686.img ==> ERROR: You appear to be calling a preset from a preset. This is a configuration error. ==> ERROR: Failed to read configuration `/etc/mkinitcpio.conf' ==> Building image from preset: /etc/mkinitcpio.d/linux312.preset: 'fallback' -> -k /boot/vmlinuz-312-i686 -c /etc/mkinitcpio.conf -g /boot/initramfs-312-i686-fallback.img -S autodetect ==> ERROR: You appear to be calling a preset from a preset. This is a configuration error. ==> ERROR: Failed to read configuration `/etc/mkinitcpio.conf' [root@manjaro ~]#
====================
File: /etc/mkinitcpio.conf
# vim:set ft=sh # MODULES # The following modules are loaded before any boot hooks are # run. Advanced users may wish to specify all system modules # in this array. For instance: # MODULES="piix ide_disk reiserfs" MODULES="i915"
# BINARIES # This setting includes any additional binaries a given user may # wish into the CPIO image. This is run last, so it may be used to # override the actual binaries included by a given hook # BINARIES are dependency parsed, so you may safely ignore libraries BINARIES=""
# FILES # This setting is similar to BINARIES above, however, files are added # as-is and are not parsed in any way. This is useful for config files. FILES=""
# HOOKS # This is the most important setting in this file. The HOOKS control the # modules and scripts added to the image, and what happens at boot time. # Order is important, and it is recommended that you do not change the # order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for # help on a given hook. # 'base' is _required_ unless you know precisely what you are doing. # 'udev' is _required_ in order to automatically load modules # 'filesystems' is _required_ unless you specify your fs modules in MODULES # Examples: ## This setup specifies all modules in the MODULES setting above. ## No raid, lvm2, or encrypted root is needed. # HOOKS="base" # ## This setup will autodetect all modules for your system and should ## work as a sane default # HOOKS="base udev autodetect block filesystems" # ## This setup will generate a 'full' image which supports most systems. ## No autodetection is done. # HOOKS="base udev block filesystems" # ## This setup assembles a pata mdadm array with an encrypted root FS. ## Note: See 'mkinitcpio -H mdadm' for more information on raid devices. # HOOKS="base udev block mdadm encrypt filesystems" # ## This setup loads an lvm2 volume group on a usb device. # HOOKS="base udev block lvm2 filesystems" # ## NOTE: If you have /usr on a separate partition, you MUST include the # usr, fsck and shutdown hooks. HOOKS="base udev autodetect modconf block pcmcia resume filesystems keyboard key$
# COMPRESSION # Use this to compress the initramfs image. By default, gzip compression # is used. Use 'cat' to create an uncompressed image. #COMPRESSION="gzip" #COMPRESSION="bzip2" #COMPRESSION="lzma" #COMPRESSION="xz" #COMPRESSION="lzop" #COMPRESSION="lz4"
# COMPRESSION_OPTIONS # Additional options for the compressor #COMPRESSION_OPTIONS=""
mkinitcpio -p linux312
CPU - Dell Precision 490 - Destop - Manjaro-Xfce x64 -
Carte graphique : NVIDIA Corporation NV41 [Quadro FX 3450/4000 SDI] (rev a2)
Carte de son : Intel Corporation 631xESB/632xESB High Definition Audio Controller (rev 09)
