Questions sur l'installation et la configuration de Manjaro Linux.
#1Messageil y a 5 ansBonjour,
J'aimerai installer Manjaro sur ce portable mais je n'y arrive pas. Je suis pourtant parvenu a installer Ubuntu sans problème après avoir réglé le bios. Cependant mon objectif est d'installer manjaro comme je l'ai fait sur mon ordinateur de bureau.
Descriptif du problème:
Quand j'ai booté sur la clef usb (manjaro), j'ai abouti a un message d'erreur: waiting 30 seconds for device /dev/disk/by-label/...
Si quelqu'un pouvait me donner une piste pour débloquer la situation, cela serait super
Edit: J'ai ensuite essaye d'appliquer la méthode https://forum.manjaro.org/t/how-to-boot ... bios/32721 mais j'arrive au message d'erreur boot error no boot device found #2Messageil y a 5 ansbonsoir tu as pris quel iso , saveur , version et date stp Macpro quad 2008 - Ati5770 - Xeon 2,8Ghz 8Go Os X 10.6.8 - Linux - Manjaro 22.0 Mate
Desktop - CPU : Ryzen 3 -5600x@3,7Ghz - RAM 16 Go - CM: X570 AORUS PRO( Xfce Testing)
CG : GeForce GTX 970- Nvidia v525 Audio: Starship/Matisse Audio Manjaro 21.1 Xfce Eth: Intel I211 Gigabit
#3Messageil y a 5 ans
manjaro-gnome-17.1.12-stable-x86_64 #4Messageil y a 5 ansMacpro quad 2008 - Ati5770 - Xeon 2,8Ghz 8Go Os X 10.6.8 - Linux - Manjaro 22.0 Mate
Desktop - CPU : Ryzen 3 -5600x@3,7Ghz - RAM 16 Go - CM: X570 AORUS PRO( Xfce Testing)
CG : GeForce GTX 970- Nvidia v525 Audio: Starship/Matisse Audio Manjaro 21.1 Xfce Eth: Intel I211 Gigabit
#5Messageil y a 5 ansMerci pour ton aide.
Alors j'ai utilise manjaro-gnome-18.0-beta3-testing-x86_64 avec exactement les même résultats.
Une idee ?
Edit: correction sur la version utilisée. #6Messageil y a 5 ansalors tu redemarres sur ubuntu
et tu nous communique
inxi -Fxxxz
1 y-a-t-il Windows dessus ?
2 option fast boot & legacy & csm désactivé ?
3 tester le démarrage avec ces 3 valeurs suivantes ,
en editant la ligne de commande boot et en ajoutant
acpi_osi!="Windows 2009"
puis ( si cela n'abouti pas )
acpi_osi!="Windows 2012"
puis ( si cela n'abouti pas )
acpi_osi!="Windows 2015"
cela pourrait aussi venir de là :
change SATA configuration in BIOS from RAID to AHCI in order to recognize SSD Macpro quad 2008 - Ati5770 - Xeon 2,8Ghz 8Go Os X 10.6.8 - Linux - Manjaro 22.0 Mate
Desktop - CPU : Ryzen 3 -5600x@3,7Ghz - RAM 16 Go - CM: X570 AORUS PRO( Xfce Testing)
CG : GeForce GTX 970- Nvidia v525 Audio: Starship/Matisse Audio Manjaro 21.1 Xfce Eth: Intel I211 Gigabit
#7Messageil y a 5 ansLa commande inxi -Fxxxz donne:
System:
Host: philippe-Lenovo-ideapad-120S Kernel: 4.15.0-34-generic x86_64
bits: 64 compiler: gcc v: 7.3.0 Desktop: Gnome 3.28.2 wm: gnome-shell
dm: GDM3 3.28.2 Distro: Ubuntu 18.04.1 LTS (Bionic Beaver)
Machine:
Type: Laptop System: LENOVO product: 81A5 v: Lenovo ideapad 120S-14IAP
serial: <filter> Chassis: type: 10 v: Lenovo ideapad 120S-14IAP
serial: <filter>
Mobo: LENOVO model: LNVNB161216 v: SDK0P29277WIN serial: <filter>
UEFI: LENOVO v: 6GCN26WW date: 03/08/2018
Battery:
ID-1: BAT1 charge: 31.2 Wh condition: 31.2/32.2 Wh (97%) volts: 8.6/7.5
model: LENOVO BASE-BAT type: Li-poly serial: <filter> status: Full
CPU:
Topology: Dual Core model: Intel Celeron N3350 bits: 64 type: MCP
arch: Goldmont rev: 9 L2 cache: 1024 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 4377
Speed: 1332 MHz min/max: 800/2400 MHz Core speeds (MHz): 1: 1822 2: 1708
Graphics:
Device-1: Intel vendor: Lenovo driver: i915 v: kernel bus ID: 00:02.0
chip ID: 8086:5a85
Display: x11 server: X.Org 1.19.6 driver: i915 compositor: gnome-shell
resolution: 1366x768~60Hz
Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
Device-1: Intel Celeron N3350/Pentium N4200/Atom E3900 Series Audio Cluster vendor: Lenovo driver: snd_hda_intel v: kernel bus ID: 00:0e.0
chip ID: 8086:5a98
Sound Server: ALSA v: k4.15.0-34-generic
Network:
Device-1: Intel Dual Band Wireless-AC 3165 Plus Bluetooth driver: iwlwifi
v: kernel bus ID: 02:00.0 chip ID: 8086:3166
IF: wlp2s0 state: up mac: <filter>
Drives:
Local Storage: total: 57.00 GiB used: 6.93 GiB (12.2%)
ID-1: /dev/mmcblk0 model: MMC64G size: 57.00 GiB serial: <filter> rev: 0x8
scheme: GPT
Partition:
ID-1: / size: 54.42 GiB used: 6.93 GiB (12.7%) fs: ext4 dev: /dev/dm-0
ID-2: swap-1 size: 980.0 MiB used: 0 KiB (0.0%) fs: swap dev: /dev/dm-1
Sensors:
Missing: Required tool sensors not installed. Check --recommends
Info:
Processes: 235 Uptime: 26m Memory: 3.68 GiB used: 1.35 GiB (36.6%)
Init: systemd v: 237 runlevel: 5 Compilers: gcc: N/A Shell: bash v: 4.4.19
running in: gnome-terminal inxi: 3.0.24
#8Messageil y a 5 ansbonjour
je comprends mieux pourquoi il ne le voit pas :
/dev/mmcblk , c'est une SD card
avec manjaro on a pas la garanti de gérer toutes les SD cards , s'il ne le voit pas c'est pas évident pour la suite ,
idem s'il ne parvient pas à le monter. Macpro quad 2008 - Ati5770 - Xeon 2,8Ghz 8Go Os X 10.6.8 - Linux - Manjaro 22.0 Mate
Desktop - CPU : Ryzen 3 -5600x@3,7Ghz - RAM 16 Go - CM: X570 AORUS PRO( Xfce Testing)
CG : GeForce GTX 970- Nvidia v525 Audio: Starship/Matisse Audio Manjaro 21.1 Xfce Eth: Intel I211 Gigabit
#9Messageil y a 5 ansMerci encore pour ton aide.
En fait, non j'utilise une clef usb. Une idée de ce qui se passe? #10Messageil y a 5 ansa priori la manjaro install ne parvient pas a accéder correctement à la carte SD ,
ce qui peut être tenter c'est les 3 options cités pour eviter de démarrages automatiques par le bios
qui verrouille certains composants et accès au démarrage
tu pourrai parvenir a démarrer dessus , mais faut il aussi voir la SD ensuite ,
il y a pas mal de souci pour la gestion SD sur manjaro.org Macpro quad 2008 - Ati5770 - Xeon 2,8Ghz 8Go Os X 10.6.8 - Linux - Manjaro 22.0 Mate
Desktop - CPU : Ryzen 3 -5600x@3,7Ghz - RAM 16 Go - CM: X570 AORUS PRO( Xfce Testing)
CG : GeForce GTX 970- Nvidia v525 Audio: Starship/Matisse Audio Manjaro 21.1 Xfce Eth: Intel I211 Gigabit
#11Messageil y a 5 ansBonjour,
Je ne sais pas si cela va t'aider car mes compétences sont très limités mais j'ai un lenovo qui ressemble au tiens.[c
System:
Host: lenovo Kernel: 4.18.0-1-amd64 x86_64 bits: 64 compiler: gcc v: 7.3.0
Console: tty 0 dm: LightDM 1.26.0 Distro: Debian GNU/Linux buster/sid
Machine:
Type: Laptop System: LENOVO product: 81A4 v: Lenovo ideapad 120S-11IAP
serial: <filter> Chassis: type: 10 v: Lenovo ideapad 120S-11IAP
serial: <filter>
Mobo: LENOVO model: LNVNB161216 v: SDK0P42934 WIN serial: <filter>
UEFI [Legacy]: LENOVO v: 6GCN20WW X64 date: 08/15/2017
Battery:
ID-1: BAT1 charge: 9.0 Wh condition: 31.1/32.2 Wh (96%) volts: 7.9/7.5
model: LENOVO BASE-BAT type: Li-poly serial: <filter> status: Charging
cycles: 12
CPU:
Topology: Dual Core model: Intel Celeron N3350 bits: 64 type: MCP
arch: Goldmont rev: 9 L1 cache: 56 KiB L2 cache: 1024 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 4377
Speed: 795 MHz min/max: 800/2400 MHz Core speeds (MHz): 1: 796 2: 796
Graphics:
Device-1: Intel vendor: Lenovo driver: i915 v: kernel bus ID: 00:02.0
chip ID: 8086:5a85
Display: server: X.org 1.20.1 driver: modesetting unloaded: fbdev,vesa
tty: 80x24
Message: Advanced graphics data unavailable in console for root.
Audio:
Device-1: Intel Atom/Celeron/Pentium Processor N4200/N3350/E3900 Series
Audio Cluster
vendor: Lenovo driver: snd_hda_intel v: kernel bus ID: 00:0e.0
chip ID: 8086:5a98
Sound Server: ALSA v: k4.18.0-1-amd64
Network:
Device-1: Intel Dual Band Wireless-AC 3165 Plus Bluetooth driver: iwlwifi
v: kernel bus ID: 02:00.0 chip ID: 8086:3166
IF: wlp2s0 state: up mac: <filter>
Drives:
Local Storage: total: 29.12 GiB used: 8.30 GiB (28.5%)
ID-1: /dev/mmcblk0 model: DF4032 size: 29.12 GiB serial: <filter> rev: 0x8
scheme: MBR
Partition:
ID-1: / size: 26.92 GiB used: 8.30 GiB (30.8%) fs: ext4
dev: /dev/mmcblk0p1
ID-2: swap-1 size: 1.64 GiB used: 0 KiB (0.0%) fs: swap
dev: /dev/mmcblk0p5
Sensors:
System Temperatures: cpu: 41.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 169 Uptime: 1m Memory: 1.59 GiB used: 684.0 MiB (41.9%)
Init: systemd v: 239 runlevel: 5 Compilers: gcc: 8.2.0 alt: 8 Shell: bash
v: 4.4.23 running in: tty 0 inxi: 3.0.24
J'ai insatallé debian buster dessus et viré windows.
Pour l'installation j'ai désactivé dans le bios
secure boot
et passé
boot mode
de
eufi a legacy support
Voilà pour moi pas de problèmes.
Bon courage
A plus. Desktop: Manjaro-xfce 64 dual boot windows10
Carte mère: Asus motherboard Z97-P
Carte graphique: VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] (rev a1)
Carte son: Intel Corporation 9 Series Chipset Family HD Audio Controller