Questions générales sur Manjaro Linux.
S'il vous plaît, avant de poster, essayez la fonction de recherche du forum.
Répondre

[réinstallation] Blocage accueil mot de passe

#1Messageil y a 3 ans

Bonjour à vous,

Je suis bloqué sur la page accueil, là ou j'indique le mot de passe de ma session.
reste figé.
Je ne peux plus intervenir sur redémarrer ou autre.
Seulement accès au TTY....
Autre info, quand je valide le mot de passe, c'est a ce moment que page d'accueil se fige.
Je suis sur KDE
Merci à vous de vos retours. :)
La mention [résolu] Image est réservée aux sujets ayant trouvé une solution.
Une réinstallation est un contournement qui ne permet pas de trouver une solution qui puisse être partagée.
J'ai donc modifié ton titre.
administration/modération
Dernière modification par atriazeil y a 3 ans, modifié au total 2 fois.
Haut

[réinstallation] Blocage accueil mot de passe

#2Messageil y a 3 ans

Bonjour

à tout hasard, sous quel noyau es-tu ?
Si tu es avec le 5.8, as-tu essayé de démarrer avec le 5.4 depuis le menu du grub ?

A+
Haut

[réinstallation] Blocage accueil mot de passe

#3Messageil y a 3 ans

Bonjour Kris,

non pas sur le 5.8, mais bien 5.4.....et je viens de réessayer.
Merci de ton retour :)
Haut

[réinstallation] Blocage accueil mot de passe

#4Messageil y a 3 ans

effectue cette vérification en tty 

sudo systemctl --failed
sudo journalctl -b 0 -p4
Haut

[réinstallation] Blocage accueil mot de passe

#5Messageil y a 3 ans

Bonjour Stéphane,

ok je viens de faire la manip demandé, 

[manjaro@manjaro ~]$ sudo systemctl --failed
  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.
[manjaro@manjaro ~]$ 


manjaro@manjaro ~]$ sudo journalctl -b 0 -p4
-- Logs begin at Sat 2020-10-03 11:14:03 UTC, end at Sat 2020-10-03 11:24:10 UTC. --
oct. 03 11:14:03 manjaro kernel: MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.h>
oct. 03 11:14:03 manjaro kernel: TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_a>
oct. 03 11:14:03 manjaro kernel:  #5 #6 #7
oct. 03 11:14:03 manjaro kernel: pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
oct. 03 11:14:03 manjaro kernel: ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
oct. 03 11:14:03 manjaro kernel: platform MSFT0101:00: failed to claim resource 1: [mem 0xfed40000-0xfed40fff]
oct. 03 11:14:03 manjaro kernel: acpi MSFT0101:00: platform device creation failed: -16
oct. 03 11:14:03 manjaro kernel: wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
oct. 03 11:14:03 manjaro kernel: wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
oct. 03 11:14:03 manjaro kernel: wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
oct. 03 11:14:03 manjaro kernel: wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
oct. 03 11:14:03 manjaro kernel: acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
oct. 03 11:14:03 manjaro kernel: i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
oct. 03 11:14:03 manjaro kernel: r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
oct. 03 11:14:03 manjaro kernel: usb: port power management may be unreliable
oct. 03 11:14:03 manjaro kernel: ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200110/nsargum>
oct. 03 11:14:03 manjaro kernel: ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200110/ns>
oct. 03 11:14:03 manjaro kernel: [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
oct. 03 11:14:03 manjaro kernel: nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 022554 [ IBUS ]
oct. 03 11:14:03 manjaro kernel: overlayfs: null uuid detected in lower fs '/', falling back to index=off,nfs_export=off.
oct. 03 11:14:03 manjaro kernel: tpm_crb MSFT0101:00: [Firmware Bug]: Bad ACPI memory layout
oct. 03 11:14:03 manjaro kernel: i2c_hid i2c-SYN1B7F:00: i2c-SYN1B7F:00 supply vdd not found, using dummy regulator
oct. 03 11:14:03 manjaro kernel: i2c_hid i2c-SYN1B7F:00: i2c-SYN1B7F:00 supply vddl not found, using dummy regulator
oct. 03 11:14:04 manjaro systemd-udevd[476]: cfg80211: Process '/usr/bin/set-wireless-regdom' failed with exit code 1.
oct. 03 11:14:04 manjaro systemd-udevd[477]: controlC0: Process '/usr/bin/alsactl restore 0' failed with exit code 99.
oct. 03 11:14:04 manjaro kernel: acer_wmi: Unknown function number - 6 - 1
oct. 03 11:14:06 manjaro kernel: uvcvideo 2-5:1.0: Entity type for entity Processing 2 was not initialized!
oct. 03 11:14:06 manjaro kernel: uvcvideo 2-5:1.0: Entity type for entity Camera 1 was not initialized!
oct. 03 11:14:06 manjaro kernel: uvcvideo 2-5:1.0: Entity type for entity Extension 3 was not initialized!
oct. 03 11:14:06 manjaro kernel: uvcvideo 2-5:1.2: Entity type for entity INV_EU_STRING was not initialized!
oct. 03 11:14:06 manjaro kernel: uvcvideo 2-5:1.2: Entity type for entity Camera 5 was not initialized!
oct. 03 11:14:08 manjaro kernel: kauditd_printk_skb: 18 callbacks suppressed
oct. 03 11:14:09 manjaro NetworkManager[850]: <warn>  [1601723649.5769] sup-iface[fd24839b7301a448,0,wlp6s0]: call-p2p-cancel: failed with P2P cancel fai>
oct. 03 11:14:13 manjaro kernel: kauditd_printk_skb: 16 callbacks suppressed
lines 1-35
passé par clef iso, car pas moyen de te retranscrire les lignes sur TTY
Haut

[réinstallation] Blocage accueil mot de passe

#6Messageil y a 3 ans

c'est un portable ou une tour bureau ?
tu peux fournir 

inxi Fza
- as tu plusieurs noyaux installés ?
- tu as pas mal d'anomalies acpi au démarrage , est-ce que windows est aussi installé dessus ?

je te conseille de passer sur le forum inter ,
passe par USB iso manjaro , avec terminal & navigateur
par chroot fourni 

sudo manjaro-chroot -a ( taper 1 si une seule ligne 0 apparait )
inxi -Fza 
journalctl -b -1 ( dernier démarrage sur le disque -1 )
cat /var/log/Xorg.0.log
exit
Haut

[réinstallation] Blocage accueil mot de passe

#7Messageil y a 3 ans

alors pour les info :
pas de windows
c'est un ordi portable ACER ASPIRE V 15 NITRO
Plusieurs noyau 4.19 - 5.4 - et 5.7
Dernière modification par atriazeil y a 3 ans, modifié au total 1 fois.
Haut

[réinstallation] Blocage accueil mot de passe

#8Messageil y a 3 ans

[manjaro@manjaro ~]$ sudo manjaro-chroot -a
==> Mounting (ManjaroLinux) [/dev/sda2]
 --> mount: [/mnt]
 --> mount: [/mnt/boot/efi]
 --> mount: [/mnt/home/data]
[manjaro /]# inxi -Fza 

12System:    12Kernel 5.6.11-1-MANJARO x86_64 12bits 64 12compiler gcc 12v 9.3.0 
           12parameters BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=fr_FR keytable=fr tz=UTC driver=free 
           nouveau.modeset=1 i915.modeset=1 radeon.modeset=1 misobasedir=manjaro 
           misolabel=MANJARO_KDE_2001 quiet systemd.show_status=1 apparmor=1 security=apparmor 
           12Console N/A 12wm kwin_x11 12Distro Manjaro Linux 
12Machine:   12Type Laptop 12System Acer 12product Aspire VN7-592G 12v V1.11 12serial <filter> 
           12Mobo Acer 12model Aspire VN7-592G 12v V1.11 12serial <filter> 12UEFI Insyde 12v 1.11 
           12date 06/28/2016 
12Battery:   12ID-1 BAT0 12charge 42.2 Wh 12condition 42.2/52.5 Wh (80%) 12volts 12.3/11.4 12model LGC AC14A8L 
           12type Li-ion 12serial <filter> 12status Not charging 
12CPU:       12Topology Quad Core 12model Intel Core i7-6700HQ 12socket U3E1 12bits 64 12type MT MCP 
           12arch Skylake-S 12family 6 12model-id 5E (94) 12stepping 3 12microcode D6 12L1 cache 256 KiB 
           12L2 cache 6144 KiB 12L3 cache 6144 KiB 
           12flags avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx 12bogomips 41621 
           12Speed 900 MHz 12min/max 800/3500 MHz 12base/boost 2500/8300 12volts 0.9 V 12ext-clock 100 MHz 
           12Core speeds (MHz) 121 900 122 900 123 900 124 900 125 900 126 900 127 900 128 900 
           12Vulnerabilities 12Type itlb_multihit 12status KVM: Split huge pages 
           12Type l1tf 12mitigation PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
           12Type mds 12mitigation Clear CPU buffers; SMT vulnerable 
           12Type meltdown 12mitigation PTI 
           12Type spec_store_bypass 
           12mitigation Speculative Store Bypass disabled via prctl and seccomp 
           12Type spectre_v1 12mitigation usercopy/swapgs barriers and __user pointer sanitization 
           12Type spectre_v2 12mitigation Full generic retpoline, IBPB: conditional, IBRS_FW, STIBP: 
           conditional, RSB filling 
           12Type tsx_async_abort 12mitigation Clear CPU buffers; SMT vulnerable 
12Graphics:  12Device-1 Intel HD Graphics 530 12vendor Acer Incorporated ALI 12driver i915 12v kernel 
           12bus ID 00:02.0 12chip ID 8086:191b 
           12Device-2 NVIDIA GM107M [GeForce GTX 960M] 12vendor Acer Incorporated ALI 12driver nouveau 
           12v kernel 12bus ID 01:00.0 12chip ID 10de:139b 
           12Device-3 Intel Intel RealSense Camera SR300 12type USB 12driver uvcvideo 12bus ID 2-5:2 
           12chip ID 8086:0aa5 
           12Display 12server X.org 1.20.9 12compositor kwin_x11 12driver modesetting,nvidia 
           12Message Advanced graphics data unavailable for root. 
12Audio:     12Device-1 Intel 100 Series/C230 Series Family HD Audio 12vendor Acer Incorporated ALI 
           12driver snd_hda_intel 12v kernel 12bus ID 00:1f.3 12chip ID 8086:a170 
           12Sound Server ALSA 12v k5.6.11-1-MANJARO 
12Network:   12Device-1 Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter 12vendor Lite-On 
           12driver ath10k_pci 12v kernel 12port 4000 12bus ID 06:00.0 12chip ID 168c:003e 
           12IF wlp6s0 12state up 12mac <filter> 
           12Device-2 Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
           12vendor Acer Incorporated ALI 12driver r8169 12v kernel 12port 3000 12bus ID 07:00.0 
           12chip ID 10ec:8168 
           12IF enp7s0 12state down 12mac <filter> 
12Drives:    12Local Storage 12total 1.03 TiB 12used 548.41 GiB (51.8%) 
           12ID-1 /dev/sda 12vendor LITE-ON 12model CV1-8B128 12size 119.24 GiB 12block size 12physical 512 B 
           12logical 512 B 12sata 3.1 12speed 6.0 Gb/s 12serial <filter> 12rev 201 
           12SMART yes 12state enabled 12health PASSED 12on 34d 18h 12cycles 4194 12read 127.2 MiB 
           12written 117.9 MiB 
           12ID-2 /dev/sdb 12vendor Toshiba 12model MQ01ABD100 12family 2.5" HDD MQ01ABD... 
           12size 931.51 GiB 12block size 12physical 4096 B 12logical 512 B 12sata 3.0 12speed 6.0 Gb/s 
           12rotation 5400 rpm 12serial <filter> 12rev 3J 12temp 26 C 
           12SMART yes 12state enabled 12health PASSED 12on 267d 4h 12cycles 4191 
           12ID-3 /dev/sdc 12type USB 12vendor Generic 12model USB Flash 12size 7.62 GiB 12block size 
           12physical 512 B 12logical 512 B 12serial <filter> 12rev 0.00 
           12SMART Message Unknown USB bridge. Flash drive/Unsupported enclosure? 
12Partition: 12ID-1 / 12raw size 30.27 GiB 12size 29.67 GiB (98.02%) 12used 21.93 GiB (73.9%) 12fs ext4 
           12block size 4096 B 12dev /dev/sda2 
12Swap:      12Alert No Swap data was found. 
12Sensors:   12System Temperatures 12cpu 42.0 C 12mobo N/A 12gpu nouveau 12temp 53 C 
           12Fan Speeds (RPM) N/A 
12Info:      12Processes 247 12Uptime 1h 33m 12Memory 15.51 GiB 12used 1.23 GiB (7.9%) 12Init systemd 12v 246 
           12Compilers 12gcc 10.2.0 12clang 10.0.1 12Packages 12apt 0 12pacman 1467 12lib 413 12flatpak 0 
           12Client Unknown Client: systemd 12inxi 3.1.05 
[manjaro /]# 
[manjaro /]# journalctl -b -1 ( dernier démarrage sur le disque -1 )
bash: syntax error near unexpected token `('
[manjaro /]# 
[manjaro /]# cat /var/log/Xorg.0.log
[     7.854] (--) Log file renamed from "/var/log/Xorg.pid-746.log" to "/var/log/Xorg.0.log"
[     7.856] 
X.Org X Server 1.20.9
X Protocol Version 11, Revision 0
[     7.856] Build Operating System: Linux Manjaro Linux
[     7.856] Current Operating System: Linux francois-aspirevn7592g 4.19.147-1-MANJARO #1 SMP Wed Sep 23 18:00:56 UTC 2020 x86_64
[     7.856] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19-x86_64 root=UUID=d7244b63-415a-49cd-a456-3cddb5c25cc3 rw quiet apparmor=1 security=apparmor udev.log_priority=3
[     7.856] Build Date: 02 September 2020  07:39:17AM
[     7.856]  
[     7.856] Current version of pixman: 0.40.0
[     7.856]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[     7.856] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     7.856] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct  3 12:09:04 2020
[     7.859] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     7.859] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     7.860] (==) ServerLayout "layout"
[     7.860] (==) No screen section available. Using defaults.
[     7.860] (**) |-->Screen "Default Screen Section" (0)
[     7.860] (**) |   |-->Monitor "<default monitor>"
[     7.860] (==) No device specified for screen "Default Screen Section".
        Using the first device section listed.
[     7.860] (**) |   |-->Device "nvidia"
[     7.860] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[     7.860] (==) Automatically adding devices
[     7.860] (==) Automatically enabling devices
[     7.860] (==) Automatically adding GPU devices
[     7.860] (==) Automatically binding GPU devices
[     7.860] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     7.862] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     7.862]    Entry deleted from font path.
[     7.862] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     7.862]    Entry deleted from font path.
[     7.863] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[     7.863]    Entry deleted from font path.
[     7.863]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[     7.863] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[     7.863]    Entry deleted from font path.
[     7.863]    (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[     7.863] (==) FontPath set to:
        /usr/share/fonts/misc,
        /usr/share/fonts/TTF
[     7.863] (==) ModulePath set to "/usr/lib/xorg/modules"
[     7.863] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[     7.863] (II) Module ABI versions:
[     7.863]    X.Org ANSI C Emulation: 0.4
[     7.863]    X.Org Video Driver: 24.1
[     7.863]    X.Org XInput driver : 24.1
[     7.863]    X.Org Server Extension : 10.0
[     7.863] (++) using VT number 1

[     7.863] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     7.864] (II) xfree86: Adding drm device (/dev/dri/card0)
[     7.864] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[     7.864] (II) xfree86: Adding drm device (/dev/dri/card1)
[     7.864] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[     8.528] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[     8.528] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[     8.529] (--) PCI:*(0@0:2:0) 8086:191b:1025:1039 rev 6, Mem @ 0x92000000/16777216, 0xa0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[     8.529] (--) PCI: (1@0:0:0) 10de:139b:1025:1039 rev 162, Mem @ 0x93000000/16777216, 0x50000000/268435456, 0x60000000/33554432, I/O @ 0x00004000/128
[     8.529] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     8.529] (II) "glx" will be loaded by default.
[     8.529] (II) LoadModule: "modesetting"
[     8.542] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     8.546] (II) Module modesetting: vendor="X.Org Foundation"
[     8.546]    compiled for 1.20.9, module version = 1.20.9
[     8.546]    Module class: X.Org Video Driver
[     8.546]    ABI class: X.Org Video Driver, version 24.1
[     8.546] (II) LoadModule: "glx"
[     8.546] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     8.561] (II) Module glx: vendor="X.Org Foundation"
[     8.561]    compiled for 1.20.9, module version = 1.0.0
[     8.561]    ABI class: X.Org Server Extension, version 10.0
[     8.561] (II) LoadModule: "nvidia"
[     8.562] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     8.570] (II) Module nvidia: vendor="NVIDIA Corporation"
[     8.570]    compiled for 1.6.99.901, module version = 1.0.0
[     8.570]    Module class: X.Org Video Driver
[     8.571] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     8.572] (II) NVIDIA dlloader X Driver  440.100  Fri May 29 08:21:27 UTC 2020
[     8.572] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     8.573] (WW) Falling back to old probe method for modesetting
[     8.574] (II) Loading sub module "fb"
[     8.574] (II) LoadModule: "fb"
[     8.574] (II) Loading /usr/lib/xorg/modules/libfb.so
[     8.576] (II) Module fb: vendor="X.Org Foundation"
[     8.576]    compiled for 1.20.9, module version = 1.0.0
[     8.576]    ABI class: X.Org ANSI C Emulation, version 0.4
[     8.576] (II) Loading sub module "wfb"
[     8.576] (II) LoadModule: "wfb"
[     8.576] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     8.577] (II) Module wfb: vendor="X.Org Foundation"
[     8.577]    compiled for 1.20.9, module version = 1.0.0
[     8.577]    ABI class: X.Org ANSI C Emulation, version 0.4
[     8.577] (II) Loading sub module "ramdac"
[     8.577] (II) LoadModule: "ramdac"
[     8.578] (II) Module "ramdac" already built-in
[     8.594] (II) modeset(G0): using drv /dev/dri/card1
[     8.594] (II) NVIDIA(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[     8.594] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[     8.594] (==) NVIDIA(0): RGB weight 888
[     8.594] (==) NVIDIA(0): Default visual is TrueColor
[     8.594] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     8.595] (**) Option "AllowNVIDIAGpuScreens"
[     8.595] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[     8.595] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[     8.595] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[     8.595] (**) NVIDIA(0): Enabling 2D acceleration
[     8.595] (II) Loading sub module "glxserver_nvidia"
[     8.595] (II) LoadModule: "glxserver_nvidia"
[     8.596] (II) Loading /usr/lib/xorg/modules/extensions/libglxserver_nvidia.so
[     8.660] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[     8.660]    compiled for 1.6.99.901, module version = 1.0.0
[     8.660]    Module class: X.Org Server Extension
[     8.661] (II) NVIDIA GLX Module  440.100  Fri May 29 08:19:01 UTC 2020
[     8.664] (II) NVIDIA: The X server supports PRIME Render Offload.
[     8.679] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 960M (GM107-A) at PCI:1:0:0 (GPU-0)
[     8.679] (--) NVIDIA(0): Memory: 4194304 kBytes
[     8.679] (--) NVIDIA(0): VideoBIOS: 82.07.9b.00.1a
[     8.679] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     8.679] (II) NVIDIA(0): Validated MetaModes:
[     8.679] (II) NVIDIA(0):     "NULL"
[     8.679] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[     8.679] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[     8.679] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[     8.679] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[     8.679] (==) modeset(G0): RGB weight 888
[     8.679] (==) modeset(G0): Default visual is TrueColor
[     8.679] (II) Loading sub module "glamoregl"
[     8.679] (II) LoadModule: "glamoregl"
[     8.680] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     8.696] (II) Module glamoregl: vendor="X.Org Foundation"
[     8.696]    compiled for 1.20.9, module version = 1.0.1
[     8.696]    ABI class: X.Org ANSI C Emulation, version 0.4
[     9.116] (II) modeset(G0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics 530 (SKL GT2)
[     9.116] (II) modeset(G0): glamor initialized
[     9.118] (II) modeset(G0): Output eDP-1-1 has no monitor section
[     9.385] (II) modeset(G0): Output DP-1-1 has no monitor section
[     9.824] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[     9.824] (II) modeset(G0): Output DP-1-2 has no monitor section
[    10.159] (II) modeset(G0): Output HDMI-1-2 has no monitor section
[    10.168] (II) modeset(G0): EDID for output eDP-1-1
[    10.168] (II) modeset(G0): Manufacturer: BOE  Model: 634  Serial#: 0
[    10.168] (II) modeset(G0): Year: 2015  Week: 1
[    10.168] (II) modeset(G0): EDID Version: 1.4
[    10.168] (II) modeset(G0): Digital Display Input
[    10.168] (II) modeset(G0): 6 bits per channel
[    10.168] (II) modeset(G0): Digital interface is DisplayPort
[    10.168] (II) modeset(G0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    10.168] (II) modeset(G0): Gamma: 2.20
[    10.168] (II) modeset(G0): No DPMS capabilities specified
[    10.168] (II) modeset(G0): Supported color encodings: RGB 4:4:4 
[    10.168] (II) modeset(G0): First detailed timing is preferred mode
[    10.168] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[    10.168] (II) modeset(G0): redX: 0.642 redY: 0.344   greenX: 0.318 greenY: 0.610
[    10.168] (II) modeset(G0): blueX: 0.149 blueY: 0.044   whiteX: 0.312 whiteY: 0.328
[    10.168] (II) modeset(G0): Manufacturer's mask: 0
[    10.168] (II) modeset(G0): Supported detailed timing:
[    10.168] (II) modeset(G0): clock: 139.8 MHz   Image Size:  344 x 194 mm
[    10.168] (II) modeset(G0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    10.168] (II) modeset(G0): v_active: 1080  v_sync: 1083  v_sync_end 1089 v_blanking: 1120 v_border: 0
[    10.168] (II) modeset(G0):  BOE HF
[    10.168] (II) modeset(G0):  NV156FHM-N43
[    10.168] (II) modeset(G0): EDID (in hex):
[    10.168] (II) modeset(G0):  00ffffffffffff0009e5340600000000
[    10.168] (II) modeset(G0):  0119010495221378024950a458519c26
[    10.168] (II) modeset(G0):  0b505400000001010101010101010101
[    10.168] (II) modeset(G0):  010101010101993680a0703828403020
[    10.168] (II) modeset(G0):  360058c21000001a0000000000000000
[    10.168] (II) modeset(G0):  00000000000000000000000000fe0042
[    10.168] (II) modeset(G0):  4f452048460a202020202020000000fe
Haut

[réinstallation] Blocage accueil mot de passe

#9Messageil y a 3 ans

 10.436] (II) modeset(G0): EDID for output DP-1-1
[    10.876] (II) modeset(G0): EDID for output HDMI-1-1
[    10.876] (II) modeset(G0): Manufacturer: AUS  Model: 27c0  Serial#: 14836
[    10.876] (II) modeset(G0): Year: 2018  Week: 39
[    10.876] (II) modeset(G0): EDID Version: 1.3
[    10.876] (II) modeset(G0): Digital Display Input
[    10.876] (II) modeset(G0): Max Image Size [cm]: horiz.: 60  vert.: 34
[    10.876] (II) modeset(G0): Gamma: 2.20
[    10.876] (II) modeset(G0): DPMS capabilities: Off
[    10.876] (II) modeset(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    10.876] (II) modeset(G0): First detailed timing is preferred mode
[    10.876] (II) modeset(G0): redX: 0.653 redY: 0.337   greenX: 0.320 greenY: 0.612
[    10.876] (II) modeset(G0): blueX: 0.150 blueY: 0.068   whiteX: 0.313 whiteY: 0.329
[    10.876] (II) modeset(G0): Supported established timings:
[    10.876] (II) modeset(G0): 720x400@70Hz
[    10.876] (II) modeset(G0): 640x480@60Hz
[    10.876] (II) modeset(G0): 640x480@67Hz
[    10.876] (II) modeset(G0): 640x480@72Hz
[    10.876] (II) modeset(G0): 640x480@75Hz
[    10.876] (II) modeset(G0): 800x600@56Hz
[    10.876] (II) modeset(G0): 800x600@60Hz
[    10.876] (II) modeset(G0): 800x600@72Hz
[    10.876] (II) modeset(G0): 800x600@75Hz
[    10.876] (II) modeset(G0): 832x624@75Hz
[    10.876] (II) modeset(G0): 1024x768@60Hz
[    10.876] (II) modeset(G0): 1024x768@70Hz
[    10.876] (II) modeset(G0): 1024x768@75Hz
[    10.876] (II) modeset(G0): 1280x1024@75Hz
[    10.876] (II) modeset(G0): Manufacturer's mask: 0
[    10.876] (II) modeset(G0): Supported standard timings:
[    10.876] (II) modeset(G0): #0: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    10.876] (II) modeset(G0): #1: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    10.876] (II) modeset(G0): #2: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    10.876] (II) modeset(G0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    10.876] (II) modeset(G0): #4: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    10.876] (II) modeset(G0): #5: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    10.876] (II) modeset(G0): #6: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    10.876] (II) modeset(G0): Supported detailed timing:
[    10.876] (II) modeset(G0): clock: 148.5 MHz   Image Size:  598 x 336 mm
[    10.876] (II) modeset(G0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    10.876] (II) modeset(G0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    10.876] (II) modeset(G0): Serial No: J9LMTJ014836
[    10.876] (II) modeset(G0): Ranges: V min: 50 V max: 75 Hz, H min: 24 H max: 83 kHz, PixClock max 175 MHz
[    10.876] (II) modeset(G0): Monitor name: ASUS VZ279HE
[    10.876] (II) modeset(G0): Supported detailed timing:
[    10.876] (II) modeset(G0): clock: 27.0 MHz   Image Size:  598 x 336 mm
[    10.876] (II) modeset(G0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[    10.876] (II) modeset(G0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[    10.876] (II) modeset(G0): Supported detailed timing:
[    10.876] (II) modeset(G0): clock: 74.2 MHz   Image Size:  598 x 336 mm
[    10.876] (II) modeset(G0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[    10.876] (II) modeset(G0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    10.876] (II) modeset(G0): Supported detailed timing:
[    10.876] (II) modeset(G0): clock: 74.2 MHz   Image Size:  598 x 336 mm
[    10.876] (II) modeset(G0): h_active: 1280  h_sync: 1720  h_sync_end 1760 h_blank_end 1980 h_border: 0
[    10.876] (II) modeset(G0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[    10.876] (II) modeset(G0): Supported detailed timing:
[    10.876] (II) modeset(G0): clock: 27.0 MHz   Image Size:  598 x 336 mm
[    10.876] (II) modeset(G0): h_active: 720  h_sync: 732  h_sync_end 796 h_blank_end 864 h_border: 0
[    10.876] (II) modeset(G0): v_active: 576  v_sync: 581  v_sync_end 586 v_blanking: 625 v_border: 0
[    10.876] (II) modeset(G0): Number of EDID sections to follow: 1
[    10.876] (II) modeset(G0): EDID (in hex):
[    10.876] (II) modeset(G0):  00ffffffffffff0006b3c027f4390000
[    10.876] (II) modeset(G0):  271c0103803c22782a53a5a756529c26
[    10.876] (II) modeset(G0):  115054bfef00d1c0b300950081808140
[    10.876] (II) modeset(G0):  81c0714f0101023a801871382d40582c
[    10.876] (II) modeset(G0):  450056502100001e000000ff004a394c
[    10.876] (II) modeset(G0):  4d544a3031343833360a000000fd0032
[    10.876] (II) modeset(G0):  4b185311000a202020202020000000fc
[    10.876] (II) modeset(G0):  004153555320565a32373948450a01d5
[    10.876] (II) modeset(G0):  02031a314f0102031112130414050e0f
[    10.876] (II) modeset(G0):  1d1e1f9065030c0010008c0ad08a20e0
[    10.876] (II) modeset(G0):  2d10103e9600565021000018011d0072
[    10.876] (II) modeset(G0):  51d01e206e28550056502100001e011d
[    10.876] (II) modeset(G0):  00bc52d01e20b828554056502100001e
[    10.876] (II) modeset(G0):  8c0ad090204031200c40550056502100
[    10.876] (II) modeset(G0):  00180000000000000000000000000000
[    10.876] (II) modeset(G0):  00000000000000000000000000000013
[    10.877] (II) modeset(G0): Printing probed modes for output HDMI-1-1
[    10.877] (II) modeset(G0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    10.877] (II) modeset(G0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    10.877] (II) modeset(G0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[    10.877] (II) modeset(G0): Modeline "1920x1080i"x60.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    10.877] (II) modeset(G0): Modeline "1920x1080i"x50.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    10.877] (II) modeset(G0): Modeline "1920x1080i"x59.9   74.18  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[    10.877] (II) modeset(G0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    10.877] (II) modeset(G0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    10.877] (II) modeset(G0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    10.877] (II) modeset(G0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    10.877] (II) modeset(G0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    10.877] (II) modeset(G0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    10.877] (II) modeset(G0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    10.877] (II) modeset(G0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    10.877] (II) modeset(G0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    10.877] (II) modeset(G0): Modeline "1440x576"x50.0   54.00  1440 1464 1592 1728  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    10.877] (II) modeset(G0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    10.877] (II) modeset(G0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    10.877] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    10.877] (II) modeset(G0): Modeline "1440x480"x60.0   54.05  1440 1472 1596 1716  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    10.877] (II) modeset(G0): Modeline "1440x480"x59.9   54.00  1440 1472 1596 1716  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    10.877] (II) modeset(G0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    10.877] (II) modeset(G0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    10.877] (II) modeset(G0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    10.877] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    10.877] (II) modeset(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    10.877] (II) modeset(G0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    10.877] (II) modeset(G0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    10.877] (II) modeset(G0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    10.877] (II) modeset(G0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    10.877] (II) modeset(G0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    10.877] (II) modeset(G0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    10.877] (II) modeset(G0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    10.877] (II) modeset(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    10.877] (II) modeset(G0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    10.877] (II) modeset(G0): EDID for output DP-1-2
[    11.219] (II) modeset(G0): EDID for output HDMI-1-2
[    11.219] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[    11.219] (==) modeset(G0): DPI set to (96, 96)
[    11.219] (II) Loading sub module "fb"
[    11.219] (II) LoadModule: "fb"
[    11.219] (II) Loading /usr/lib/xorg/modules/libfb.so
[    11.219] (II) Module fb: vendor="X.Org Foundation"
[    11.219]    compiled for 1.20.9, module version = 1.0.0
[    11.219]    ABI class: X.Org ANSI C Emulation, version 0.4
[    11.220] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[    11.220] (II) NVIDIA:     access.
[    11.222] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    11.222] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    11.222] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    11.222] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    11.222] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    11.222] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    11.222] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    11.222] (II) NVIDIA(0):     Config Options in the README.
[    11.248] (II) NVIDIA(0): Setting mode "NULL"
[    11.254] (==) NVIDIA(0): Disabling shared memory pixmaps
[    11.254] (==) NVIDIA(0): Backing store enabled
[    11.254] (==) NVIDIA(0): Silken mouse disabled
[    11.254] (==) NVIDIA(0): DPMS enabled
[    11.255] (II) Loading sub module "dri2"
[    11.255] (II) LoadModule: "dri2"
[    11.255] (II) Module "dri2" already built-in
[    11.255] (II) NVIDIA(0): [DRI2] Setup complete
[    11.255] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    11.275] (==) modeset(G0): Backing store enabled
[    11.275] (==) modeset(G0): Silken mouse disabled
[    11.395] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[    11.395] (==) modeset(G0): DPMS enabled
[    11.395] (II) modeset(G0): [DRI2] Setup complete
[    11.395] (II) modeset(G0): [DRI2]   DRI driver: iris
[    11.395] (II) modeset(G0): [DRI2]   VDPAU driver: va_gl
[    11.395] (II) Initializing extension Generic Event Extension
[    11.395] (II) Initializing extension SHAPE
[    11.396] (II) Initializing extension MIT-SHM
[    11.396] (II) Initializing extension XInputExtension
[    11.396] (II) Initializing extension XTEST
[    11.397] (II) Initializing extension BIG-REQUESTS
[    11.397] (II) Initializing extension SYNC
[    11.397] (II) Initializing extension XKEYBOARD
[    11.398] (II) Initializing extension XC-MISC
[    11.399] (II) Initializing extension SECURITY
[    11.399] (II) Initializing extension XFIXES
[    11.399] (II) Initializing extension RENDER
[    11.400] (II) Initializing extension RANDR
[    11.400] (II) Initializing extension COMPOSITE
[    11.401] (II) Initializing extension DAMAGE
[    11.401] (II) Initializing extension MIT-SCREEN-SAVER
[    11.401] (II) Initializing extension DOUBLE-BUFFER
[    11.401] (II) Initializing extension RECORD
[    11.402] (II) Initializing extension DPMS
[    11.402] (II) Initializing extension Present
[    11.402] (II) Initializing extension DRI3
[    11.403] (II) Initializing extension X-Resource
[    11.403] (II) Initializing extension XVideo
[    11.403] (II) Initializing extension XVideo-MotionCompensation
[    11.403] (II) Initializing extension GLX
[    11.403] (II) Initializing extension GLX
[    11.404] (II) Indirect GLX disabled.
[    11.404] (II) GLX: Another vendor is already registered for screen 0
[    11.404] (II) Initializing extension XFree86-VidModeExtension
[    11.404] (II) Initializing extension XFree86-DGA
[    11.404] (II) Initializing extension XFree86-DRI
[    11.404] (II) Initializing extension DRI2
[    11.405] (II) Initializing extension NV-GLX
[    11.405] (II) Initializing extension NV-CONTROL
[    11.726] (II) modeset(G0): Damage tracking initialized
[    11.821] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    11.821] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    11.821] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    11.821] (**) Power Button: Applying InputClass "system-keyboard"
[    11.821] (II) LoadModule: "libinput"
[    11.821] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    11.826] (II) Module libinput: vendor="X.Org Foundation"
Dernière modification par atriazeil y a 3 ans, modifié au total 1 fois.
Haut

[réinstallation] Blocage accueil mot de passe

#10Messageil y a 3 ans

[    11.821] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    11.826] (II) Module libinput: vendor="X.Org Foundation"
[    11.826]    compiled for 1.20.8, module version = 0.30.0
[    11.826]    Module class: X.Org XInput Driver
[    11.826]    ABI class: X.Org XInput driver, version 24.1
[    11.826] (II) Using input driver 'libinput' for 'Power Button'
[    11.826] (**) Power Button: always reports core events
[    11.826] (**) Option "Device" "/dev/input/event2"
[    11.826] (**) Option "_source" "server/udev"
[    11.831] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    11.831] (II) event2  - Power Button: device is a keyboard
[    11.831] (II) event2  - Power Button: device removed
[    11.880] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    11.880] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    11.880] (**) Option "xkb_model" "pc105"
[    11.880] (**) Option "xkb_layout" "fr"
[    11.903] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    11.903] (II) event2  - Power Button: device is a keyboard
[    11.903] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    11.904] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    11.904] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    11.904] (**) Video Bus: Applying InputClass "system-keyboard"
[    11.904] (II) Using input driver 'libinput' for 'Video Bus'
[    11.904] (**) Video Bus: always reports core events
[    11.904] (**) Option "Device" "/dev/input/event8"
[    11.904] (**) Option "_source" "server/udev"
[    11.904] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[    11.904] (II) event8  - Video Bus: device is a keyboard
[    11.904] (II) event8  - Video Bus: device removed
[    12.019] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13/event8"
[    12.019] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    12.019] (**) Option "xkb_model" "pc105"
[    12.019] (**) Option "xkb_layout" "fr"
[    12.022] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[    12.022] (II) event8  - Video Bus: device is a keyboard
[    12.024] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    12.024] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    12.024] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    12.024] (**) Video Bus: Applying InputClass "system-keyboard"
[    12.024] (II) Using input driver 'libinput' for 'Video Bus'
[    12.024] (**) Video Bus: always reports core events
[    12.024] (**) Option "Device" "/dev/input/event7"
[    12.024] (**) Option "_source" "server/udev"
[    12.027] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[    12.027] (II) event7  - Video Bus: device is a keyboard
[    12.028] (II) event7  - Video Bus: device removed
[    12.139] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input12/event7"
[    12.139] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    12.139] (**) Option "xkb_model" "pc105"
[    12.139] (**) Option "xkb_layout" "fr"
[    12.143] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[    12.143] (II) event7  - Video Bus: device is a keyboard
[    12.144] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    12.144] (II) No input driver specified, ignoring this device.
[    12.144] (II) This device may have been added with another device file.
[    12.145] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    12.145] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    12.146] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    12.146] (**) Sleep Button: Applying InputClass "system-keyboard"
[    12.146] (II) Using input driver 'libinput' for 'Sleep Button'
[    12.146] (**) Sleep Button: always reports core events
[    12.146] (**) Option "Device" "/dev/input/event1"
[    12.146] (**) Option "_source" "server/udev"
[    12.148] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    12.148] (II) event1  - Sleep Button: device is a keyboard
[    12.148] (II) event1  - Sleep Button: device removed
[    12.179] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    12.179] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    12.179] (**) Option "xkb_model" "pc105"
[    12.179] (**) Option "xkb_layout" "fr"
[    12.182] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    12.182] (II) event1  - Sleep Button: device is a keyboard
[    12.186] (II) config/udev: Adding input device Telink Wireless Receiver Mouse (/dev/input/event16)
[    12.186] (**) Telink Wireless Receiver Mouse: Applying InputClass "evdev pointer catchall"
[    12.186] (**) Telink Wireless Receiver Mouse: Applying InputClass "libinput pointer catchall"
[    12.186] (II) Using input driver 'libinput' for 'Telink Wireless Receiver Mouse'
[    12.186] (**) Telink Wireless Receiver Mouse: always reports core events
[    12.186] (**) Option "Device" "/dev/input/event16"
[    12.186] (**) Option "_source" "server/udev"
[    12.190] (II) event16 - Telink Wireless Receiver Mouse: is tagged by udev as: Mouse
[    12.190] (II) event16 - Telink Wireless Receiver Mouse: device is a pointer
[    12.190] (II) event16 - Telink Wireless Receiver Mouse: device removed
[    12.289] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:248A:8367.0002/input/input21/event16"
[    12.289] (II) XINPUT: Adding extended input device "Telink Wireless Receiver Mouse" (type: MOUSE, id 10)
[    12.290] (**) Option "AccelerationScheme" "none"
[    12.290] (**) Telink Wireless Receiver Mouse: (accel) selected scheme none/0
[    12.290] (**) Telink Wireless Receiver Mouse: (accel) acceleration factor: 2.000
[    12.290] (**) Telink Wireless Receiver Mouse: (accel) acceleration threshold: 4
[    12.292] (II) event16 - Telink Wireless Receiver Mouse: is tagged by udev as: Mouse
[    12.292] (II) event16 - Telink Wireless Receiver Mouse: device is a pointer
[    12.293] (II) config/udev: Adding input device Telink Wireless Receiver Mouse (/dev/input/mouse1)
[    12.293] (II) No input driver specified, ignoring this device.
[    12.293] (II) This device may have been added with another device file.
[    12.295] (II) config/udev: Adding input device Telink Wireless Receiver Consumer Control (/dev/input/event17)
[    12.295] (**) Telink Wireless Receiver Consumer Control: Applying InputClass "evdev keyboard catchall"
[    12.295] (**) Telink Wireless Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[    12.295] (**) Telink Wireless Receiver Consumer Control: Applying InputClass "system-keyboard"
[    12.295] (II) Using input driver 'libinput' for 'Telink Wireless Receiver Consumer Control'
[    12.295] (**) Telink Wireless Receiver Consumer Control: always reports core events
[    12.295] (**) Option "Device" "/dev/input/event17"
[    12.295] (**) Option "_source" "server/udev"
[    12.298] (II) event17 - Telink Wireless Receiver Consumer Control: is tagged by udev as: Keyboard
[    12.298] (II) event17 - Telink Wireless Receiver Consumer Control: device is a keyboard
[    12.298] (II) event17 - Telink Wireless Receiver Consumer Control: device removed
[    12.379] (II) libinput: Telink Wireless Receiver Consumer Control: needs a virtual subdevice
[    12.379] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:248A:8367.0002/input/input22/event17"
[    12.379] (II) XINPUT: Adding extended input device "Telink Wireless Receiver Consumer Control" (type: MOUSE, id 11)
[    12.380] (**) Option "AccelerationScheme" "none"
[    12.380] (**) Telink Wireless Receiver Consumer Control: (accel) selected scheme none/0
[    12.380] (**) Telink Wireless Receiver Consumer Control: (accel) acceleration factor: 2.000
[    12.380] (**) Telink Wireless Receiver Consumer Control: (accel) acceleration threshold: 4
[    12.384] (II) event17 - Telink Wireless Receiver Consumer Control: is tagged by udev as: Keyboard
[    12.384] (II) event17 - Telink Wireless Receiver Consumer Control: device is a keyboard
[    12.386] (II) config/udev: Adding input device Telink Wireless Receiver System Control (/dev/input/event18)
[    12.386] (**) Telink Wireless Receiver System Control: Applying InputClass "evdev keyboard catchall"
[    12.386] (**) Telink Wireless Receiver System Control: Applying InputClass "libinput keyboard catchall"
[    12.386] (**) Telink Wireless Receiver System Control: Applying InputClass "system-keyboard"
[    12.386] (II) Using input driver 'libinput' for 'Telink Wireless Receiver System Control'
[    12.386] (**) Telink Wireless Receiver System Control: always reports core events
[    12.386] (**) Option "Device" "/dev/input/event18"
[    12.386] (**) Option "_source" "server/udev"
[    12.390] (II) event18 - Telink Wireless Receiver System Control: is tagged by udev as: Keyboard
[    12.390] (II) event18 - Telink Wireless Receiver System Control: device is a keyboard
[    12.391] (II) event18 - Telink Wireless Receiver System Control: device removed
[    12.429] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:248A:8367.0002/input/input23/event18"
[    12.429] (II) XINPUT: Adding extended input device "Telink Wireless Receiver System Control" (type: KEYBOARD, id 12)
[    12.429] (**) Option "xkb_model" "pc105"
[    12.429] (**) Option "xkb_layout" "fr"
[    12.434] (II) event18 - Telink Wireless Receiver System Control: is tagged by udev as: Keyboard
[    12.434] (II) event18 - Telink Wireless Receiver System Control: device is a keyboard
[    12.436] (II) config/udev: Adding input device Telink Wireless Receiver (/dev/input/event19)
[    12.436] (**) Telink Wireless Receiver: Applying InputClass "evdev keyboard catchall"
[    12.436] (**) Telink Wireless Receiver: Applying InputClass "libinput keyboard catchall"
[    12.436] (**) Telink Wireless Receiver: Applying InputClass "system-keyboard"
[    12.436] (II) Using input driver 'libinput' for 'Telink Wireless Receiver'
[    12.436] (**) Telink Wireless Receiver: always reports core events
[    12.436] (**) Option "Device" "/dev/input/event19"
[    12.436] (**) Option "_source" "server/udev"
[    12.440] (II) event19 - Telink Wireless Receiver: is tagged by udev as: Keyboard
[    12.440] (II) event19 - Telink Wireless Receiver: device is a keyboard
[    12.441] (II) event19 - Telink Wireless Receiver: device removed
[    12.489] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:248A:8367.0003/input/input24/event19"
[    12.489] (II) XINPUT: Adding extended input device "Telink Wireless Receiver" (type: KEYBOARD, id 13)
[    12.489] (**) Option "xkb_model" "pc105"
[    12.489] (**) Option "xkb_layout" "fr"
[    12.494] (II) event19 - Telink Wireless Receiver: is tagged by udev as: Keyboard
[    12.494] (II) event19 - Telink Wireless Receiver: device is a keyboard
[    12.496] (II) config/udev: Adding input device Intel(R) RealSense(TM) Camera S (/dev/input/event20)
[    12.496] (**) Intel(R) RealSense(TM) Camera S: Applying InputClass "evdev keyboard catchall"
[    12.496] (**) Intel(R) RealSense(TM) Camera S: Applying InputClass "libinput keyboard catchall"
[    12.496] (**) Intel(R) RealSense(TM) Camera S: Applying InputClass "system-keyboard"
[    12.496] (II) Using input driver 'libinput' for 'Intel(R) RealSense(TM) Camera S'
[    12.496] (**) Intel(R) RealSense(TM) Camera S: always reports core events
[    12.496] (**) Option "Device" "/dev/input/event20"
[    12.496] (**) Option "_source" "server/udev"
[    12.499] (II) event20 - Intel(R) RealSense(TM) Camera S: is tagged by udev as: Keyboard
[    12.499] (II) event20 - Intel(R) RealSense(TM) Camera S: device is a keyboard
[    12.500] (II) event20 - Intel(R) RealSense(TM) Camera S: device removed
[    12.589] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input25/event20"
[    12.589] (II) XINPUT: Adding extended input device "Intel(R) RealSense(TM) Camera S" (type: KEYBOARD, id 14)
[    12.589] (**) Option "xkb_model" "pc105"
[    12.589] (**) Option "xkb_layout" "fr"
[    12.593] (II) event20 - Intel(R) RealSense(TM) Camera S: is tagged by udev as: Keyboard
[    12.593] (II) event20 - Intel(R) RealSense(TM) Camera S: device is a keyboard
[    12.595] (II) config/udev: Adding input device Intel(R) RealSense(TM) Camera S (/dev/input/event21)
[    12.595] (**) Intel(R) RealSense(TM) Camera S: Applying InputClass "evdev keyboard catchall"
[    12.595] (**) Intel(R) RealSense(TM) Camera S: Applying InputClass "libinput keyboard catchall"
[    12.595] (**) Intel(R) RealSense(TM) Camera S: Applying InputClass "system-keyboard"
[    12.595] (II) Using input driver 'libinput' for 'Intel(R) RealSense(TM) Camera S'
[    12.595] (**) Intel(R) RealSense(TM) Camera S: always reports core events
[    12.595] (**) Option "Device" "/dev/input/event21"
[    12.595] (**) Option "_source" "server/udev"
[    12.598] (II) event21 - Intel(R) RealSense(TM) Camera S: is tagged by udev as: Keyboard
[    12.599] (II) event21 - Intel(R) RealSense(TM) Camera S: device is a keyboard
[    12.599] (II) event21 - Intel(R) RealSense(TM) Camera S: device removed
[    12.669] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.2/input/input26/event21"
[    12.669] (II) XINPUT: Adding extended input device "Intel(R) RealSense(TM) Camera S" (type: KEYBOARD, id 15)
[    12.669] (**) Option "xkb_model" "pc105"
[    12.669] (**) Option "xkb_layout" "fr"
[    12.673] (II) event21 - Intel(R) RealSense(TM) Camera S: is tagged by udev as: Keyboard
[    12.673] (II) event21 - Intel(R) RealSense(TM) Camera S: device is a keyboard
[    12.675] (II) config/udev: Adding input device SYN1B7F:00 06CB:7407 Touchpad (/dev/input/event6)
[    12.675] (**) SYN1B7F:00 06CB:7407 Touchpad: Applying InputClass "evdev touchpad catchall"
[    12.675] (**) SYN1B7F:00 06CB:7407 Touchpad: Applying InputClass "libinput touchpad catchall"
[    12.675] (**) SYN1B7F:00 06CB:7407 Touchpad: Applying InputClass "touchpad"
[    12.675] (II) Using input driver 'libinput' for 'SYN1B7F:00 06CB:7407 Touchpad'
[    12.675] (**) SYN1B7F:00 06CB:7407 Touchpad: always reports core events
[    12.675] (**) Option "Device" "/dev/input/event6"
[    12.675] (**) Option "_source" "server/udev"
[    12.753] (II) event6  - SYN1B7F:00 06CB:7407 Touchpad: is tagged by udev as: Touchpad
[    12.756] (II) event6  - SYN1B7F:00 06CB:7407 Touchpad: device is a touchpad
[    12.756] (II) event6  - SYN1B7F:00 06CB:7407 Touchpad: device removed
[    12.829] (**) Option "Tapping" "on"
[    12.830] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYN1B7F:00/0018:06CB:7407.0001/input/input10/event6"
[    12.830] (II) XINPUT: Adding extended input device "SYN1B7F:00 06CB:7407 Touchpad" (type: TOUCHPAD, id 16)
[    12.833] (**) Option "AccelerationScheme" "none"
[    12.833] (**) SYN1B7F:00 06CB:7407 Touchpad: (accel) selected scheme none/0
[    12.833] (**) SYN1B7F:00 06CB:7407 Touchpad: (accel) acceleration factor: 2.000
[    12.833] (**) SYN1B7F:00 06CB:7407 Touchpad: (accel) acceleration threshold: 4
[    12.912] (II) event6  - SYN1B7F:00 06CB:7407 Touchpad: is tagged by udev as: Touchpad
[    12.916] (II) event6  - SYN1B7F:00 06CB:7407 Touchpad: device is a touchpad
[    12.918] (II) config/udev: Adding input device SYN1B7F:00 06CB:7407 Touchpad (/dev/input/mouse0)
[    12.918] (**) SYN1B7F:00 06CB:7407 Touchpad: Applying InputClass "touchpad"
[    12.918] (II) Using input driver 'libinput' for 'SYN1B7F:00 06CB:7407 Touchpad'
[    12.918] (**) SYN1B7F:00 06CB:7407 Touchpad: always reports core events
[    12.918] (**) Option "Device" "/dev/input/mouse0"
[    12.918] (**) Option "_source" "server/udev"
[    12.989] (II) mouse0  - not using input device '/dev/input/mouse0'.
[    12.989] (EE) libinput: SYN1B7F:00 06CB:7407 Touchpad: Failed to create a device for /dev/input/mouse0
[    12.989] (EE) PreInit returned 2 for "SYN1B7F:00 06CB:7407 Touchpad"
[    12.989] (II) UnloadModule: "libinput"
[    12.990] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[    12.990] (II) No input driver specified, ignoring this device.
[    12.990] (II) This device may have been added with another device file.
[    12.991] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[    12.991] (II) No input driver specified, ignoring this device.
[    12.991] (II) This device may have been added with another device file.
[    12.992] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[    12.992] (II) No input driver specified, ignoring this device.
[    12.992] (II) This device may have been added with another device file.
[    12.993] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event12)
[    12.993] (II) No input driver specified, ignoring this device.
[    12.993] (II) This device may have been added with another device file.
[    12.994] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event13)
[    12.994] (II) No input driver specified, ignoring this device.
[    12.994] (II) This device may have been added with another device file.
[    12.995] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event14)
[    12.995] (II) No input driver specified, ignoring this device.
[    12.995] (II) This device may have been added with another device file.
[    12.996] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event15)
[    12.996] (II) No input driver specified, ignoring this device.
[    12.996] (II) This device may have been added with another device file.
[    12.997] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    12.997] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    12.997] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    12.997] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[    12.997] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    12.997] (**) AT Translated Set 2 keyboard: always reports core events
[    12.997] (**) Option "Device" "/dev/input/event3"
[    12.997] (**) Option "_source" "server/udev"
[    13.000] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    13.000] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    13.003] (II) event3  - AT Translated Set 2 keyboard: device removed
[    13.049] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    13.049] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 17)
[    13.049] (**) Option "xkb_model" "pc105"
[    13.049] (**) Option "xkb_layout" "fr"
[    13.053] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    13.053] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    13.056] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    13.056] (II) No input driver specified, ignoring this device.
[    13.056] (II) This device may have been added with another device file.
[    13.058] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event5)
[    13.058] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    13.058] (**) Acer WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    13.058] (**) Acer WMI hotkeys: Applying InputClass "system-keyboard"
[    13.058] (II) Using input driver 'libinput' for 'Acer WMI hotkeys'
[    13.058] (**) Acer WMI hotkeys: always reports core events
[    13.058] (**) Option "Device" "/dev/input/event5"
[    13.058] (**) Option "_source" "server/udev"
[    13.060] (II) event5  - Acer WMI hotkeys: is tagged by udev as: Keyboard
[    13.060] (II) event5  - Acer WMI hotkeys: device is a keyboard
[    13.060] (II) event5  - Acer WMI hotkeys: device removed
[    13.109] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[    13.109] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 18)
[    13.109] (**) Option "xkb_model" "pc105"
[    13.109] (**) Option "xkb_layout" "fr"
[    13.112] (II) event5  - Acer WMI hotkeys: is tagged by udev as: Keyboard
[    13.112] (II) event5  - Acer WMI hotkeys: device is a keyboard
[    13.123] (**) Telink Wireless Receiver Consumer Control: Applying InputClass "evdev keyboard catchall"
[    13.123] (**) Telink Wireless Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[    13.123] (**) Telink Wireless Receiver Consumer Control: Applying InputClass "system-keyboard"
[    13.123] (II) Using input driver 'libinput' for 'Telink Wireless Receiver Consumer Control'
[    13.123] (**) Telink Wireless Receiver Consumer Control: always reports core events
[    13.123] (**) Option "Device" "/dev/input/event17"
[    13.123] (**) Option "_source" "_driver/libinput"
[    13.123] (II) libinput: Telink Wireless Receiver Consumer Control: is a virtual subdevice
[    13.123] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:248A:8367.0002/input/input22/event17"
[    13.123] (II) XINPUT: Adding extended input device "Telink Wireless Receiver Consumer Control" (type: KEYBOARD, id 19)
[    13.123] (**) Option "xkb_model" "pc105"
[    13.124] (**) Option "xkb_layout" "fr"
[    13.137] (EE) Failed to open authorization file "/var/run/sddm/{00b33484-4a09-4332-9a7c-52d6e258a2bd}": No such file or directory
[    40.833] (II) event2  - Power Button: device removed
[    40.890] (II) event8  - Video Bus: device removed
[    40.969] (II) event7  - Video Bus: device removed
[    41.049] (II) event1  - Sleep Button: device removed
[    41.089] (II) event16 - Telink Wireless Receiver Mouse: device removed
[    41.169] (II) event18 - Telink Wireless Receiver System Control: device removed
[    41.209] (II) event19 - Telink Wireless Receiver: device removed
[    41.249] (II) event20 - Intel(R) RealSense(TM) Camera S: device removed
[    41.329] (II) event21 - Intel(R) RealSense(TM) Camera S: device removed
[    41.429] (II) event6  - SYN1B7F:00 06CB:7407 Touchpad: device removed
[    41.529] (II) event3  - AT Translated Set 2 keyboard: device removed
[    41.569] (II) event5  - Acer WMI hotkeys: device removed
[    41.609] (II) event17 - Telink Wireless Receiver Consumer Control: device removed
[  3856.801] (II) UnloadModule: "libinput"
[  3856.801] (II) UnloadModule: "libinput"
[  3856.801] (II) UnloadModule: "libinput"
[  3856.801] (II) UnloadModule: "libinput"
[  3856.801] (II) UnloadModule: "libinput"
[  3856.801] (II) UnloadModule: "libinput"
[  3856.801] (II) UnloadModule: "libinput"
[  3856.801] (II) UnloadModule: "libinput"
[  3856.801] (II) UnloadModule: "libinput"
[  3856.801] (II) UnloadModule: "libinput"
[  3856.801] (II) UnloadModule: "libinput"
[  3856.801] (II) UnloadModule: "libinput"
[  3856.801] (II) UnloadModule: "libinput"
[  3856.802] (II) UnloadModule: "libinput"
[  3856.811] (II) NVIDIA(GPU-0): Deleting GPU-0
[  3856.838] (II) Server terminated successfully (0). Closing log file.
[manjaro /]# 
[manjaro /]# exit
exit
 --> umount: [/mnt/home/data]
 --> umount: [/mnt/boot/efi]
 --> umount: [/mnt]
Merci d'utiliser l'outil d'édition plutôt que d'empiler les messages les uns à la suite des autres.
administration/modération
Haut

[réinstallation] Blocage accueil mot de passe

#11Messageil y a 3 ans

Re-

As-tu essayé de redémarrer en 5.4 Fallback, voire en 4.19 ?
Est-ce que le problème est arrivé juste après une mise à jour ?
Est-ce que tu as installé les paquets nvidia propriétaires ?

Courage...

A+
Haut

[réinstallation] Blocage accueil mot de passe

#12Messageil y a 3 ans

Re kris

oui essais avec les différents noyaux que j'avais installés....mais idem
Pas de souci sur la dernière mise a jour, sauf pour un paquet .AUR....Davinci-resolve
Après la carte est installé avec les paquets nvidia propriétaires.

Bref je vais faire une réinstalle car besoin de la machine....
Haut

[réinstallation] Blocage accueil mot de passe

#13Messageil y a 3 ans

Haut
Répondre

Revenir à « Le Coin du Débutant »