Je suis passé de Mageia à Manjaro après un essai de Manjaro sous Virtualbox pour contrôle.
Tout fonctionnait bien sous Virtualbox, enfin le vérifiable.
Je suis sur une install fraîche sur un SSD neuf en UEFI.
Tout fonctionne sauf ma carte réseau filaire, qui refuse de fonctionner. j'ai fait plusieurs réinstall, essayé une install à partir d'une clé USB et d'un CD, avec vérification de la somme de contrôle du téléchargement et de la gravure.
J'ai lu pas mal de chose sur le forum concernant ma carte reseau : Realtek 8111 E. Ou plutôt pas mal de chose concernant son module et les carte réseau récalcitrantes.
J'ai lancé QQ commandes :
[occo@occo-pc ~]$ inxi -n
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8168
IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: _:_:_:_:_:_
Card-2: Qualcomm Atheros AR9227 Wireless Network Adapter driver: ath9k
IF: wlp7s5 state: down mac: _:_:_:_:_:_
[occo@occo-pc ~]$
[occo@occo-pc ~]$ lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge (rev 02)
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD/ATI] RD890S/RD990 I/O Memory Management Unit (IOMMU)
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GFX port 0)
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 0)
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 1)
00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 2)
00:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 3)
00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 5)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Barts XT [Radeon HD 6870]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Barts HDMI Audio [Radeon HD 6790/6850/6870 / 7720 OEM]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
03:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
04:00.0 SATA controller: JMicron Technology Corp. JMB362 SATA Controller (rev 10)
05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
06:00.0 SATA controller: JMicron Technology Corp. JMB362 SATA Controller (rev 10)
07:05.0 Network controller: Qualcomm Atheros AR9227 Wireless Network Adapter (rev 01)
07:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
[occo@occo-pc ~]$
Là je vous écris grâce à la carte WIFI qui, elle, fonctionne heureusement. Mais pour moi, il n'est pas question de rester en WIFI.
Je précise que ce système fonctionne à merveille sous Mageia 6 et sous Win 7.
Après avoir essayer plusieurs commande donc, j'en trouve une qui semble donner un résultat qui corrobore ce que j'observe : les leds d'actvités des connecteurs réseau du PC et de la box clignottent un peu timidement à l'initialisation puis plus rien.
Cette commande c'est : "sudo journalctl -b 0" qui a donné (entre autre !)
juin 06 21:21:42 occo-pc kernel: sp5100_tco: I/O address 0x0cd6 already in use
juin 06 21:21:42 occo-pc kernel: r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
juin 06 21:21:42 occo-pc kernel: r8168 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
juin 06 21:21:42 occo-pc mtp-probe[303]: checking bus 9, device 2: "/sys/devices/pci0000:00/0000:00:13.0/usb9/9-2"
juin 06 21:21:42 occo-pc mtp-probe[303]: bus: 9, device: 2 was not an MTP device
juin 06 21:21:42 occo-pc kernel: snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
juin 06 21:21:42 occo-pc kernel: input: PC Speaker as /devices/platform/pcspkr/input/input4
juin 06 21:21:42 occo-pc systemd[1]: Found device CT120BX300SSD1 3.
juin 06 21:21:42 occo-pc systemd[1]: Activating swap /dev/disk/by-uuid/47a57b7a-c41d-488a-a7ed-086411850436...
juin 06 21:21:42 occo-pc kernel: r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
juin 06 21:21:42 occo-pc kernel: r8168 Copyright (C) 2017 Realtek NIC software team <nicfae@realtek.com>
This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
juin 06 21:21:42 occo-pc mtp-probe[310]: checking bus 7, device 2: "/sys/devices/pci0000:00/0000:00:16.2/usb7/7-4"
juin 06 21:21:42 occo-pc kernel: input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input5
juin 06 21:21:42 occo-pc mtp-probe[310]: bus: 7, device: 2 was not an MTP device
juin 06 21:21:42 occo-pc systemd[1]: Found device CT120BX300SSD1 1.
juin 06 21:21:42 occo-pc systemd-udevd[283]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
juin 06 21:21:42 occo-pc systemd[1]: Found device WDC_WD1500HLHX-01JJPV0 2.
juin 06 21:21:42 occo-pc kernel: mousedev: PS/2 mouse device common for all mice
juin 06 21:21:42 occo-pc kernel: snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
juin 06 21:21:42 occo-pc kernel: snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
juin 06 21:21:42 occo-pc kernel: snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
juin 06 21:21:42 occo-pc kernel: snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
juin 06 21:21:42 occo-pc kernel: snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
juin 06 21:21:42 occo-pc kernel: snd_hda_codec_realtek hdaudioC0D0: inputs:
juin 06 21:21:42 occo-pc kernel: snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
juin 06 21:21:42 occo-pc kernel: snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
juin 06 21:21:42 occo-pc kernel: snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
juin 06 21:21:42 occo-pc kernel: input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
juin 06 21:21:42 occo-pc kernel: input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
juin 06 21:21:42 occo-pc kernel: input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
juin 06 21:21:42 occo-pc kernel: input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
juin 06 21:21:42 occo-pc kernel: input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
juin 06 21:21:42 occo-pc kernel: input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
juin 06 21:21:42 occo-pc kernel: input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
juin 06 21:21:42 occo-pc kernel: input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
juin 06 21:21:42 occo-pc kernel: AVX version of gcm_enc/dec engaged.
juin 06 21:21:42 occo-pc kernel: AES CTR mode by8 optimization enabled
juin 06 21:21:42 occo-pc kernel: clocksource: Switched to clocksource tsc
juin 06 21:21:42 occo-pc systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
juin 06 21:21:42 occo-pc systemd-udevd[273]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
juin 06 21:21:42 occo-pc kernel: asus_wmi: ASUS WMI generic driver loaded
juin 06 21:21:42 occo-pc kernel: r8168 0000:02:00.0 enp2s0: renamed from eth0
juin 06 21:21:42 occo-pc systemd[1]: Found device TOSHIBA_DT01ACA200 1.
juin 06 21:21:42 occo-pc kernel: Adding 10598364k swap on /dev/sda3. Priority:-1 extents:1 across:10598364k SSDscFS
juin 06 21:21:42 occo-pc kernel: asus_wmi: Initialization: 0x0
juin 06 21:21:42 occo-pc kernel: asus_wmi: BIOS WMI version: 0.9
juin 06 21:21:42 occo-pc kernel: asus_wmi: SFUN value: 0x0
juin 06 21:21:42 occo-pc kernel: input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input14
juin 06 21:21:42 occo-pc systemd-udevd[271]: Process '/usr/bin/set-wireless-regdom' failed with exit code 1.
Je crois comprendre qu'il faut que j'écrive la vitesse et le mode (duplex...) à la main dans le fichier de config de ma carte réseau, si QQ sait comment faire, ou a une autre idée, bien sur...